• PASS
  • FAIL
  • DATA
  • HUMAN

How to audit restroom accessibility with your AI

Connect the Accessibility Checker to your AI client to run dimension-based clearance checks. It handles the math so you don't have to.

Ask AI about this page

Short answer

Can my AI check if a restroom is big enough for a wheelchair?

Yes. Your AI uses specific dimension inputs to confirm if the floor area and maneuvering space meet accessibility standards. You'll get a clear breakdown of clearance issues and space requirements.

Audit outcomes

Where your results land.

The AI processes your measurements and organizes the findings into these categories.

PASS

Compliant spaces

The AI identifies areas where the floor dimensions and turning radii meet your specified requirements.

FAIL

Clearance violations

The AI flags specific spots where the maneuvering space is too tight for mobility aids.

DATA

Dimension logs

You get a structured list of the exact measurements used to determine if a space passes or fails.

HUMAN

Manual inspection

The AI highlights areas where physical measurements are missing or where a human needs to verify a tight fit.

The workflow

What your AI does when the data arrives.

The AI acts as a specialized calculator for spatial compliance.

  1. Input dimensions

    You provide the raw measurements for the restroom floor and the specific turning radius needed for a mobility aid.

    check_bathroom_spaciousness

  2. Calculate clearance

    The AI compares your inputs against the required maneuvering space thresholds.

    check_bathroom_spaciousness

  3. Identify bottlenecks

    The AI pinpoints exactly where the floor area fails to provide enough room for a device to turn.

    check_bathroom_spaciousness

  4. Generate report

    The AI summarizes which dimensions are sufficient and which ones fall short of the target.

    check_bathroom_spaciousness

Try it

Copy these to start.

Use these prompts to kick off an audit.

Starting points

Swap out the bracketed text with your actual measurements or site names.

Accessibility Checker Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_vAK4Tj4X6MRFVVEtworit1yfP7SMpfvjpPA269Pb/mcp

Claude Desktop

Follow the steps below to connect in seconds.

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — Accessibility Checker capabilities are ready to use.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "accessibility-checker-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_vAK4Tj4X6MRFVVEtworit1yfP7SMpfvjpPA269Pb/mcp"
    }
  }
}
Copy into chat04

  • Check the restroom in the North Wing using these dimensions: [width] by [length].

  • Does the floor area in the main lobby restroom provide enough maneuvering space for a 60-inch turning radius?

  • Audit the accessibility of the small restroom in Suite 202 based on these measurements: [input dimensions].

  • Compare the current restroom floor area against the required clearance for a standard mobility aid.

  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

Start here

Connect Accessibility Checker once, then ask.

One click connects the MCP to your preferred client. Your credentials stay encrypted and the setup is handled on our end.

Connect Accessibility Checker to your AI

FAQ

How this task behaves.

  • 01

    Can the AI physically measure the room?

    No. You must provide the dimensions or measurement data for the AI to process.

  • 02

    Does the AI create official compliance certificates?

    No. The AI provides data-driven checks based on your inputs, but it does not issue legal or official certification.

  • 03

    Can it check the height of grab bars?

    No. This specific tool only checks floor area and maneuvering space dimensions.

  • 04

    Will the AI change my floor plans?

    No. The AI only reads and analyzes the data you provide; it cannot edit your files or drawings.

  • 05

    What happens if my measurements are wrong?

    The AI only analyzes the numbers you give it. If the input data is incorrect, the results will be incorrect.

  • More questions about Accessibility Checker? The Connector page answers them. See everything the Accessibility Checker Connector can do

Connect Accessibility Checker to Claude, Cursor, ChatGPT & more