How do I use this MCP with Claude?

You connect the MCP through the Vinkius platform. Once connected, you can simply type your measurement questions directly into your Claude interface.

Can this calculate miter offsets for any angle?

Yes, the calculate_miter_offset capability works with any angle you provide to find the difference between the long and short points.

What is a miter offset?

It is the difference in length between the long point and the short point of an angled cut. This capability helps you mark your material correctly.

Does this work for metal fabrication too?

Yes, while often used in woodworking, the geometric calculations for diagonal spans and mitered edges apply to any material being cut at an angle.

Do I need to install anything on my computer?

No, Vinkius hosts the MCP. You only need to connect your AI client once to start using the capabilities.

How do I calculate the diagonal of a frame?

Use the calculate_diagonal_span capability by providing the width and height of your rectangular frame section.

Can this capability help with non-45 degree miter cuts?

Yes. Use calculate_mitered_edge_length and calculate_miter_offset to find the exact blade path and length difference for any valid angle.

What inputs are required for the miter offset calculation?

You need to provide the boardWidth (the width of your material) and the angleInDegrees (the angle of the miter cut).

An astronaut overseeing a futuristic data hub

Download PDF Markdown Version

Connect Diagonal Cut Pythagorean Calculator to your AI

Set it up once and it works in ChatGPT, Claude, Cursor, and any other client you love. It all runs safely in the background, so you can relax and focus on what really matters. Get exact measurements for angled cuts and frame assembly.

Ask AI about this Connector

Developed, maintained, and hosted by Vinkius.

MCP VERIFIED · PRODUCTION READY · VINKIUS GUARANTEED

Waiting for input…

Works with modern AI clients that support MCP, including ChatGPT, Claude, Cursor, and more.

Your AI does the work. We keep it safe and sound.

No other AI tool gives you this. Your workflow runs in the client you already love, your account stays protected, and you decide what the agent can and cannot do. It is the whole reason to make the switch.

Each Connector lives inside our infrastructure, the same place where your workflow runs. The three things below are already part of it, working quietly in the background so you never have to think about them. Nothing to add, nothing to set up, nothing to worry about.

V8 Isolate01

Each Connector runs inside its own sealed environment.

Each Connector runs inside its own sealed V8 runtime — no access to your files, your system, or other servers. A Connector never sees past its own request.

Kill Switch02

One switch stops every agent. Instantly.

One action deactivates every Connector, revokes every token, and ends every session at once. AI Governance keeps the record.

FinOps per User03

Spending limits that pause instead of surprise.

Every user keeps their own connections and credentials, isolated from everyone else. Anything that would cross your spending limit is held for your approval, not billed.

Three controls, built into the layer your AI connects through.

Curated set · 3 capabilities

We ship only the actions that matter.

Capability set01 / 01

01-03

3 capabilities in this set.

Part of 3 available through Diagonal Cut Pythagorean Calculator.

01
Calculate miter offset
Finds the distance between the long point and the short point of an angled cut. This helps you mark your material accurately before cutting.
02
Calculate diagonal span
Calculates the straight-line distance between opposite corners of a rectangular section. Use this to check if a frame is perfectly square.
03
Calculate mitered edge length
Determines the actual length of the saw cut face when passing through material at an angle. This is useful for calculating surface area or blade travel.

Real work

What teams actually run

Picture Frame Assembly

Calculate the diagonal span to verify a frame is square before gluing.

Angled Trim Work

Find the miter offset to mark the long and short points on a piece of molding.

Custom Furniture Fabrication

Determine the saw cut face length when working with thick timber at odd angles.

Metal Joint Prep

Use miter offsets to ensure angled metal tubing fits tightly against a base.

One connector, every AI

Diagonal Cut Pythagorean Calculator works with the most popular AI clients.

These are the most popular clients, each with a step-by-step guide: one link, set up once, with governance and visibility built in. And because everything runs on the MCP standard, the same connection also works in any other compatible client — nothing to rebuild.

Building your own app? The connector is yours to use.

You don't need a client to put Diagonal Cut Pythagorean Calculator to work: the same hosted connection plugs into your own applications and agent code, with the same governance on every request. Build with it, chat with it — one connection for both.

Observed, not estimated

723ms average. Fast in production.

Diagonal Cut Pythagorean Calculator is checked daily against the live service.

Daily averagePeak 983ms

Oct 3Today

Fastest day: 561ms
Slowest day: 983ms
14-day trend: Stable+3%

Connect your client

One URL. Every client.

Activate the Connector, copy your link, and paste it into the client you already use. 3 capabilities arrive ready to run.

Preview access · not provider authentication

The vk_preview_* token belongs to Vinkius preview infrastructure. It lets Claude discover and display the capabilities of Diagonal Cut Pythagorean Calculator, so you can see the experience inside your AI.

It does not authenticate your account with Diagonal Cut Pythagorean Calculator. Actions requiring credentials or live account data may not run until you activate the Connector and authorize the service.

Diagonal Cut Pythagorean Calculator Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_CeZNSW6m9CXaJtuni5T8JepNxESpwJ3kL4Ntpxxi/mcp

Claude Desktop

Follow the steps below to connect in seconds.

1In Claude Desktop, open Settings → Connectors.
2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
3Click Add and start a new chat — Diagonal Cut Pythagorean Calculator capabilities are ready to use.

Configuration · claude_desktop_config.jsonCopy

{
  "mcpServers": {
    "diagonal-cut-pythagorean-calculator-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_CeZNSW6m9CXaJtuni5T8JepNxESpwJ3kL4Ntpxxi/mcp"
    }
  }
}

Claude
ChatGPT
Cursor
VS Code
Windsurf
Claude Code
JetBrains
Cline

Step-by-step instructions for each client are in the guide. How to connect

Guided setup for Claude? Set up Diagonal Cut Pythagorean Calculator in Claude and other AIs

See all the AI clients this connector works with ↑

Who it's for

Built for the work Diagonal Cut Pythagorean Calculator owners hand off.

This MCP is designed for professionals working with physical materials that require high-precision angled cuts.

01
Woodworkers
They hand off frame dimensions and miter angles to get precise cut marks.
02
Metal Fabricators
They use the capability to calculate cut paths and offsets for angled joints.
03
Construction Estimators
They use the math to ensure material lengths account for mitered edges.

FAQ

Questions Diagonal Cut Pythagorean Calculator owners ask.

01
How do I use this MCP with Claude?
You connect the MCP through the Vinkius platform. Once connected, you can simply type your measurement questions directly into your Claude interface.
02
Can this calculate miter offsets for any angle?
Yes, the calculate_miter_offset capability works with any angle you provide to find the difference between the long and short points.
03
What is a miter offset?
It is the difference in length between the long point and the short point of an angled cut. This capability helps you mark your material correctly.
04
Does this work for metal fabrication too?
Yes, while often used in woodworking, the geometric calculations for diagonal spans and mitered edges apply to any material being cut at an angle.
05
Do I need to install anything on my computer?
No, Vinkius hosts the MCP. You only need to connect your AI client once to start using the capabilities.
06
How do I calculate the diagonal of a frame?
Use the calculate_diagonal_span capability by providing the width and height of your rectangular frame section.
07
Can this capability help with non-45 degree miter cuts?
Yes. Use calculate_mitered_edge_length and calculate_miter_offset to find the exact blade path and length difference for any valid angle.
08
What inputs are required for the miter offset calculation?
You need to provide the boardWidth (the width of your material) and the angleInDegrees (the angle of the miter cut).

Explore

More in Productivity

Connect Diagonal Cut Pythagorean Calculator to Claude, Cursor, ChatGPT & more

Your AI does the work. We keep it safe and sound.

Each Connector runs inside its own sealed environment.

One switch stops every agent. Instantly.

Spending limits that pause instead of surprise.

We ship only the actions that matter.

01-03

Calculate miter offset

Calculate diagonal span

Calculate mitered edge length

What teams actually run

Picture Frame Assembly

Angled Trim Work

Custom Furniture Fabrication

Metal Joint Prep

Building your own app? The connector is yours to use.

Diagonal Cut Pythagorean Calculator Connector

Claude Desktop

Woodworkers

Metal Fabricators

Construction Estimators

How do I use this MCP with Claude?

Can this calculate miter offsets for any angle?

What is a miter offset?

Does this work for metal fabrication too?

Do I need to install anything on my computer?

How do I calculate the diagonal of a frame?

Can this capability help with non-45 degree miter cuts?

What inputs are required for the miter offset calculation?

Quilting Block & Fabric Calculator AI Connector

Fabric Cost Calculator AI Connector

Woodworking Cut List Optimizer AI Connector

Rebar Fabrication Calculator AI Connector

Suggestions

DIY Angle Miter Calculator AI Connector

Precision Dilution Calculator AI Connector

Geometry Calculator AI Connector

Precision Ag ROI Calculator AI Connector