# Cement TOC Calculator MCP. AI Agent Connect

> Cement TOC Calculator MCP gives your AI client the math needed for wellbore operations. It handles complex volumetric calculations like Top of Cement depth, displacement requirements, and annular capacity. Instead of manual formulas, your agent uses these tools to account for hole size, casing, slurry volume, and washout to provide accurate engineering data.

## Overview
- **Category:** engineering
- **Price:** Free
- **Endpoint:** https://edge.vinkius.com/vk_preview_uf8V0DxsP8JQs27xhKzrl7VoLVgyC30Fs90z9kuf/ai-agent-connect
- **Tags:** cementing, wellbore, toc, drilling, volumetric

## Description

You can stop running manual volumetric checks for wellbore operations. This MCP gives your AI client the specific tools needed to handle cement job calculations with precision. When you're planning a job, your agent can determine the exact Top of Cement depth by factoring in hole size, casing diameter, slurry volume, and even washout or formation losses. 

It's built for the technical realities of drilling and cementing. You can use it to figure out how much fluid you'll need to move cement to its target position or to calculate the annular capacity for specific well sections. It also handles bottom fill volumes, so your agent can account for material occupying the bottom of the wellbore. By connecting this to your AI client, you turn a conversational interface into a specialized engineering calculator that understands the nuances of wellbore geometry and fluid displacement.

## Tools

### calculate_annular_capacity
This tool calculates the volume per unit of depth for a specific well section.

### calculate_bottom_fill
This tool determines the volume of material sitting at the bottom of the wellbore.

### calculate_displacement_requirements
This tool finds the exact amount of fluid needed to push cement to its target depth.

### calculate_toc_depth
This tool finds the depth where the cement surface reaches within the wellbore.

## Prompt Examples

**Prompt:** 
```
Calculate the TOC depth for a 12-inch hole with 9.625-inch casing, 100 cubic feet of slurry, and 5% washout.
```

**Response:** 
```
The calculated Top of Cement (TOC) depth is 450.25 feet.
```

**Prompt:** 
```
How much fluid is needed to displace cement to a target TOC of 500 feet in a 12-inch hole with 9.625-inch casing?
```

**Response:** 
```
The required displacement volume is 125.4 cubic feet.
```

**Prompt:** 
```
What is the volume of 10 feet of fill in a 12-inch hole?
```

**Response:** 
```
The fill volume for 10 feet of material in a 12-inch hole is 7.85 cubic feet.
```

## Capabilities

### TOC Depth Determination
Your agent calculates the cement surface depth by accounting for hole size and washout.

### Fluid Displacement Planning
The AI determines the fluid volume required to move cement to a specific target.

### Annular Capacity Math
Your agent computes the volume per unit of depth for any well section.

### Bottom Fill Assessment
The AI calculates the volume of material occupying the bottom of the wellbore.

## Use Cases

### Cement Job Planning
Calculate the exact slurry and displacement needed before a cement job begins.

### Washout Compensation
Adjust TOC depth calculations to account for hole enlargement.

### Wellbore Volume Audits
Check annular capacity and bottom fill volumes to ensure accurate fluid management.

### Target Depth Verification
Confirm that the cement will reach the required depth based on current hole conditions.

## Benefits

- Reduces manual calculation errors in wellbore geometry.
- Accounts for real-world variables like washout and formation losses.
- Provides instant volumetric data through a conversational interface.
- Speeds up displacement and fluid requirement planning.

## How It Works

Connect the MCP to your client and start asking for engineering data.

1. Connect your AI client to the Vinkius-hosted MCP.
2. Provide the wellbore parameters like hole size, casing, and slurry volume.
3. The agent calls the specific calculation tool needed.
4. You receive the calculated depth, volume, or capacity immediately.

## Frequently Asked Questions

**What can this MCP calculate?**
It calculates Top of Cement (TOC) depth, displacement requirements, annular capacity, and bottom fill volumes.

**Does it account for hole washout?**
Yes, the TOC depth tool accounts for washout and formation losses to provide accurate results.

**Which AI clients can I use with this MCP?**
You can use it with any MCP-compatible client like Claude, Cursor, Windsurf, or VS Code.

**Do I need to host the MCP myself?**
No, Vinkius hosts and manages the MCP for you. You just connect your client and start working.

**Can I use this for displacement volume math?**
Yes, the displacement tool calculates how much fluid is needed to move cement to its target position.