# Kite Line Vibration Analyzer AI Agent Connect

> Calculate kite line natural frequency and resonance risk.

## Overview
- **Category:** engineering
- **Price:** Free
- **Endpoint:** https://edge.vinkius.com/vk_preview_YueoMXq6vTqcxc6BeF8uZ3mp99XqmGoR64E8qaSb/ai-agent-connect
- **Tags:** kite, vibration, resonance, physics, structural-integrity

## Description

This MCP server provides engineering tools to prevent structural failure in kite flying systems. It calculates the natural frequency of a line using `get_natural_frequency`, evaluates aeroelastic resonance risk with `evaluate_resonance_risk`, and determines necessary mitigation via `calculate_damping_requirement`. You can also retrieve material-specific mass data using `get_material_properties`.

## Tools

### calculate_damping_requirement
Determines the necessary damping characteristics to mitigate vibration

### evaluate_resonance_risk
Determines if the current wind conditions pose a danger of resonance

### get_material_properties
Provides standard mass-per-meter values based on line diameter and material type

### get_natural_frequency
Calculates the fundamental natural frequency of a kite line

## Prompt Examples

**Prompt:** 
```
What is the natural frequency of a 50m Nylon line with 100N tension and 0.01 kg/m mass?
```

**Response:** 
```
The natural frequency is 2.0 Hz.
```

**Prompt:** 
```
Is there a resonance risk if the wind gust frequency is 2.1 Hz and the natural frequency is 2.0 Hz?
```

**Response:** 
```
The risk level is Critical due to the high frequency proximity.
```

**Prompt:** 
```
What damping is needed for a High risk level at 2.0 Hz?
```

**Response:** 
```
A damping coefficient of 0.15 is required; it is recommended to use a heavier line or add a vibration dampener.
```

## Frequently Asked Questions

**How do I prevent line snap during high winds?**
Use `evaluate_resonance_risk` to check if wind gusts match the line's natural frequency, then use `calculate_damping_requirement` to find the necessary mitigation steps.

**Can I calculate mass per meter for Dyneema?**
Yes, use the `get_material_properties` tool and specify 'Dyneema' as the material type.

**What factors affect the natural frequency?**
The natural frequency is determined by the line length, the tension applied, and the mass per meter of the line.