Does this work in the Gemini web and mobile apps?

Not yet. The Gemini apps use built-in Connected Apps that you toggle on and off, and they don't accept custom Connector links today. The supported path is the free Gemini CLI, where the same link runs Property Loss Recovery in your terminal.

If I connect Property Loss Recovery to Gemini, can I use the same connection in Claude or ChatGPT later?

Yes, and that's the point: the connection is yours, not Gemini's. You paste the same link in any AI you use, and there's nothing new to set up or pay again. Connect a new AI and Property Loss Recovery is already there.

Do I need to hand my Property Loss Recovery password to Gemini?

Never. You sign in once at Vinkius, and we keep your logins encrypted and away from your AI. Gemini only ever sees the link, and you can remove it whenever you want.

What can I actually ask Gemini to do with Property Loss Recovery?

Whatever the Connector covers: check data, run actions and bring answers back. The Connector page lists every capability your AI gains, with real examples you can copy.

Gemini doesn't show the Connector. What do I check?

Run gemini mcp list and check that the status shows CONNECTED, confirm the Connector is active in your Vinkius account, then run the add command again if needed. A deactivated Connector stops responding.

Can I remove the access later?

Anytime. Run gemini mcp remove and it's out of your terminal. Your Vinkius account keeps the connection and its history either way, ready for the next AI.

How to give Gemini access to Property Loss Recovery

Set up in seconds, once. From then on, Gemini gets things done for you: run one command, and the Gemini CLI uses Property Loss Recovery live in your terminal.

Ask AI about this guide

Property Loss Recovery Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_EGbYCXbj6qbYT684UjOLIAP0ZjqJLpLD1ilxnWYG/mcp

Connecting Property Loss Recovery to Gemini

About a minute, right in your terminal

1Open the Gemini CLI in your terminal.
2Run: gemini mcp add --transport http Property Loss Recovery <your link>. Your Property Loss Recovery link above is the HTTP URL.
3Run /mcp and confirm the status shows CONNECTED. Property Loss Recovery is now part of your Gemini.

Configuration · claude_desktop_config.jsonCopy

{
  "mcpServers": {
    "property-loss-recovery-planner-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_EGbYCXbj6qbYT684UjOLIAP0ZjqJLpLD1ilxnWYG/mcp"
    }
  }
}

Gemini + Property Loss Recovery

One chat. Your Property Loss Recovery, live inside Gemini.

Real prompts, answered with live data. This is the kind of conversation you will have in the Gemini CLI once the link is in.

Waiting for input…

Works with modern AI clients that support MCP, including ChatGPT, Claude, Cursor, and more.

These prompts ship with the Property Loss Recovery Connector. Once yours is connected, they work in your sessions.

The full capability set, the prompts and the observed latency live on the Property Loss Recovery Connector page.

Mission Control

See everything your Gemini agents do in Property Loss Recovery.

When Gemini runs a tool in Property Loss Recovery, it happens in the terminal: you see the result, but not the request itself, what data it carried, or whether a rule was broken.

Now every move lands on your screen.

Every execution is recorded, enforced, and shown to you: what ran, what it returned, what was blocked, and why.

AI Briefing

Upgrade to unlock

Know exactly what needs your attention before you even look at the charts. One briefing. The full picture. The next move.

Requests

Total in this period

Avg Latency

API 88ms · Overhead 54ms

Vinkius Reliability

Agent 280 · Upstream 47 · Vinkius 15

Tokens

AI tokens processed

DLP Protected

Sensitive data redacted

Cost Saved

FinOps truncations applied

AI Agents Activities

last 30 days

30d agotoday

Request Volume & Latency

requests latency

Every request your Gemini agents make through Property Loss Recovery is logged, enforced and auditable. See how AI Governance turns agent activity into accountability, and what it means for your Property Loss Recovery workflows.

What sets us apart

It's not just the Connector that stays safe. Everything your agents do through it is.

Connecting Property Loss Recovery to your AI is step one. But an open line between your agents and Property Loss Recovery is only half the story: without protection, every action they take runs unguarded.

That's why protection doesn't stop at the door.

Every action your agents take through the Connector runs inside our infrastructure: signed activity logs, automatic key rotation, spending limits that pause instead of surprise, and a sandbox that isolates every execution.

Tamper Proof Activity Log

Every request your agents make in Property Loss Recovery is recorded and signed, so any change to the history becomes detectable.

Automatic Key Rotation

We rotate security keys every 24 hours. Your Property Loss Recovery connection stays protected without any manual work.

Spending Protection

We enforce the spending limit you choose and pause actions that exceed it until approval is received. Your Property Loss Recovery actions never surprise you.

Isolated Sandbox

Every execution through Property Loss Recovery runs isolated, with 34+ security rules covering memory, CPU, network access, file handling and execution.

Security Event Streaming

Security events flow to Splunk, Datadog or your own webhook, so Property Loss Recovery activity lands in the tools you already rely on.

Instant Resume

Idle connections resume in 3 to 5 ms while preserving their state, keeping your Gemini sessions responsive.

Malicious File Protection

We detect compressed files designed to exhaust system resources and block them before they ever reach Property Loss Recovery.

Credential Validation

We test your Property Loss Recovery credentials before saving them. Invalid credentials are rejected instead of being stored.

Separate Usage Limits

Usage stays isolated per account, so activity in one connection never consumes another account's allowance.

One Connector, one link, and the whole operation is protected. Not just the connection: everything your agents do through it.

These guarantees are not add-ons: they are the infrastructure every Property Loss Recovery connection runs on. Read how our infrastructure protects everything your Gemini agents do, end to end.

Inside Vinkius

Get Property Loss Recovery ready for your AI. It's easy.

You choose Property Loss Recovery from the Vinkius Catalog and get one connection link. That's it.

You choose Property Loss Recovery
You find Property Loss Recovery in the Catalog and install the Connector with one click.
Property Loss Recovery
Active
Enable Connector
Activating…
You add the link in the Gemini CLI
Vinkius gives you one connection link. In the Gemini CLI, you run one gemini mcp add command with the link as the HTTP URL, and the connection is ready.
Token generated successfully
MCP Connection URL
https://edge.vinkius.com/vk_preview_EGbYCXbj6qbYT684UjOLIAP0ZjqJLpLD1ilxnWYG/mcp
Connection Token
vk_live_••••••••
Go to Dashboard

Set it up once. Use Property Loss Recovery with the AI you already use.

FAQ

Gemini access questions.

01
Does this work in the Gemini web and mobile apps?
Not yet. The Gemini apps use built-in Connected Apps that you toggle on and off, and they don't accept custom Connector links today. The supported path is the free Gemini CLI, where the same link runs Property Loss Recovery in your terminal.
02
If I connect Property Loss Recovery to Gemini, can I use the same connection in Claude or ChatGPT later?
Yes, and that's the point: the connection is yours, not Gemini's. You paste the same link in any AI you use, and there's nothing new to set up or pay again. Connect a new AI and Property Loss Recovery is already there.
03
Do I need to hand my Property Loss Recovery password to Gemini?
Never. You sign in once at Vinkius, and we keep your logins encrypted and away from your AI. Gemini only ever sees the link, and you can remove it whenever you want.
04
What can I actually ask Gemini to do with Property Loss Recovery?
Whatever the Connector covers: check data, run actions and bring answers back. The Connector page lists every capability your AI gains, with real examples you can copy.
05
Gemini doesn't show the Connector. What do I check?
Run gemini mcp list and check that the status shows CONNECTED, confirm the Connector is active in your Vinkius account, then run the add command again if needed. A deactivated Connector stops responding.
06
Can I remove the access later?
Anytime. Run gemini mcp remove and it's out of your terminal. Your Vinkius account keeps the connection and its history either way, ready for the next AI.
More questions about Property Loss Recovery? The Connector page answers them. See everything the Property Loss Recovery Connector can do

About the Connector

What Property Loss Recovery adds to your AI.

Once you connect it, your AI gains 4 capabilities: the exact actions it can take in Property Loss Recovery when you ask. The Connector page lists every one of them in detail, alongside the latency we measure in production and prompts worth trying first.

See everything the Property Loss Recovery Connector can do