
Step by step, for each client
Connecting Preparedness Training Planner in each client
The same hosted link plugs into every client below. Pick the one you use — each setup takes seconds — and start a new chat.

Claude
Preparedness Training Planner Connector
You're all set. Choose your MCP client and follow the setup instructions.
https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcpConnecting Preparedness Training Planner to Claude
About a minute, right in your Claude settings
- 1In Claude, open Customize and choose Connectors (claude.ai or the desktop app).
- 2Click +, choose Add custom connector, and paste your Preparedness Training Planner link as the remote MCP server URL.
- 3Click Add and start a new chat. Ask for something real: Preparedness Training Planner is now part of your Claude.
{
"mcpServers": {
"preparedness-training-planner-mcp": {
"url": "https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcp"
}
}
}
ChatGPT
Preparedness Training Planner Connector
You're all set. Choose your MCP client and follow the setup instructions.
https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcpConnecting Preparedness Training Planner to ChatGPT
About a minute, right in your ChatGPT settings
- 1In ChatGPT, open Settings, choose Apps & Connectors, and turn on Developer mode under Advanced settings.
- 2Click Create, name it, and paste your Preparedness Training Planner link as the MCP server URL. Choose No authentication and check “I trust this application”.
- 3Create it, start a new chat, and switch the connector on via the + menu. Ask for something real: Preparedness Training Planner is now part of your ChatGPT.
{
"mcpServers": {
"preparedness-training-planner-mcp": {
"url": "https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcp"
}
}
}
Gemini
Preparedness Training Planner Connector
You're all set. Choose your MCP client and follow the setup instructions.
https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcpConnecting Preparedness Training Planner to Gemini
About a minute, right in your terminal
- 1Open the Gemini CLI in your terminal.
- 2Run: gemini mcp add --transport http Preparedness Training Planner <your link>. Your Preparedness Training Planner link above is the HTTP URL.
- 3Run /mcp and confirm the status shows CONNECTED. Preparedness Training Planner is now part of your Gemini.
{
"mcpServers": {
"preparedness-training-planner-mcp": {
"url": "https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcp"
}
}
}
Perplexity
Preparedness Training Planner Connector
You're all set. Choose your MCP client and follow the setup instructions.
https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcpConnecting Preparedness Training Planner to Perplexity
A few minutes, in the Perplexity Mac app
- 1In the Perplexity Mac app, open Account, choose Connectors, and click Add Connector.
- 2In the Simple tab, choose MCP Connector, name it, and add the bridge command with your Preparedness Training Planner link: npx mcp-remote <your link>. The link above is the URL.
- 3Click Save and check it shows Running, then turn the connector on under Sources on the homepage. Preparedness Training Planner is now part of your Perplexity.
{
"mcpServers": {
"preparedness-training-planner-mcp": {
"url": "https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcp"
}
}
}
Grok
Preparedness Training Planner Connector
You're all set. Choose your MCP client and follow the setup instructions.
https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcpConnecting Preparedness Training Planner to Grok
About a minute, at grok.com/connectors
- 1In Grok, open grok.com/connectors and click New Connector.
- 2Choose Custom, name it, and paste your Preparedness Training Planner link as the remote MCP server URL.
- 3Save and enable it, finish the browser authorization if prompted, and ask Grok something real. Preparedness Training Planner is now part of your Grok.
{
"mcpServers": {
"preparedness-training-planner-mcp": {
"url": "https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcp"
}
}
}
Microsoft Copilot
Preparedness Training Planner Connector
You're all set. Choose your MCP client and follow the setup instructions.
https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcpConnecting Preparedness Training Planner to Copilot
About a minute, in VS Code's Copilot Chat
- 1In VS Code, open the Copilot Chat panel, click the tools icon and select the + icon, or run MCP: Add Server from the Command Palette.
- 2Choose your scope, name the server, and paste your Preparedness Training Planner link as the server URL with HTTP transport.
- 3Confirm the server appears in your MCP list, then ask Copilot something real. Preparedness Training Planner is now part of your Copilot.
{
"mcpServers": {
"preparedness-training-planner-mcp": {
"url": "https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcp"
}
}
}
Cursor
Preparedness Training Planner Connector
You're all set. Choose your MCP client and follow the setup instructions.
https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcpConnecting Preparedness Training Planner to Cursor
About a minute, in Cursor
- 1Open Customize in the Cursor sidebar (or create .cursor/mcp.json in your project).
- 2Add an MCP server named Preparedness Training Planner with the url field set to your link. The link above is the URL.
- 3Save, enable the server, and ask something real. Preparedness Training Planner is now part of Cursor.
{
"mcpServers": {
"preparedness-training-planner-mcp": {
"url": "https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcp"
}
}
}
VS Code
Preparedness Training Planner Connector
You're all set. Choose your MCP client and follow the setup instructions.
https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcpConnecting Preparedness Training Planner to VS Code
About a minute, in VS Code
- 1Run MCP: Add Server from the Command Palette (or create .vscode/mcp.json in your project).
- 2Add a server named Preparedness Training Planner with type http and your link as the url. The link above is the URL.
- 3Save and ask something real in Copilot Chat. Preparedness Training Planner is now part of VS Code.
{
"mcpServers": {
"preparedness-training-planner-mcp": {
"url": "https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcp"
}
}
}
Windsurf
Preparedness Training Planner Connector
You're all set. Choose your MCP client and follow the setup instructions.
https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcpConnecting Preparedness Training Planner to Windsurf
About a minute, in Cascade
- 1In Cascade, click the MCPs icon (or go to Settings, Cascade, MCP Servers).
- 2Edit mcp_config.json and add Preparedness Training Planner with the serverUrl field set to your link. The link above is the URL.
- 3Save and ask something real. Preparedness Training Planner is now part of Windsurf.
{
"mcpServers": {
"preparedness-training-planner-mcp": {
"url": "https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcp"
}
}
}
JetBrains
Preparedness Training Planner Connector
You're all set. Choose your MCP client and follow the setup instructions.
https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcpConnecting Preparedness Training Planner to JetBrains
About a minute, in Settings
- 1Go to Settings, Tools, AI Assistant, Model Context Protocol (MCP).
- 2Click Add and add Preparedness Training Planner with the url field set to your link. The link above is the URL.
- 3Click OK and Apply, check the Status column, and ask something real. Preparedness Training Planner is now part of your IDE.
{
"mcpServers": {
"preparedness-training-planner-mcp": {
"url": "https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcp"
}
}
}
Cline
Preparedness Training Planner Connector
You're all set. Choose your MCP client and follow the setup instructions.
https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcpConnecting Preparedness Training Planner to Cline
About a minute, in the Cline panel
- 1In the Cline panel, click the MCP Servers icon and open the Remote Servers tab.
- 2Add a server named Preparedness Training Planner with your link as the Server URL and Streamable HTTP as the transport. The link above is the URL.
- 3Click Add Server and ask something real. Preparedness Training Planner is now part of Cline.
{
"mcpServers": {
"preparedness-training-planner-mcp": {
"url": "https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcp"
}
}
}
LangChain
Preparedness Training Planner Connector
You're all set. Choose your MCP client and follow the setup instructions.
https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcpConnecting Preparedness Training Planner to LangChain
About a minute, in your code
- 1Install LangChain with the mcp extra: pip install "langchain[mcp]".
- 2Create an MCPAdapter with your Preparedness Training Planner link: MCPAdapter("<your link>"). The link above is the URL.
- 3Call list_tools and pass the tools to your agent. Preparedness Training Planner is now part of your LangChain agent.
{
"mcpServers": {
"preparedness-training-planner-mcp": {
"url": "https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcp"
}
}
}
Vercel AI SDK
Preparedness Training Planner Connector
You're all set. Choose your MCP client and follow the setup instructions.
https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcpConnecting Preparedness Training Planner to the Vercel AI SDK
About a minute, in your code
- 1Install the MCP client: npm install @ai-sdk/mcp, and import createMCPClient from '@ai-sdk/mcp'.
- 2Create the client with your Preparedness Training Planner link as the transport: { type: 'http', url: '<your link>' }. The link above is the URL.
- 3Call client.tools() and pass the tools to streamText. Preparedness Training Planner is now part of your AI SDK app.
{
"mcpServers": {
"preparedness-training-planner-mcp": {
"url": "https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcp"
}
}
}
Lovable
Preparedness Training Planner Connector
You're all set. Choose your MCP client and follow the setup instructions.
https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcpConnecting Preparedness Training Planner to Lovable
About a minute, in the Connectors catalog
- 1Open Connectors, select the + button in the top right of the catalog, and choose MCP server.
- 2Name the server and paste your Preparedness Training Planner link as the Server URL. The link above is the URL.
- 3Choose No authentication and click Add server, then ask Lovable something real. Preparedness Training Planner is now part of Lovable.
{
"mcpServers": {
"preparedness-training-planner-mcp": {
"url": "https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcp"
}
}
}
Z.ai
Preparedness Training Planner Connector
You're all set. Choose your MCP client and follow the setup instructions.
https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcpConnecting Preparedness Training Planner to Z.ai
About a minute, in ZCode settings
- 1Open Settings, MCP Servers, then click New MCP Server in the upper-right corner.
- 2Choose the User scope, name it, and keep the type as HTTP. Paste your Preparedness Training Planner link as the service URL. The link above is the URL.
- 3Click Add and confirm the server is enabled in the list, then ask something real. Preparedness Training Planner is now part of Z.ai.
{
"mcpServers": {
"preparedness-training-planner-mcp": {
"url": "https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcp"
}
}
}
Raycast
Preparedness Training Planner Connector
You're all set. Choose your MCP client and follow the setup instructions.
https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcpConnecting Preparedness Training Planner to Raycast
A few minutes, in Raycast Pro
- 1Search for the Install MCP Server command (or open Manage MCP Servers and choose Install New Server).
- 2Give the server a name and icon, select HTTP as the transport, and paste your Preparedness Training Planner link as the URL. The link above is the URL.
- 3Press Install MCP Server and confirm the status shows Running, then ask something real. Preparedness Training Planner is now part of Raycast.
{
"mcpServers": {
"preparedness-training-planner-mcp": {
"url": "https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcp"
}
}
}
Qwen Code
Preparedness Training Planner Connector
You're all set. Choose your MCP client and follow the setup instructions.
https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcpConnecting Preparedness Training Planner to Qwen Code
About a minute, in your terminal
- 1Run: qwen mcp add --transport http Preparedness Training Planner <your link>. The link above is the URL.
- 2Prefer a config file? Add it to ~/.qwen/settings.json (user) or .qwen/settings.json (project) with the httpUrl field. The link above is the URL.
- 3Enter /mcp in the chat to confirm the server appears. Preparedness Training Planner is now part of Qwen Code.
{
"mcpServers": {
"preparedness-training-planner-mcp": {
"url": "https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcp"
}
}
}
Kimi Code
Preparedness Training Planner Connector
You're all set. Choose your MCP client and follow the setup instructions.
https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcpConnecting Preparedness Training Planner to Kimi Code
About a minute, in the TUI
- 1Run /mcp-config in the Kimi Code TUI to add a server interactively (or edit mcp.json directly).
- 2Add a server named Preparedness Training Planner with your link in the url field. The link above is the URL.
- 3Run /mcp to confirm the status, then ask something real. Preparedness Training Planner is now part of Kimi Code.
{
"mcpServers": {
"preparedness-training-planner-mcp": {
"url": "https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcp"
}
}
}
Le Chat
Preparedness Training Planner Connector
You're all set. Choose your MCP client and follow the setup instructions.
https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcpConnecting Preparedness Training Planner to Le Chat
About a minute, in Connectors
- 1In Le Chat, open Connectors and choose to add a custom connector.
- 2Paste your Preparedness Training Planner link as the remote MCP server URL. The link above is the URL.
- 3Save and authorize, then ask something real. Preparedness Training Planner is now part of Le Chat.
{
"mcpServers": {
"preparedness-training-planner-mcp": {
"url": "https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcp"
}
}
}Claude and other AIs + Preparedness Training Planner
One chat. Your Preparedness Training Planner, live inside Claude and other AIs.
Real prompts, answered with live data. This is the kind of conversation you will have in Claude and other AIs once the link is in.
Waiting for input…
Works with modern AI clients that support MCP, including ChatGPT, Claude, Cursor, and more.
These prompts ship with the Preparedness Training Planner Connector. Once yours is connected, they work in your chats.
The full capability set, the prompts and the observed latency live on the Preparedness Training Planner Connector page.
Mission Control
See everything your agents do in Preparedness Training Planner.
When your agents run a tool in Preparedness Training Planner, it happens on the client side: you see the answer in the chat, but not the request itself, what data it carried, or whether a rule was broken.
Now every move lands on your screen.
Every execution is recorded, enforced, and shown to you: what ran, what it returned, what was blocked, and why.
Know exactly what needs your attention before you even look at the charts. One briefing. The full picture. The next move.
AI Agents Activities
last 30 daysRequest Volume & Latency
requests latencyEvery request your agents make through Preparedness Training Planner is logged, enforced and auditable. See how AI Governance turns agent activity into accountability, and what it means for your Preparedness Training Planner workflows.
What sets us apart
It's not just the Connector that stays safe. Everything your agents do through it is.
Connecting Preparedness Training Planner to your AI is step one. But an open line between your agents and Preparedness Training Planner is only half the story: without protection, every action they take runs unguarded.
That's why protection doesn't stop at the door.
Every action your agents take through the Connector runs inside our infrastructure: signed activity logs, automatic key rotation, spending limits that pause instead of surprise, and a sandbox that isolates every execution.
Tamper Proof Activity Log
Every request your agents make in Preparedness Training Planner is recorded and signed, so any change to the history becomes detectable.
Automatic Key Rotation
We rotate security keys every 24 hours. Your Preparedness Training Planner connection stays protected without any manual work.
Spending Protection
We enforce the spending limit you choose and pause actions that exceed it until approval is received. Your Preparedness Training Planner actions never surprise you.
Isolated Sandbox
Every execution through Preparedness Training Planner runs isolated, with 34+ security rules covering memory, CPU, network access, file handling and execution.
Security Event Streaming
Security events flow to Splunk, Datadog or your own webhook, so Preparedness Training Planner activity lands in the tools you already rely on.
Instant Resume
Idle connections resume in 3 to 5 ms while preserving their state, keeping your conversations responsive across every client.
Malicious File Protection
We detect compressed files designed to exhaust system resources and block them before they ever reach Preparedness Training Planner.
Credential Validation
We test your Preparedness Training Planner credentials before saving them. Invalid credentials are rejected instead of being stored.
Separate Usage Limits
Usage stays isolated per account, so activity in one connection never consumes another account's allowance.
One Connector, one link, and the whole operation is protected. Not just the connection: everything your agents do through it.
These guarantees are not add-ons: they are the infrastructure every Preparedness Training Planner connection runs on. Read how our infrastructure protects everything your agents do, end to end.
Inside Vinkius
Get Preparedness Training Planner ready for your AI. It's easy.
You choose Preparedness Training Planner from the Vinkius Catalog and get one connection link. That's it.
You choose Preparedness Training Planner
You find Preparedness Training Planner in the Catalog and install the Connector with one click.
Preparedness Training Planner
Active
Enable ConnectorActivating…You add the link in your AI client
Vinkius gives you one connection link. Add it to the client you use — the exact steps for each client are in the section above — and Preparedness Training Planner is live everywhere in one move.
Token generated successfully
MCP Connection URL
https://edge.vinkius.com/vk_preview_qL7g7e8ovVzQDPxZOcgz5WtiNjP8RWH5zeCwlT1i/mcpGo to DashboardConnection Token
vk_live_••••••••
Set it up once. Use Preparedness Training Planner with the AI you already use.
FAQ
Claude access questions.
- 01
Does this work on claude.ai and in the Claude desktop app?
Yes. You add the same link under Customize and Connectors in both, and your chats work the same in each.
- 02
If I connect Preparedness Training Planner to Claude, can I use the same connection in ChatGPT or Gemini later?
Yes, and that's the point: the connection is yours, not Claude's. You paste the same link in any AI you use, and there's nothing new to set up or pay again. Connect a new AI and Preparedness Training Planner is already there.
- 03
Do I need to hand my Preparedness Training Planner password to Claude?
Never. You sign in once at Vinkius, and we keep your logins encrypted and away from your AI. Claude only ever sees the link, and you can remove it whenever you want.
- 04
What can I actually ask Claude to do with Preparedness Training Planner?
Whatever the Connector covers: check data, run actions and bring answers back into the chat. The Connector page lists every capability your AI gains, with real examples you can copy.
- 05
Claude doesn't show the Connector. What do I check?
Make sure the link was pasted exactly as copied and that the Connector is active in your Vinkius account, then reopen the connectors list in Claude. A deactivated Connector stops appearing in new chats.
- 06
Can I remove the access later?
Anytime. Remove the connector under Customize and Connectors in Claude and it's out of your chats. Your Vinkius account keeps the connection and its history either way, ready for the next AI.
More questions about Preparedness Training Planner? The Connector page answers them. See everything the Preparedness Training Planner Connector can do
About the Connector
What Preparedness Training Planner adds to your AI.
Once you connect it, your AI gains 4 capabilities: the exact actions it can take in Preparedness Training Planner when you ask. The Connector page lists every one of them in detail, alongside the latency we measure in production and prompts worth trying first.
See everything the Preparedness Training Planner Connector can do