Download PDFMarkdown Version
ClaudeChatGPTPerplexityGeminiMicrosoft CopilotRaycastMeta AIGrokZ.aiQwenKimi
DeepSeekMistralCursorVS CodeWindsurfJetBrainsClineLovableVercel AI SDKLangChain

Use ESP Sizing Service with your AI.

Connect your account once and let the AI you already use work with it, without building another integration. Get precise pump configurations and electrical specs for your wells.

Included with plan

Ask AI about this Connector

Developed, maintained, and hosted by Vinkius.

MCP VERIFIED · PRODUCTION READY · VINKIUS GUARANTEED

Waiting for input…

Works with modern AI clients that support MCP, including ChatGPT, Claude, Cursor, and more.

ChatGPTClaudeCursorPerplexityGeminiMicrosoft CopilotRaycastMeta AI

Complete set · 4 capabilities

The complete ESP Sizing Service capability set.

These are the exact actions your AI can choose when you ask it to work with ESP Sizing Service.

Capability set01 / 01

01-04

4 capabilities in this set.

Part of 4 available through ESP Sizing Service.

  1. 01

    Get operating point

    This capability finds the equilibrium where reservoir delivery matches your system lifting needs.

  2. 02

    Calculate pump configuration

    This capability determines the specific hardware and physical requirements for the pump unit.

  3. 03

    Select electrical system

    This capability picks the necessary motor, cable, and surface control components.

  4. 04

    Validate system feasibility

    This capability checks your final configuration against operational safety and wellbore geometry constraints.

One connector, every AI

ESP Sizing Service works with the most popular AI clients.

These are the most popular clients, each with a step-by-step guide: one link, set up once, with governance and visibility built in. And because everything runs on the MCP standard, the same connection also works in any other compatible client — nothing to rebuild.

ClaudeClaudeChatGPTChatGPTGeminiGeminiPerplexityPerplexityGrokGrokMicrosoft CopilotMicrosoft CopilotCursorCursorVS CodeVS CodeWindsurfWindsurfJetBrainsJetBrainsClineClineLangChainLangChainVercel AI SDKVercel AI SDKLovableLovableZ.aiZ.aiRaycastRaycastQwen CodeQwen CodeKimi CodeKimi CodeLe ChatLe Chat

Building your own app? The connector is yours to use.

You don't need a client to put ESP Sizing Service to work: the same hosted connection plugs into your own applications and agent code, with the same governance on every request. Build with it, chat with it — one connection for both.

Observed, not estimated

691ms average. Fast in production.

ESP Sizing Service is checked daily against the live service.

Daily averagePeak 1062ms
Sep 11Today
Fastest day
686ms
Slowest day
1062ms
14-day trend
Improving-35%

Connect your client

One URL. Every client.

Activate the Connector, copy your link, and paste it into the client you already use. 4 capabilities arrive ready to run.

Preview access · not provider authentication

The vk_preview_* token belongs to Vinkius preview infrastructure. It lets Claude discover and display the capabilities of ESP Sizing Service, so you can see the experience inside your AI.

It does not authenticate your account with ESP Sizing Service. Actions requiring credentials or live account data may not run until you activate the Connector and authorize the service.

ESP Sizing Service Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_RgrEQjLidJrXddJNnX0hLjytZfidPkU9DbznW7J0/mcp

Claude Desktop

Follow the steps below to connect in seconds.

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — ESP Sizing Service capabilities are ready to use.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "esp-sizing-configuration-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_RgrEQjLidJrXddJNnX0hLjytZfidPkU9DbznW7J0/mcp"
    }
  }
}
  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

Step-by-step instructions for each client are in the guide. How to connect

Guided setup for Claude? link.label

See all the AI clients this connector works with ↑

Who it's for

Built for the work ESP Sizing Service owners hand off.

This MCP is built for petroleum engineers and production specialists who need to automate ESP design workflows.

  • 01

    Production Engineer

    Hands off reservoir data to the AI to get rapid pump sizing and electrical specs.

  • 02

    Field Engineer

    Uses the capability to validate if a proposed pump configuration fits the current wellbore setup.

  • 03

    Operations Manager

    Relies on the feasibility checks to ensure equipment choices meet safety constraints.

FAQ

Questions ESP Sizing Service owners ask.

  • 01

    What kind of data do I need to provide for pump sizing?

    You typically need inflow performance data, system head curves, target flow rates, and fluid properties like viscosity and gas content.

  • 02

    Does this MCP handle electrical components?

    Yes, it includes a capability to select the appropriate motor, cable, and VFD based on your depth and load.

  • 03

    Can it account for non-ideal fluid conditions?

    Yes, the pump configuration capability specifically accounts for viscosity derating and gas handling.

  • 04

    How does it ensure the design is safe?

    The validation capability checks the entire configuration against wellbore geometry and safety constraints.

  • 05

    Which AI clients can use this MCP?

    You can use this with any MCP-compatible client, including Claude, Cursor, Windsurf, and VS Code.

  • 06

    How does the capability handle high-viscosity fluids?

    The calculate_pump_configuration capability applies a viscosity derating factor to the pump performance curves to ensure the selected hardware can handle the increased resistance.

  • 07

    Can I validate if my pump fits in the wellbore?

    Yes, use the validate_system_feasibility capability. It checks the pump diameter and electrical system against the provided wellbore geometry and constraints.

  • 08

    What information is needed to find the operating point?

    You need to provide the inflow performance description and the system head curve description to the get_operating_point capability.

Explore

More in Engineering

Suggestions