# Concrete Formwork Deflection Calculator AI Agent Connect

> Calculate real-time deflection, stiffness requirements, and optimal support spacing for concrete formwork.

## Overview
- **Category:** construction
- **Price:** Free
- **Endpoint:** https://edge.vinkius.com/vk_preview_VZq774l4J0r3BWylHuF7djwaR463EqLeFZR716mu/ai-agent-connect
- **Tags:** concrete, formwork, deflection, structural-engineering, stiffness

## Description

This MCP server provides essential structural engineering tools to ensure the integrity of concrete formwork. It allows engineers to determine how much a setup will bend using `calculate_actual_deflection`, find the necessary flexural rigidity with `calculate_required_stiffness`, and determine the ideal distance between supports via `optimize_support_spacing`. Additionally, you can verify safety margins for various load scenarios using `validate_load_combination`.

## Tools

### calculate_actual_deflection
Determines how much a specific formwork setup will bend under a given load

### calculate_required_stiffness
Determines the minimum bending stiffness needed to meet a specific deflection target

### optimize_support_spacing
Finds the maximum distance between supports allowed to stay within deflection limits

### validate_load_combination
Checks if a combination of different loads stays within safety margins

## Prompt Examples

**Prompt:** 
```
Calculate the deflection for a 4 meter steel span with a load of 5 kN/m².
```

**Response:** 
```
The calculated deflection for the 4m steel span under a 5 kN/m² load is 2.45 mm.
```

**Prompt:** 
```
What is the maximum spacing for aluminum formwork with a 10 kN/m² load and 5mm allowable deflection?
```

**Response:** 
```
The recommended spacing for the aluminum formwork is 1.2 meters.
```

**Prompt:** 
```
Is a load of 15 kN/m² safe if my base load is 10 kN/m², live load is 4 kN/m², and safety factor is 1.2?
```

**Response:** 
```
Yes, the total design load is 16.8 kN/m², which is within the safe operating parameters.
```

## Frequently Asked Questions

**How do I find the best support spacing for my timber formwork?**
You can use the `optimize_support_spacing` tool. Provide the material type (e.g., timber), the expected load, and your allowable deflection limit to get the recommended spacing.

**Can I check if my load combination is safe?**
Yes, use `validate_load_combination` by providing the base load, live load, and your required safety factor to verify if the design is within safe limits.

**What is the difference between simple and continuous spans?**
A simple span is supported at two points, while a continuous span is supported at multiple points. You can specify this in `calculate_actual_deflection` to get an accurate bending calculation.