Does this work in the Gemini web and mobile apps?

Not yet. The Gemini apps use built-in Connected Apps that you toggle on and off, and they don't accept custom Connector links today. The supported path is the free Gemini CLI, where the same link runs Stope Design Optimization in your terminal.

If I connect Stope Design Optimization to Gemini, can I use the same connection in Claude or ChatGPT later?

Yes, and that's the point: the connection is yours, not Gemini's. You paste the same link in any AI you use, and there's nothing new to set up or pay again. Connect a new AI and Stope Design Optimization is already there.

Do I need to hand my Stope Design Optimization password to Gemini?

Never. You sign in once at Vinkius, and we keep your logins encrypted and away from your AI. Gemini only ever sees the link, and you can remove it whenever you want.

What can I actually ask Gemini to do with Stope Design Optimization?

Whatever the Connector covers: check data, run actions and bring answers back. The Connector page lists every capability your AI gains, with real examples you can copy.

Gemini doesn't show the Connector. What do I check?

Run gemini mcp list and check that the status shows CONNECTED, confirm the Connector is active in your Vinkius account, then run the add command again if needed. A deactivated Connector stops responding.

Can I remove the access later?

Anytime. Run gemini mcp remove and it's out of your terminal. Your Vinkius account keeps the connection and its history either way, ready for the next AI.

How to give Gemini access to Stope Design Optimization

Set up in seconds, once. From then on, Gemini gets things done for you: run one command, and the Gemini CLI uses Stope Design Optimization live in your terminal.

Ask AI about this guide

Stope Design Optimization Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_9ddLoRhA580YtfWVd9jNXzZnrtqTJhlLOnXA2gPC/mcp

Connecting Stope Design Optimization to Gemini

About a minute, right in your terminal

1Open the Gemini CLI in your terminal.
2Run: gemini mcp add --transport http Stope Design Optimization <your link>. Your Stope Design Optimization link above is the HTTP URL.
3Run /mcp and confirm the status shows CONNECTED. Stope Design Optimization is now part of your Gemini.

Configuration · claude_desktop_config.jsonCopy

{
  "mcpServers": {
    "stope-design-optimization-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_9ddLoRhA580YtfWVd9jNXzZnrtqTJhlLOnXA2gPC/mcp"
    }
  }
}

Gemini + Stope Design Optimization

One chat. Your Stope Design Optimization, live inside Gemini.

Real prompts, answered with live data. This is the kind of conversation you will have in the Gemini CLI once the link is in.

Waiting for input…

Works with modern AI clients that support MCP, including ChatGPT, Claude, Cursor, and more.

These prompts ship with the Stope Design Optimization Connector. Once yours is connected, they work in your sessions.

The full capability set, the prompts and the observed latency live on the Stope Design Optimization Connector page.

Mission Control

See everything your Gemini agents do in Stope Design Optimization.

When Gemini runs a tool in Stope Design Optimization, it happens in the terminal: you see the result, but not the request itself, what data it carried, or whether a rule was broken.

Now every move lands on your screen.

Every execution is recorded, enforced, and shown to you: what ran, what it returned, what was blocked, and why.

AI Briefing

Upgrade to unlock

Know exactly what needs your attention before you even look at the charts. One briefing. The full picture. The next move.

Requests

Total in this period

Avg Latency

API 88ms · Overhead 54ms

Vinkius Reliability

Agent 280 · Upstream 47 · Vinkius 15

Tokens

AI tokens processed

DLP Protected

Sensitive data redacted

Cost Saved

FinOps truncations applied

AI Agents Activities

last 30 days

30d agotoday

Request Volume & Latency

requests latency

Every request your Gemini agents make through Stope Design Optimization is logged, enforced and auditable. See how AI Governance turns agent activity into accountability, and what it means for your Stope Design Optimization workflows.

What sets us apart

It's not just the Connector that stays safe. Everything your agents do through it is.

Connecting Stope Design Optimization to your AI is step one. But an open line between your agents and Stope Design Optimization is only half the story: without protection, every action they take runs unguarded.

That's why protection doesn't stop at the door.

Every action your agents take through the Connector runs inside our infrastructure: signed activity logs, automatic key rotation, spending limits that pause instead of surprise, and a sandbox that isolates every execution.

Tamper Proof Activity Log

Every request your agents make in Stope Design Optimization is recorded and signed, so any change to the history becomes detectable.

Automatic Key Rotation

We rotate security keys every 24 hours. Your Stope Design Optimization connection stays protected without any manual work.

Spending Protection

We enforce the spending limit you choose and pause actions that exceed it until approval is received. Your Stope Design Optimization actions never surprise you.

Isolated Sandbox

Every execution through Stope Design Optimization runs isolated, with 34+ security rules covering memory, CPU, network access, file handling and execution.

Security Event Streaming

Security events flow to Splunk, Datadog or your own webhook, so Stope Design Optimization activity lands in the tools you already rely on.

Instant Resume

Idle connections resume in 3 to 5 ms while preserving their state, keeping your Gemini sessions responsive.

Malicious File Protection

We detect compressed files designed to exhaust system resources and block them before they ever reach Stope Design Optimization.

Credential Validation

We test your Stope Design Optimization credentials before saving them. Invalid credentials are rejected instead of being stored.

Separate Usage Limits

Usage stays isolated per account, so activity in one connection never consumes another account's allowance.

One Connector, one link, and the whole operation is protected. Not just the connection: everything your agents do through it.

These guarantees are not add-ons: they are the infrastructure every Stope Design Optimization connection runs on. Read how our infrastructure protects everything your Gemini agents do, end to end.

Inside Vinkius

Get Stope Design Optimization ready for your AI. It's easy.

You choose Stope Design Optimization from the Vinkius Catalog and get one connection link. That's it.

You choose Stope Design Optimization
You find Stope Design Optimization in the Catalog and install the Connector with one click.
Stope Design Optimization
Active
Enable Connector
Activating…
You add the link in the Gemini CLI
Vinkius gives you one connection link. In the Gemini CLI, you run one gemini mcp add command with the link as the HTTP URL, and the connection is ready.
Token generated successfully
MCP Connection URL
https://edge.vinkius.com/vk_preview_9ddLoRhA580YtfWVd9jNXzZnrtqTJhlLOnXA2gPC/mcp
Connection Token
vk_live_••••••••
Go to Dashboard

Set it up once. Use Stope Design Optimization with the AI you already use.

FAQ

Gemini access questions.

01
Does this work in the Gemini web and mobile apps?
Not yet. The Gemini apps use built-in Connected Apps that you toggle on and off, and they don't accept custom Connector links today. The supported path is the free Gemini CLI, where the same link runs Stope Design Optimization in your terminal.
02
If I connect Stope Design Optimization to Gemini, can I use the same connection in Claude or ChatGPT later?
Yes, and that's the point: the connection is yours, not Gemini's. You paste the same link in any AI you use, and there's nothing new to set up or pay again. Connect a new AI and Stope Design Optimization is already there.
03
Do I need to hand my Stope Design Optimization password to Gemini?
Never. You sign in once at Vinkius, and we keep your logins encrypted and away from your AI. Gemini only ever sees the link, and you can remove it whenever you want.
04
What can I actually ask Gemini to do with Stope Design Optimization?
Whatever the Connector covers: check data, run actions and bring answers back. The Connector page lists every capability your AI gains, with real examples you can copy.
05
Gemini doesn't show the Connector. What do I check?
Run gemini mcp list and check that the status shows CONNECTED, confirm the Connector is active in your Vinkius account, then run the add command again if needed. A deactivated Connector stops responding.
06
Can I remove the access later?
Anytime. Run gemini mcp remove and it's out of your terminal. Your Vinkius account keeps the connection and its history either way, ready for the next AI.
More questions about Stope Design Optimization? The Connector page answers them. See everything the Stope Design Optimization Connector can do

About the Connector

What Stope Design Optimization adds to your AI.

Once you connect it, your AI gains 4 capabilities: the exact actions it can take in Stope Design Optimization when you ask. The Connector page lists every one of them in detail, alongside the latency we measure in production and prompts worth trying first.

See everything the Stope Design Optimization Connector can do