• VERIFICATION
  • ANALYSIS
  • COMPLIANCE
  • HUMAN

How to audit historical carbon footprints with your AI

Connect ElectricityMap to your AI client to access grid data. Your agent then pulls the specific metrics needed to validate past emissions.

Ask AI about this page

Short answer

How can I audit historical carbon footprints with my AI?

Your AI pulls historical carbon intensity and energy production data from the grid. This lets you verify past emissions against actual energy mixes. You get a clear view of the carbon impact for any specific period.

Audit outcomes.

Where your data lands.

The AI converts raw grid telemetry into actionable audit evidence.

VERIFICATION

Validated emission reports

The AI compares your reported usage against actual grid intensity. You get a data-backed confirmation of your historical footprint.

ANALYSIS

Energy mix insights

Your agent identifies which energy sources drove your footprint. It breaks down the specific impact of renewables versus fossil fuels.

COMPLIANCE

Audit-ready documentation

The AI organizes historical data into clean summaries. You can use these findings to support formal sustainability disclosures.

HUMAN

Expert review

The AI flags anomalies in the data. You step in to interpret these shifts and sign off on the final audit results.

The workflow

What your AI does when the data arrives.

Your agent acts as a data analyst, pulling specific grid metrics to answer your audit questions.

  1. Retrieve intensity data

    Your agent pulls the carbon intensity levels for a specific location and timeframe. This forms the baseline for your footprint calculation.

    get_carbon_intensity_history

  2. Analyze energy sources

    The AI looks at how the grid was producing power. It identifies the ratio of wind, solar, and gas used during your period of interest.

    get_power_breakdown_history

  3. Cross-reference usage

    Your agent maps your energy consumption against the historical intensity data. It calculates the total carbon impact for that specific window.

    get_carbon_intensity_history

  4. Summarize findings

    The AI compiles the intensity and breakdown data into a cohesive report. It highlights periods of high or low carbon intensity for your review.

    get_power_breakdown_history

Try it

Copy these to start.

Use these prompts to begin your audit.

Starting points

Swap the bracketed info for your specific location and date ranges.

ElectricityMap Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_bRSjwdkotEV2QaLFMmVMdtmMeKdeuslL9oSbyjJQ/mcp

Claude Desktop

Follow the steps below to connect in seconds.

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — ElectricityMap capabilities are ready to use.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "electricitymap-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_bRSjwdkotEV2QaLFMmVMdtmMeKdeuslL9oSbyjJQ/mcp"
    }
  }
}
Copy into chat04

  • Get the carbon intensity history for [Location] from [Date] to [Date].

  • Show me the power breakdown history for the [Location] grid during [Month/Year].

  • Compare the carbon intensity in [Location] last week versus the same week last year.

  • Analyze the energy mix for [Location] on [Specific Date] to see how much solar was used.

  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

Start here

Connect ElectricityMap once, then ask.

One click connects the MCP to your client. Your credentials stay encrypted and you can start asking questions immediately.

Connect ElectricityMap to your AI

FAQ

How this task behaves.

  • 01

    Can the AI change my actual energy consumption?

    No. The AI only reads historical grid data to provide information; it cannot control or modify your energy usage.

  • 02

    Does the AI calculate my company's specific footprint automatically?

    No. The AI provides the grid intensity and energy mix data. You must provide your own consumption numbers for the AI to calculate your specific footprint.

  • 03

    Can I get data for any location in the world?

    The AI can only access locations covered by the ElectricityMap dataset.

  • 04

    Will the AI write my final sustainability report?

    The AI can draft summaries and organize data, but the final report must be reviewed and finalized by you.

  • 05

    Can the AI delete historical grid records?

    No. The tools are read-only. The AI can only retrieve data, never modify or delete it.

  • More questions about ElectricityMap? The Connector page answers them. See everything the ElectricityMap Connector can do

Connect ElectricityMap to Claude, Cursor, ChatGPT & more