Does this work across my workspaces?

Yes. Choose the User scope when adding the server and it's available in every workspace; Workspace scope keeps it in the current project only.

If I connect Orchard Frost Protection to Gemini, can I use the same connection in Claude or ChatGPT later?

Yes, and that's the point: the connection is yours, not Gemini's. You paste the same link in any AI you use, and there's nothing new to set up or pay again. Connect a new AI and Orchard Frost Protection is already there.

What does ZCode need to connect to Orchard Frost Protection?

Just the link. The hosted Connector handles access on our side, so you don't configure headers or tokens in ZCode. For remote services, the type is HTTP and the URL is your link.

What can I actually ask Gemini to do with Orchard Frost Protection?

Whatever the Connector covers: check data, run actions and bring answers back. The Connector page lists every capability your AI gains, with real examples you can copy.

Gemini doesn't show the Connector. What do I check?

Open Settings, MCP Servers and check the server is enabled, confirm the URL was pasted exactly as copied, and confirm the Connector is active in your Vinkius account. A deactivated Connector stops responding.

Can I remove the access later?

Remove the server in Settings, MCP Servers and it's out of your work. Your Vinkius account keeps the connection and its history either way, ready for the next AI.

How much water do I need for a 5-hectare orchard if the critical temperature is -2°C, the forecast low is -5°C, dew point is 0°C, wind speed is 5 km/h, and I have 100 cubic meters of water?What is the mortality risk if the temperature stays at -4°C for 6 hours when my critical temperature is -1°C?Compare protection methods for a 10-hectare orchard with a critical temperature of -1°C, forecast low of -4°C, and wind speed of 2 km/h.

Compare protection methods for a 10-hectare orchard with a critical temperature of -1°C, forecast low of -4°C, and wind speed of 2 km/h.What is the mortality risk if the temperature stays at -4°C for 6 hours when my critical temperature is -1°C?How much water do I need for a 5-hectare orchard if the critical temperature is -2°C, the forecast low is -5°C, dew point is 0°C, wind speed is 5 km/h, and I have 100 cubic meters of water?

How to give Z.ai access to Orchard Frost Protection

Set up in seconds, once. From then on, Z.ai gets things done for you: Orchard Frost Protection becomes an HTTP MCP server in ZCode, ready in every workspace.

Ask AI about this guide

Orchard Frost Protection Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_Ue5dCsgqsH5hgRoYbCsiyZdzyKVReXT85eZ65qaU/mcp

Connecting Orchard Frost Protection to Z.ai

About a minute, in ZCode settings

1Open Settings, MCP Servers, then click New MCP Server in the upper-right corner.
2Choose the User scope, name it, and keep the type as HTTP. Paste your Orchard Frost Protection link as the service URL. The link above is the URL.
3Click Add and confirm the server is enabled in the list, then ask something real. Orchard Frost Protection is now part of Z.ai.

Configuration · claude_desktop_config.jsonCopy

{
  "mcpServers": {
    "orchard-frost-protection-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_Ue5dCsgqsH5hgRoYbCsiyZdzyKVReXT85eZ65qaU/mcp"
    }
  }
}

Z.ai + Orchard Frost Protection

One chat. Your Orchard Frost Protection, live inside Z.ai.

Real prompts, answered with live data. This is the kind of session you will have in Z.ai once the server is in.

Waiting for input…

Works with modern AI clients that support MCP, including ChatGPT, Claude, Cursor, and more.

These prompts ship with the Orchard Frost Protection Connector. Once yours is connected, they work in your sessions.

The full capability set, the prompts and the observed latency live on the Orchard Frost Protection Connector page.

Mission Control

See everything your Z.ai agents do in Orchard Frost Protection.

When Z.ai runs a tool in Orchard Frost Protection, it happens on Z.ai's side: you see the result, but not the request itself, what data it carried, or whether a rule was broken.

Now every move lands on your screen.

Every execution is recorded, enforced, and shown to you: what ran, what it returned, what was blocked, and why.

AI Briefing

Upgrade to unlock

Know exactly what needs your attention before you even look at the charts. One briefing. The full picture. The next move.

Requests

Total in this period

Avg Latency

API 88ms · Overhead 54ms

Vinkius Reliability

Agent 280 · Upstream 47 · Vinkius 15

Tokens

AI tokens processed

DLP Protected

Sensitive data redacted

Cost Saved

FinOps truncations applied

AI Agents Activities

last 30 days

30d agotoday

Request Volume & Latency

requests latency

Every request your Z.ai agents make through Orchard Frost Protection is logged, enforced and auditable. See how AI Governance turns agent activity into accountability, and what it means for your Orchard Frost Protection workflows.

What sets us apart

It's not just the Connector that stays safe. Everything your agents do through it is.

Connecting Orchard Frost Protection to your AI is step one. But an open line between your agents and Orchard Frost Protection is only half the story: without protection, every action they take runs unguarded.

That's why protection doesn't stop at the door.

Every action your agents take through the Connector runs inside our infrastructure: signed activity logs, automatic key rotation, spending limits that pause instead of surprise, and a sandbox that isolates every execution.

Tamper Proof Activity Log

Every request your agents make in Orchard Frost Protection is recorded and signed, so any change to the history becomes detectable.

Automatic Key Rotation

We rotate security keys every 24 hours. Your Orchard Frost Protection connection stays protected without any manual work.

Spending Protection

We enforce the spending limit you choose and pause actions that exceed it until approval is received. Your Orchard Frost Protection actions never surprise you.

Isolated Sandbox

Every execution through Orchard Frost Protection runs isolated, with 34+ security rules covering memory, CPU, network access, file handling and execution.

Security Event Streaming

Security events flow to Splunk, Datadog or your own webhook, so Orchard Frost Protection activity lands in the tools you already rely on.

Instant Resume

Idle connections resume in 3 to 5 ms while preserving their state, keeping your Z.ai sessions responsive.

Malicious File Protection

We detect compressed files designed to exhaust system resources and block them before they ever reach Orchard Frost Protection.

Credential Validation

We test your Orchard Frost Protection credentials before saving them. Invalid credentials are rejected instead of being stored.

Separate Usage Limits

Usage stays isolated per account, so activity in one connection never consumes another account's allowance.

One Connector, one link, and the whole operation is protected. Not just the connection: everything your agents do through it.

These guarantees are not add-ons: they are the infrastructure every Orchard Frost Protection connection runs on. Read how our infrastructure protects everything your Z.ai agents do, end to end.

Inside Vinkius

Get Orchard Frost Protection ready for your AI. It's easy.

You choose Orchard Frost Protection from the Vinkius Catalog and get one connection link. That's it.

You choose Orchard Frost Protection
You find Orchard Frost Protection in the Catalog and install the Connector with one click.
Orchard Frost Protection
Active
Enable Connector
Activating…
You add the link in Z.ai
Vinkius gives you one connection link. In ZCode, you add an HTTP MCP server in Settings with the link as the service URL, and the connection is ready.
Token generated successfully
MCP Connection URL
https://edge.vinkius.com/vk_preview_Ue5dCsgqsH5hgRoYbCsiyZdzyKVReXT85eZ65qaU/mcp
Connection Token
vk_live_••••••••
Go to Dashboard

Set it up once. Use Orchard Frost Protection with the AI you already use.

FAQ

Z.ai access questions.

01
Does this work across my workspaces?
Yes. Choose the User scope when adding the server and it's available in every workspace; Workspace scope keeps it in the current project only.
02
If I connect Orchard Frost Protection to Gemini, can I use the same connection in Claude or ChatGPT later?
Yes, and that's the point: the connection is yours, not Gemini's. You paste the same link in any AI you use, and there's nothing new to set up or pay again. Connect a new AI and Orchard Frost Protection is already there.
03
What does ZCode need to connect to Orchard Frost Protection?
Just the link. The hosted Connector handles access on our side, so you don't configure headers or tokens in ZCode. For remote services, the type is HTTP and the URL is your link.
04
What can I actually ask Gemini to do with Orchard Frost Protection?
Whatever the Connector covers: check data, run actions and bring answers back. The Connector page lists every capability your AI gains, with real examples you can copy.
05
Gemini doesn't show the Connector. What do I check?
Open Settings, MCP Servers and check the server is enabled, confirm the URL was pasted exactly as copied, and confirm the Connector is active in your Vinkius account. A deactivated Connector stops responding.
06
Can I remove the access later?
Remove the server in Settings, MCP Servers and it's out of your work. Your Vinkius account keeps the connection and its history either way, ready for the next AI.
More questions about Orchard Frost Protection? The Connector page answers them. See everything the Orchard Frost Protection Connector can do

About the Connector

What Orchard Frost Protection adds to your AI.

Once you connect it, your AI gains 3 capabilities: the exact actions it can take in Orchard Frost Protection when you ask. The Connector page lists every one of them in detail, alongside the latency we measure in production and prompts worth trying first.

See everything the Orchard Frost Protection Connector can do