# Pipeline Pressure Drop Calculator AI Agent Connect

> Calculate pressure losses, pumping power, and flow velocities in pipeline systems.

## Overview
- **Category:** engineering
- **Price:** Free
- **Endpoint:** https://edge.vinkius.com/vk_preview_B0L5sthXRnz8zJ9rqlOGLq4zD0pfySRzZ51hDDkh/ai-agent-connect
- **Tags:** hydraulics, pressure-drop, pumping-power, pipeline, fluid-flow

## Description

This MCP server provides specialized tools for hydraulic engineering and pipeline analysis. It allows AI agents to calculate fluid velocity using `get_flow_velocity`, determine frictional losses via `calculate_friction_loss` (supporting both Darcy-Weisbach and Hazen-Williams methods), and compute the net pressure change with `calculate_total_pressure_drop` by accounting for elevation changes. Additionally, it determines energy requirements through `calculate_pumping_power`. It is designed for both single-phase and multiphase flow scenarios, considering pipe roughness, fluid properties, and gravity.

## Tools

### calculate_friction_loss
Calculates the pressure drop specifically caused by pipe wall friction

### calculate_total_pressure_drop
Calculates the net pressure change by combining frictional losses and gravitational effects

### calculate_pumping_power
Determines the energy requirements to drive the fluid through the system

### get_flow_velocity
Determines the speed at which the fluid is moving through the pipe

## Prompt Examples

**Prompt:** 
```
What is the flow velocity for a pipe with a 0.5m diameter and a flow rate of 2 m³/s?
```

**Response:** 
```
The flow velocity is 10.19 m/s.
```

**Prompt:** 
```
Calculate the pressure drop for a 100m pipe, 0.2m diameter, 0.001m roughness, density 1000 kg/m³, viscosity 0.001 Pa·s, flow rate 0.1 m³/s using Darcy-Weisbach.
```

**Response:** 
```
The frictional pressure drop is 452.34 Pa with a Reynolds number of 20000.
```

**Prompt:** 
```
How much power is needed to move 0.5 m³/s of fluid against a 5000 Pa pressure drop with a pump efficiency of 0.8?
```

**Response:** 
```
The required pumping power is 3125.0 W.
```

## Frequently Asked Questions

**Which calculation methods are supported?**
The server supports the Darcy-Weisbach equation for general fluid types and the Hazen-Williams equation for water flow in pressure pipes.

**How does elevation affect the pressure drop?**
Using `calculate_total_pressure_drop`, the tool adds hydrostatic pressure changes to frictional losses. Uphill sections increase the required pressure, while downhill sections decrease it.

**Can I calculate the power needed for a pump?**
Yes, you can use `calculate_pumping_power` to find the required energy based on the total pressure drop, flow rate, and pump efficiency.