# Fuel Oil Blend Calculator AI Agent Connect

> Fuel Oil Blend Calculator MCP gives your AI client the technical math needed for heavy fuel oil blending. It uses non-linear blending indices to predict density, sulfur content, and viscosity. You can also check for physical compatibility to prevent sludge and generate compliance reports for standards like IMO 2020.

## Overview
- **Category:** engineering
- **Price:** Free
- **Endpoint:** https://edge.vinkius.com/vk_preview_j1OVZWjQVqEgu8mbMgW5vr9MX6Zv1WxFQtcyzX8K/ai-agent-connect
- **Tags:** fuel-oil, blending, viscosity, sulfur, compliance

## Description

You can now give your AI agent the ability to handle complex heavy fuel oil calculations. Instead of manually running formulas for density or sulfur content, you just provide the component data. This MCP handles the non-linear blending math to give you accurate predictions for your proposed blends. It helps you avoid the headache of sludge formation by checking if your components are physically compatible before you mix them. You can also adjust for temperature changes to see how viscosity will shift in real-time. When you need to verify that a blend meets regulatory requirements like IMO 2020, the MCP generates the necessary compliance reports. It turns your AI client into a specialized engineering tool for fuel management.

## Tools

### calculate_blend_properties
This tool calculates the primary physical characteristics of your proposed fuel oil blend.

### check_blend_compatibility
Use this to determine if the components you are mixing are physically compatible.

### get_blend_compliance_report
This tool compares your calculated blend properties against specific regulatory or technical standards.

### predict_viscosity_at_temperature
This tool predicts how the viscosity of your blend will change when you adjust the temperature.

## Prompt Examples

**Prompt:** 
```
Calculate the properties for a blend of 60% component A (density 980, sulfur 0.5, viscosity 380) and 40% component B (density 950, sulfur 1.2, viscosity 500).
```

**Response:** 
```
The calculated blend density is 968 kg/m3, the sulfur content is 0.78%, and the blend viscosity is 412 cSt.
```

**Prompt:** 
```
Is a blend of two oils with densities 950 and 1020 and viscosities 100 and 600 compatible?
```

**Response:** 
```
The blend has a High risk level due to significant differences in density and viscosity between the components.
```

**Prompt:** 
```
What will the viscosity be if I increase the temperature by 20 degrees for this blend?
```

**Response:** 
```
The predicted viscosity after a 20 degree temperature increase is 185 cSt.
```

## Capabilities

### Property Prediction
The AI calculates density, sulfur, and viscosity using non-linear indices.

### Stability Analysis
The AI checks if different fuel components will mix without forming sludge.

### Thermal Adjustments
The AI predicts viscosity changes based on specific temperature shifts.

### Regulatory Verification
The AI compares blend data against standards like IMO 2020.

## Use Cases

### Pre-blend Testing
Test a theoretical blend of multiple oils to see if it meets density and sulfur targets before physical mixing.

### Sludge Prevention
Run a compatibility check on two different fuel batches to ensure they won't cause stability issues.

### Temperature Modeling
Predict how a specific fuel blend will behave when heated to operating temperatures.

### Regulatory Auditing
Generate a compliance report to prove a fuel blend adheres to technical specifications.

## Benefits

- Reduces manual calculation errors in non-linear blending math.
- Prevents sludge formation by identifying incompatible fuel components.
- Speeds up regulatory reporting for IMO 2020 compliance.
- Provides instant viscosity adjustments for different operating temperatures.

## How It Works

Connect the MCP to your AI client and start running technical queries immediately.

1. Connect your preferred MCP-compatible client to Vinkius.
2. Provide the component properties like density, sulfur, and viscosity to your AI agent.
3. Ask the agent to calculate properties, check compatibility, or predict viscosity.
4. Receive precise technical results or compliance reports directly in your chat interface.

## Frequently Asked Questions

**What kind of fuel does this MCP calculate?**
This MCP is specifically designed for heavy fuel oil blending and technical property prediction.

**Can I use this with Claude or Cursor?**
Yes, you can connect this MCP to any MCP-compatible client including Claude, Cursor, and Windsurf.

**How does it handle non-linear blending?**
The MCP uses non-linear blending indices to predict properties like density and viscosity accurately.

**Does it help with IMO 2020 compliance?**
Yes, it includes a tool to generate compliance reports against regulatory standards like IMO 2020.

**Can it predict viscosity changes?**
Yes, the predict_viscosity_at_temperature tool calculates how viscosity shifts when you change the temperature.