Does this work across my workspaces?

Yes. Choose the User scope when adding the server and it's available in every workspace; Workspace scope keeps it in the current project only.

If I connect PagerDuty Events to Gemini, can I use the same connection in Claude or ChatGPT later?

Yes, and that's the point: the connection is yours, not Gemini's. You paste the same link in any AI you use, and there's nothing new to set up or pay again. Connect a new AI and PagerDuty Events is already there.

What does ZCode need to connect to PagerDuty Events?

Just the link. The hosted Connector handles access on our side, so you don't configure headers or tokens in ZCode. For remote services, the type is HTTP and the URL is your link.

What can I actually ask Gemini to do with PagerDuty Events?

Whatever the Connector covers: check data, run actions and bring answers back. The Connector page lists every capability your AI gains, with real examples you can copy.

Gemini doesn't show the Connector. What do I check?

Open Settings, MCP Servers and check the server is enabled, confirm the URL was pasted exactly as copied, and confirm the Connector is active in your Vinkius account. A deactivated Connector stops responding.

Can I remove the access later?

Remove the server in Settings, MCP Servers and it's out of your work. Your Vinkius account keeps the connection and its history either way, ready for the next AI.

How to give Z.ai access to PagerDuty Events

Set up in seconds, once. From then on, Z.ai gets things done for you: PagerDuty Events becomes an HTTP MCP server in ZCode, ready in every workspace.

Ask AI about this guide

PagerDuty Events Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_kKI8TivX0k47Sbfm98eG7QAfs3djX089vGi7fwVA/mcp

Connecting PagerDuty Events to Z.ai

About a minute, in ZCode settings

1Open Settings, MCP Servers, then click New MCP Server in the upper-right corner.
2Choose the User scope, name it, and keep the type as HTTP. Paste your PagerDuty Events link as the service URL. The link above is the URL.
3Click Add and confirm the server is enabled in the list, then ask something real. PagerDuty Events is now part of Z.ai.

Configuration · claude_desktop_config.jsonCopy

{
  "mcpServers": {
    "pagerduty-incident-trigger-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_kKI8TivX0k47Sbfm98eG7QAfs3djX089vGi7fwVA/mcp"
    }
  }
}

Z.ai + PagerDuty Events

One chat. Your PagerDuty Events, live inside Z.ai.

Real prompts, answered with live data. This is the kind of session you will have in Z.ai once the server is in.

Waiting for input…

Works with modern AI clients that support MCP, including ChatGPT, Claude, Cursor, and more.

These prompts ship with the PagerDuty Events Connector. Once yours is connected, they work in your sessions.

The full capability set, the prompts and the observed latency live on the PagerDuty Events Connector page.

Mission Control

See everything your Z.ai agents do in PagerDuty Events.

When Z.ai runs a tool in PagerDuty Events, it happens on Z.ai's side: you see the result, but not the request itself, what data it carried, or whether a rule was broken.

Now every move lands on your screen.

Every execution is recorded, enforced, and shown to you: what ran, what it returned, what was blocked, and why.

AI Briefing

Upgrade to unlock

Know exactly what needs your attention before you even look at the charts. One briefing. The full picture. The next move.

Requests

Total in this period

Avg Latency

API 88ms · Overhead 54ms

Vinkius Reliability

Agent 280 · Upstream 47 · Vinkius 15

Tokens

AI tokens processed

DLP Protected

Sensitive data redacted

Cost Saved

FinOps truncations applied

AI Agents Activities

last 30 days

30d agotoday

Request Volume & Latency

requests latency

Every request your Z.ai agents make through PagerDuty Events is logged, enforced and auditable. See how AI Governance turns agent activity into accountability, and what it means for your PagerDuty Events workflows.

What sets us apart

It's not just the Connector that stays safe. Everything your agents do through it is.

Connecting PagerDuty Events to your AI is step one. But an open line between your agents and PagerDuty Events is only half the story: without protection, every action they take runs unguarded.

That's why protection doesn't stop at the door.

Every action your agents take through the Connector runs inside our infrastructure: signed activity logs, automatic key rotation, spending limits that pause instead of surprise, and a sandbox that isolates every execution.

Tamper Proof Activity Log

Every request your agents make in PagerDuty Events is recorded and signed, so any change to the history becomes detectable.

Automatic Key Rotation

We rotate security keys every 24 hours. Your PagerDuty Events connection stays protected without any manual work.

Spending Protection

We enforce the spending limit you choose and pause actions that exceed it until approval is received. Your PagerDuty Events actions never surprise you.

Isolated Sandbox

Every execution through PagerDuty Events runs isolated, with 34+ security rules covering memory, CPU, network access, file handling and execution.

Security Event Streaming

Security events flow to Splunk, Datadog or your own webhook, so PagerDuty Events activity lands in the tools you already rely on.

Instant Resume

Idle connections resume in 3 to 5 ms while preserving their state, keeping your Z.ai sessions responsive.

Malicious File Protection

We detect compressed files designed to exhaust system resources and block them before they ever reach PagerDuty Events.

Credential Validation

We test your PagerDuty Events credentials before saving them. Invalid credentials are rejected instead of being stored.

Separate Usage Limits

Usage stays isolated per account, so activity in one connection never consumes another account's allowance.

One Connector, one link, and the whole operation is protected. Not just the connection: everything your agents do through it.

These guarantees are not add-ons: they are the infrastructure every PagerDuty Events connection runs on. Read how our infrastructure protects everything your Z.ai agents do, end to end.

Inside Vinkius

Get PagerDuty Events ready for your AI. It's easy.

You choose PagerDuty Events from the Vinkius Catalog, sign in to your PagerDuty Events account, and get one connection link. That's it.

You choose PagerDuty Events
You find PagerDuty Events in the Catalog and install the Connector with one click.
PagerDuty Events
Active
Enable Connector
Activating…
You sign in
You connect your PagerDuty Events account and choose what you want your AI to access. Your credentials stay encrypted and separate from your AI.
Configure Credentials
Configure credentials for {{connectorName}}
PagerDuty Events sign-inRequiredEncrypted
Save & Continue
Encrypted Storage
Your credentials are encrypted at rest and in transit.
Never Shared
Your credentials are never shared with third parties.
Full Control
Revoke or update credentials at any time.
You add the link in Z.ai
Vinkius gives you one connection link. In ZCode, you add an HTTP MCP server in Settings with the link as the service URL, and the connection is ready.
Token generated successfully
MCP Connection URL
https://edge.vinkius.com/vk_preview_kKI8TivX0k47Sbfm98eG7QAfs3djX089vGi7fwVA/mcp
Connection Token
vk_live_••••••••
Go to Dashboard

Set it up once. Use PagerDuty Events with the AI you already use.

FAQ

Z.ai access questions.

01
Does this work across my workspaces?
Yes. Choose the User scope when adding the server and it's available in every workspace; Workspace scope keeps it in the current project only.
02
If I connect PagerDuty Events to Gemini, can I use the same connection in Claude or ChatGPT later?
Yes, and that's the point: the connection is yours, not Gemini's. You paste the same link in any AI you use, and there's nothing new to set up or pay again. Connect a new AI and PagerDuty Events is already there.
03
What does ZCode need to connect to PagerDuty Events?
Just the link. The hosted Connector handles access on our side, so you don't configure headers or tokens in ZCode. For remote services, the type is HTTP and the URL is your link.
04
What can I actually ask Gemini to do with PagerDuty Events?
Whatever the Connector covers: check data, run actions and bring answers back. The Connector page lists every capability your AI gains, with real examples you can copy.
05
Gemini doesn't show the Connector. What do I check?
Open Settings, MCP Servers and check the server is enabled, confirm the URL was pasted exactly as copied, and confirm the Connector is active in your Vinkius account. A deactivated Connector stops responding.
06
Can I remove the access later?
Remove the server in Settings, MCP Servers and it's out of your work. Your Vinkius account keeps the connection and its history either way, ready for the next AI.
More questions about PagerDuty Events? The Connector page answers them. See everything the PagerDuty Events Connector can do

About the Connector

What PagerDuty Events adds to your AI.

Once you connect it, your AI can take real actions in PagerDuty Events when you ask. The Connector page lists every capability in detail, alongside the latency we measure in production and prompts worth trying first.

See everything the PagerDuty Events Connector can do