# Strap Insert Stress Calculator AI Agent Connect

> Calculates mechanical stress and pull-out risk for snowboard strap inserts.

## Overview
- **Category:** engineering
- **Price:** Free
- **Endpoint:** https://edge.vinkius.com/vk_preview_A6NxDJZCaXT5XfwYQGpSjVTjCUtFrZ1CAmnugbha/ai-agent-connect
- **Tags:** snowboard, stress-analysis, structural-integrity, hardware, impact-force

## Description

This MCP server provides technical tools to predict structural integrity for snowboard strap inserts during high-impact landings. By analyzing rider weight, landing impact force, and core properties, it determines the `stress_per_insert` and evaluates the `pullout_risk`. It also provides structural recommendations using `recommend_reinforcement` to ensure hardware remains secure in the board core.

## Tools

### assess_pullout_risk
Evaluates the likelihood of an insert being physically pulled out of the board core

### calculate_stress_load
Determines the mechanical stress applied to each individual insert in a given configuration

### get_material_properties
Provides the standard density values for different board core materials

### recommend_reinforcement
Suggests whether the hardware configuration is sufficient for the rider and the impact

## Prompt Examples

**Prompt:** 
```
Calculate the stress for a 75kg rider with a 5000N impact force using a dual pattern.
```

**Response:** 
```
The stress per insert is 2500N.
```

**Prompt:** 
```
What is the density of ash wood?
```

**Response:** 
```
The density value for ash is 0.65 g/cm³.
```

**Prompt:** 
```
Assess the pull-out risk for a 3000N load with a 10mm depth and 0.6 density.
```

**Response:** 
```
The risk level is low with a safety factor of 2.4.
```

## Frequently Asked Questions

**How is the stress per insert calculated?**
The `calculate_stress_load` tool calculates the stress by dividing the total landing impact force by the number of inserts defined in your chosen pattern.

**Can I check if my board core material is suitable?**
Yes, you can use `get_material_properties` to retrieve the standard density values for materials like poplar, ash, or polyurethane.

**What should I do if the risk level is high?**
If the risk is high, use `recommend_reinforcement` to get specific suggestions for structural support, such as using reinforced insert types or different patterns.