• CRITICAL
  • HEALTHY
  • LOGS
  • HUMAN

How to audit beacon battery levels with your AI

Connect Estimote to your AI client once. After that, you can pull battery reports without ever opening the dashboard.

Ask AI about this page

Short answer

How can I check beacon battery levels using AI?

Your AI uses the Estimote MCP to pull a list of all your beacons and their current battery percentages. You can then ask it to flag any specific devices that are running low. This gives you a clear list of hardware that needs attention.

Where your data lands.

Maintenance outcomes.

The AI scans your fleet and organizes the results into these categories.

CRITICAL

Low battery alerts

The AI identifies beacons with failing power levels. You get a specific list of IDs that need battery swaps immediately.

HEALTHY

Stable fleet status

The AI filters out all devices with sufficient charge. This removes the noise so you can focus on the problems.

LOGS

Device inventory

The AI compiles a full list of all active beacons. You can use this to verify your total fleet count against your records.

HUMAN

Physical maintenance

The AI provides the specific beacon IDs and locations. You use this list to physically visit the sites and replace the batteries.

The workflow

What your AI does when the request arrives.

The AI acts as the bridge between your chat interface and your Estimote hardware.

  1. Fetch device data

    The AI pulls the current status and battery telemetry for every beacon in your deployment.

    list_beacon_devices

  2. Filter by battery

    The AI scans the returned data to find any devices where the battery level is low.

    list_beacon_devices

  3. Summarize findings

    The AI groups the low-battery beacons by location or ID to make the list readable.

    list_beacon_devices

  4. Prepare maintenance list

    The AI formats the final list of problematic devices into a clear report for your technician.

    list_beacon_devices

Try it

Copy these to start.

Use these prompts to begin your audit.

Starting points

These are opening lines. You should swap in your own battery thresholds or specific location names.

Estimote Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_YWJxFwWDkHG6WdRzBFi8x8MrOjpQgfXXRusEJ7I2/mcp

Claude Desktop

Follow the steps below to connect in seconds.

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — Estimote capabilities are ready to use.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "estimote-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_YWJxFwWDkHG6WdRzBFi8x8MrOjpQgfXXRusEJ7I2/mcp"
    }
  }
}
Copy into chat04

  • List all my Estimote beacons and tell me which ones have less than 20% battery.

  • Show me a summary of all beacons located in the North Warehouse that need battery replacements.

  • Which beacons in my fleet are currently reporting low battery levels?

  • Give me a list of all beacon IDs that have a battery level below 15%.

  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

Start here

Connect Estimote once, then ask.

You only need to link your account once. Your credentials stay encrypted, and you can immediately start asking questions about your beacons in your preferred AI client.

Connect Estimote to your AI

FAQ

How this task behaves.

  • 01

    Can the AI change the battery settings on my beacons?

    No. The AI can only read the current status and battery levels. It cannot change any hardware configurations.

  • 02

    Will the AI delete any of my devices?

    No. This MCP only provides read access to your device list. It has no capability to delete or remove beacons.

  • 03

    How often does the AI see the battery updates?

    The AI sees the data exactly as it is reported in the Estimote dashboard at the moment you ask the question.

  • 04

    Can I use this to find beacons that are offline?

    Yes. Since the AI pulls the full device list, you can ask it to identify beacons that are not reporting status.

  • 05

    Do I need to stay logged into the Estimote dashboard?

    No. Once the connection is established through Vinkius, your AI client handles the requests independently.

  • More questions about Estimote? See everything the Estimote Connector can do

Connect Estimote to Claude, Cursor, ChatGPT & more