# Climbing Fall Factor Calculator AI Agent Connect

> Deterministic rock climbing physics and safety calculator.

## Overview
- **Category:** safety
- **Price:** Free
- **Endpoint:** https://edge.vinkius.com/vk_preview_A012HwvQW7qwTlc2Zs88wVf7BjkURHYQTc2VRTZM/ai-agent-connect
- **Tags:** climbing, physics, safety, uiaa, rock-climbing

## Description

This MCP server provides precise climbing physics calculations to assess fall risks. Use `calculate_fall_metrics` to determine the fall factor, impact force on the climber, protection force, and rope stretch. You can also use `validate_equipment_safety` to check if a fall scenario meets UIAA safety standards, or `compare_fall_scenarios` to evaluate different climbing setups side-by-side.

## Tools

### calculate_fall_metrics
Calculates the fundamental physics of a fall to determine risk and impact

### compare_fall_scenarios
Allows a user to compare the severity of two different fall setups

### validate_equipment_safety
Checks if the specific rope properties are suitable for the intended fall scenario

## Prompt Examples

**Prompt:** 
```
Calculate the metrics for a 3 meter fall with 10 meters of rope, a 75kg climber, and 30% dynamic elongation.
```

**Response:** 
```
The fall factor is 0.3, the impact force is 4.2 kN, the protection force is 5.1 kN, and the rope stretch is 0.85 meters.
```

**Prompt:** 
```
Is a fall with a factor of 1.5 and an impact force of 13 kN safe?
```

**Response:** 
```
No, the fall is not safe. It has a High Fall Factor and exceeds the UIAA Force Limit.
```

**Prompt:** 
```
Compare a 5m fall with 15m rope vs a 5m fall with 10m rope (70kg climber, 30% elongation).
```

**Response:** 
```
The scenario with 15m of rope is safer as it results in a lower impact force.
```

## Frequently Asked Questions

**How do I calculate the impact force of a fall?**
You can use the `calculate_fall_metrics` tool by providing the fall distance, rope length, climber mass, and rope dynamic elongation.

**What is considered a high-risk fall?**
A fall is flagged as high risk if the fall factor is greater than 1.0, which can be identified using `calculate_fall_metrics` or `validate_equipment_safety`.

**Can I compare two different climbing setups?**
Yes, use the `compare_fall_scenarios` tool to see the difference in impact force between two different sets of fall parameters.