# Wine Temperature Stratification Model AI Agent Connect

> Models temperature gradients and predicts hot spots in fermentation tanks.

## Overview
- **Category:** agriculture
- **Price:** Free
- **Endpoint:** https://edge.vinkius.com/vk_preview_8Jdka6sekXyrcgfbfAq8x16KjZvSC4FojQupSh2i/ai-agent-connect
- **Tags:** winemaking, fermentation, thermal-modeling, temperature-control, agritech

## Description

This MCP server provides specialized thermal modeling for wine fermentation. It uses heat transfer and natural convection models to analyze vertical temperature distributions. By using `get_temperature_profile`, agents can identify thermal stratification. The `predict_hot_spots` tool identifies dangerous heat accumulation zones, while `calculate_mixing_needs` determines if interventions like pump-over or punch-down are required. Additionally, `evaluate_cooling_efficiency` assesses if the cooling jacket can manage the current fermentation load.

## Tools

### calculate_mixing_needs
Determines if and when manual intervention is required to prevent thermal issues

### evaluate_cooling_efficiency
Assesses how well the current cooling setup can handle the current fermentation load

### get_temperature_profile
Analyzes the vertical temperature distribution within a specific tank

### predict_hot_spots
Identifies specific zones within a tank where heat accumulation is likely to exceed safety thresholds

## Prompt Examples

**Prompt:** 
```
Analyze the temperature profile for a tank that is 5m high, 2m in diameter, with an ambient temperature of 20C and fermentation intensity of 0.8, with the jacket at the middle.
```

**Response:** 
```
The temperature profile shows a gradient of 1.2°C/m, with a cap temperature of 22.5°C and a maximum gradient of 1.2.
```

**Prompt:** 
```
Are there any hot spots in a 10m high, 3m diameter tank with high fermentation intensity (0.9) and a bottom jacket position?
```

**Response:** 
```
A hot spot is predicted in the upper zone (8m-10m depth) with an estimated temperature of 28.5°C, which is classified as high severity.
```

**Prompt:** 
```
Do I need to intervene in my fermentation tank?
```

**Response:** 
```
Yes, a pump-over is recommended because the temperature gradient has exceeded the target range.
```

## Frequently Asked Questions

**How can I identify if my tank has thermal stratification?**
You can use the `get_temperature_profile` tool to analyze the vertical temperature distribution and check for significant gradients.

**When should I perform a pump-over?**
The `calculate_mixing_needs` tool will recommend a pump-over if the temperature gradient or cap temperature exceeds the target range.

**Can this model predict heat accumulation?**
Yes, the `predict_hot_spots` tool identifies specific depth ranges where heat accumulation is likely to exceed safety thresholds.