What emission standards does this MCP use?

The MCP uses standardized EPA-based emission factors to ensure calculations meet regulatory requirements.

Can I include LDAR data in my calculations?

Yes, the fugitive emissions capability allows you to include an optional LDAR reduction factor.

Which AI clients can use this MCP?

You can use this with any MCP-compatible client, including Claude, Cursor, Windsurf, and VS Code.

Does this calculate both methane and VOCs?

Yes, the capabilities are designed to calculate both methane and VOC emissions.

How does it handle different types of equipment?

The agent processes your specific equipment inventories, such as pneumatic controllers or valves, to determine totals.

How are venting emissions calculated?

Venting emissions are calculated using the calculate_venting_emissions capability, which multiplies equipment quantities by specific emission factors and applies gas composition data to derive VOC mass.

Can I account for LDAR program benefits?

Yes. When using calculate_fugitive_emissions, you can provide an ldarReductionFactor to reduce the raw fugitive emission estimate based on the efficiency of your Leak Detection and Repair program.

What emission standards does this server follow?

The server utilizes standardized emission factors based on EPA estimation methods for both venting and fugitive sources.

An astronaut overseeing a futuristic data hub

Download PDF Markdown Version

Connect Venting Fugitive Emissions Calculator to your AI

Set it up once and it works in ChatGPT, Claude, Cursor, and any other client you love. It all runs safely in the background, so you can relax and focus on what really matters. Automate methane and VOC emission calculations for oil and gas compliance.

Ask AI about this Connector

Developed, maintained, and hosted by Vinkius.

MCP VERIFIED · PRODUCTION READY · VINKIUS GUARANTEED

Waiting for input…

Works with modern AI clients that support MCP, including ChatGPT, Claude, Cursor, and more.

Your AI does the work. We keep it safe and sound.

No other AI tool gives you this. Your workflow runs in the client you already love, your account stays protected, and you decide what the agent can and cannot do. It is the whole reason to make the switch.

Each Connector lives inside our infrastructure, the same place where your workflow runs. The three things below are already part of it, working quietly in the background so you never have to think about them. Nothing to add, nothing to set up, nothing to worry about.

V8 Isolate01

Each Connector runs inside its own sealed environment.

Each Connector runs inside its own sealed V8 runtime — no access to your files, your system, or other servers. A Connector never sees past its own request.

Kill Switch02

One switch stops every agent. Instantly.

One action deactivates every Connector, revokes every token, and ends every session at once. AI Governance keeps the record.

FinOps per User03

Spending limits that pause instead of surprise.

Every user keeps their own connections and credentials, isolated from everyone else. Anything that would cross your spending limit is held for your approval, not billed.

Three controls, built into the layer your AI connects through.

Curated set · 2 capabilities

We ship only the actions that matter.

Capability set01 / 01

01-02

2 capabilities in this set.

Part of 2 available through Venting & Fugitive Emissions.

01
Calculate fugitive emissions
This capability calculates unintentional leakages from pressurized components. It allows you to include optional LDAR reduction factors in your totals.
02
Calculate venting emissions
This capability determines total emissions resulting from intentional gas releases via venting equipment.

Real work

What teams actually run

Regulatory Reporting

Generate methane and VOC emission totals for official environmental filings.

LDAR Program Evaluation

Calculate how much leakage is reduced by your current repair programs.

Facility Auditing

Compare venting versus fugitive emissions to identify major leak sources.

Inventory Analysis

Convert a list of pneumatic controllers or valves into mass emission data.

One connector, every AI

Venting & Fugitive Emissions works with the most popular AI clients.

These are the most popular clients, each with a step-by-step guide: one link, set up once, with governance and visibility built in. And because everything runs on the MCP standard, the same connection also works in any other compatible client — nothing to rebuild.

Building your own app? The connector is yours to use.

You don't need a client to put Venting & Fugitive Emissions to work: the same hosted connection plugs into your own applications and agent code, with the same governance on every request. Build with it, chat with it — one connection for both.

Observed, not estimated

868ms average. Fast in production.

Venting & Fugitive Emissions is checked daily against the live service.

Daily averagePeak 1089ms

Oct 3Today

Fastest day: 700ms
Slowest day: 1089ms
14-day trend: Slowing+14%

Connect your client

One URL. Every client.

Activate the Connector, copy your link, and paste it into the client you already use. 2 capabilities arrive ready to run.

Preview access · not provider authentication

The vk_preview_* token belongs to Vinkius preview infrastructure. It lets Claude discover and display the capabilities of Venting & Fugitive Emissions, so you can see the experience inside your AI.

It does not authenticate your account with Venting & Fugitive Emissions. Actions requiring credentials or live account data may not run until you activate the Connector and authorize the service.

Venting & Fugitive Emissions Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_mg07FzIVtehFHoemDx14CWohFyvH1lOB7vA3fv4f/mcp

Claude Desktop

Follow the steps below to connect in seconds.

1In Claude Desktop, open Settings → Connectors.
2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
3Click Add and start a new chat — Venting & Fugitive Emissions capabilities are ready to use.

Configuration · claude_desktop_config.jsonCopy

{
  "mcpServers": {
    "venting-fugitive-emissions-calculator-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_mg07FzIVtehFHoemDx14CWohFyvH1lOB7vA3fv4f/mcp"
    }
  }
}

Claude
ChatGPT
Cursor
VS Code
Windsurf
Claude Code
JetBrains
Cline

Step-by-step instructions for each client are in the guide. How to connect

Guided setup for Claude? Set up Venting & Fugitive Emissions in Claude and other AIs

See all the AI clients this connector works with ↑

Who it's for

Built for the work Venting & Fugitive Emissions owners hand off.

This MCP is designed for professionals managing environmental compliance in the oil and gas industry.

01
Environmental Engineers
They hand off equipment inventories to the agent to generate compliance reports.
02
Compliance Officers
They use the agent to verify emission totals against regulatory standards.
03
Facility Managers
They use the agent to quickly estimate the impact of LDAR programs on total emissions.

FAQ

Questions Venting & Fugitive Emissions owners ask.

01
What emission standards does this MCP use?
The MCP uses standardized EPA-based emission factors to ensure calculations meet regulatory requirements.
02
Can I include LDAR data in my calculations?
Yes, the fugitive emissions capability allows you to include an optional LDAR reduction factor.
03
Which AI clients can use this MCP?
You can use this with any MCP-compatible client, including Claude, Cursor, Windsurf, and VS Code.
04
Does this calculate both methane and VOCs?
Yes, the capabilities are designed to calculate both methane and VOC emissions.
05
How does it handle different types of equipment?
The agent processes your specific equipment inventories, such as pneumatic controllers or valves, to determine totals.
06
How are venting emissions calculated?
Venting emissions are calculated using the calculate_venting_emissions capability, which multiplies equipment quantities by specific emission factors and applies gas composition data to derive VOC mass.
07
Can I account for LDAR program benefits?
Yes. When using calculate_fugitive_emissions, you can provide an ldarReductionFactor to reduce the raw fugitive emission estimate based on the efficiency of your Leak Detection and Repair program.
08
What emission standards does this server follow?
The server utilizes standardized emission factors based on EPA estimation methods for both venting and fugitive sources.

Explore

More in Compliance

Connect Venting & Fugitive Emissions to Claude, Cursor, ChatGPT & more

Your AI does the work. We keep it safe and sound.

Each Connector runs inside its own sealed environment.

One switch stops every agent. Instantly.

Spending limits that pause instead of surprise.

We ship only the actions that matter.

01-02

Calculate fugitive emissions

Calculate venting emissions

What teams actually run

Regulatory Reporting

LDAR Program Evaluation

Facility Auditing

Inventory Analysis

Building your own app? The connector is yours to use.

Venting & Fugitive Emissions Connector

Claude Desktop

Environmental Engineers

Compliance Officers

Facility Managers

What emission standards does this MCP use?

Can I include LDAR data in my calculations?

Which AI clients can use this MCP?

Does this calculate both methane and VOCs?

How does it handle different types of equipment?

How are venting emissions calculated?

Can I account for LDAR program benefits?

What emission standards does this server follow?

VOC Emission Calculator AI Connector

Fugitive Emissions Estimator AI Connector

Emission Calculations for Flaring AI Connector

Methane Emission Quantification AI Connector

Suggestions

Emissions API AI Connector

Merger & Acquisition Analysis for Oil and Gas AI Connector

Oil and Gas Cost Inflation Forecast AI Connector

Oil PVT Properties Calculator AI Connector