Which Copilot surface supports this?

The custom MCP server path works in VS Code's Copilot Chat and in the Copilot CLI (copilot mcp add, with the config stored in your mcp-config.json). The consumer Copilot app uses built-in connectors and doesn't accept custom URLs today.

If I connect Carve Turn Radius to Copilot, can I use the same connection in Claude or ChatGPT later?

Yes, and that's the point: the connection is yours, not Copilot's. You paste the same link in any AI you use, and there's nothing new to set up or pay again. Connect a new AI and Carve Turn Radius is already there.

Do I need to hand my Carve Turn Radius password to Copilot?

Never. You sign in once at Vinkius, and we keep your logins encrypted and away from your AI. Copilot only ever sees the link, and you can remove it whenever you want.

What can I actually ask Copilot to do with Carve Turn Radius?

Whatever the Connector covers: check data, run actions and bring answers back into the session. The Connector page lists every capability your AI gains, with real examples you can copy.

Copilot doesn't show the Connector. What do I check?

Open the MCP list in your editor or run copilot mcp list, confirm the server was added with the link pasted exactly as copied, and confirm the Connector is active in your Vinkius account. A deactivated Connector stops responding.

Can I remove the access later?

Anytime. Remove the server from your MCP list (or your mcp-config.json) and it's out of your sessions. Your Vinkius account keeps the connection and its history either way, ready for the next AI.

How to give Microsoft Copilot access to Carve Turn Radius

Set up in seconds, once. From then on, Copilot gets things done for you: Carve Turn Radius becomes a custom MCP server in your Copilot, ready in every session.

Ask AI about this guide

Carve Turn Radius Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_JUn44blk1DzcObxs3WNFlDMNAARRRzQ2RabdvlRu/mcp

Connecting Carve Turn Radius to Copilot

About a minute, in VS Code's Copilot Chat

1In VS Code, open the Copilot Chat panel, click the tools icon and select the + icon, or run MCP: Add Server from the Command Palette.
2Choose your scope, name the server, and paste your Carve Turn Radius link as the server URL with HTTP transport.
3Confirm the server appears in your MCP list, then ask Copilot something real. Carve Turn Radius is now part of your Copilot.

Configuration · claude_desktop_config.jsonCopy

{
  "mcpServers": {
    "carve-turn-radius-physics-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_JUn44blk1DzcObxs3WNFlDMNAARRRzQ2RabdvlRu/mcp"
    }
  }
}

Microsoft Copilot + Carve Turn Radius

One chat. Your Carve Turn Radius, live inside Microsoft Copilot.

Real prompts, answered with live data. This is the kind of conversation you will have in Copilot once the server is in.

Waiting for input…

Works with modern AI clients that support MCP, including ChatGPT, Claude, Cursor, and more.

These prompts ship with the Carve Turn Radius Connector. Once yours is connected, they work in your sessions.

The full capability set, the prompts and the observed latency live on the Carve Turn Radius Connector page.

Mission Control

See everything your Microsoft Copilot agents do in Carve Turn Radius.

When Copilot runs a tool in Carve Turn Radius, it happens on Copilot's side: you see the result, but not the request itself, what data it carried, or whether a rule was broken.

Now every move lands on your screen.

Every execution is recorded, enforced, and shown to you: what ran, what it returned, what was blocked, and why.

AI Briefing

Upgrade to unlock

Know exactly what needs your attention before you even look at the charts. One briefing. The full picture. The next move.

Requests

Total in this period

Avg Latency

API 88ms · Overhead 54ms

Vinkius Reliability

Agent 280 · Upstream 47 · Vinkius 15

Tokens

AI tokens processed

DLP Protected

Sensitive data redacted

Cost Saved

FinOps truncations applied

AI Agents Activities

last 30 days

30d agotoday

Request Volume & Latency

requests latency

Every request your Microsoft Copilot agents make through Carve Turn Radius is logged, enforced and auditable. See how AI Governance turns agent activity into accountability, and what it means for your Carve Turn Radius workflows.

What sets us apart

It's not just the Connector that stays safe. Everything your agents do through it is.

Connecting Carve Turn Radius to your AI is step one. But an open line between your agents and Carve Turn Radius is only half the story: without protection, every action they take runs unguarded.

That's why protection doesn't stop at the door.

Every action your agents take through the Connector runs inside our infrastructure: signed activity logs, automatic key rotation, spending limits that pause instead of surprise, and a sandbox that isolates every execution.

Tamper Proof Activity Log

Every request your agents make in Carve Turn Radius is recorded and signed, so any change to the history becomes detectable.

Automatic Key Rotation

We rotate security keys every 24 hours. Your Carve Turn Radius connection stays protected without any manual work.

Spending Protection

We enforce the spending limit you choose and pause actions that exceed it until approval is received. Your Carve Turn Radius actions never surprise you.

Isolated Sandbox

Every execution through Carve Turn Radius runs isolated, with 34+ security rules covering memory, CPU, network access, file handling and execution.

Security Event Streaming

Security events flow to Splunk, Datadog or your own webhook, so Carve Turn Radius activity lands in the tools you already rely on.

Instant Resume

Idle connections resume in 3 to 5 ms while preserving their state, keeping your Microsoft Copilot sessions responsive.

Malicious File Protection

We detect compressed files designed to exhaust system resources and block them before they ever reach Carve Turn Radius.

Credential Validation

We test your Carve Turn Radius credentials before saving them. Invalid credentials are rejected instead of being stored.

Separate Usage Limits

Usage stays isolated per account, so activity in one connection never consumes another account's allowance.

One Connector, one link, and the whole operation is protected. Not just the connection: everything your agents do through it.

These guarantees are not add-ons: they are the infrastructure every Carve Turn Radius connection runs on. Read how our infrastructure protects everything your Microsoft Copilot agents do, end to end.

Inside Vinkius

Get Carve Turn Radius ready for your AI. It's easy.

You choose Carve Turn Radius from the Vinkius Catalog and get one connection link. That's it.

You choose Carve Turn Radius
You find Carve Turn Radius in the Catalog and install the Connector with one click.
Carve Turn Radius
Active
Enable Connector
Activating…
You add the link in Copilot
Vinkius gives you one connection link. In VS Code's Copilot Chat, you run MCP: Add Server, choose your scope, and paste the link as the server URL.
Token generated successfully
MCP Connection URL
https://edge.vinkius.com/vk_preview_JUn44blk1DzcObxs3WNFlDMNAARRRzQ2RabdvlRu/mcp
Connection Token
vk_live_••••••••
Go to Dashboard

Set it up once. Use Carve Turn Radius with the AI you already use.

FAQ

Copilot access questions.

01
Which Copilot surface supports this?
The custom MCP server path works in VS Code's Copilot Chat and in the Copilot CLI (copilot mcp add, with the config stored in your mcp-config.json). The consumer Copilot app uses built-in connectors and doesn't accept custom URLs today.
02
If I connect Carve Turn Radius to Copilot, can I use the same connection in Claude or ChatGPT later?
Yes, and that's the point: the connection is yours, not Copilot's. You paste the same link in any AI you use, and there's nothing new to set up or pay again. Connect a new AI and Carve Turn Radius is already there.
03
Do I need to hand my Carve Turn Radius password to Copilot?
Never. You sign in once at Vinkius, and we keep your logins encrypted and away from your AI. Copilot only ever sees the link, and you can remove it whenever you want.
04
What can I actually ask Copilot to do with Carve Turn Radius?
Whatever the Connector covers: check data, run actions and bring answers back into the session. The Connector page lists every capability your AI gains, with real examples you can copy.
05
Copilot doesn't show the Connector. What do I check?
Open the MCP list in your editor or run copilot mcp list, confirm the server was added with the link pasted exactly as copied, and confirm the Connector is active in your Vinkius account. A deactivated Connector stops responding.
06
Can I remove the access later?
Anytime. Remove the server from your MCP list (or your mcp-config.json) and it's out of your sessions. Your Vinkius account keeps the connection and its history either way, ready for the next AI.
More questions about Carve Turn Radius? The Connector page answers them. See everything the Carve Turn Radius Connector can do

About the Connector

What Carve Turn Radius adds to your AI.

Once you connect it, your AI gains 4 capabilities: the exact actions it can take in Carve Turn Radius when you ask. The Connector page lists every one of them in detail, alongside the latency we measure in production and prompts worth trying first.

See everything the Carve Turn Radius Connector can do