• TOTAL AREA
  • FOOTPRINT
  • LIMITS
  • HUMAN

How to calculate maximum buildable area with your AI

Connect this MCP to your AI client to turn zoning text and plot dimensions into hard building limits.

Ask AI about this page

Short answer

How do I find my max buildable area?

Give your AI the plot size and the local zoning rules, such as FAR and coverage percentages. Your agent uses these values to output the exact total floor area and footprint limits allowed for the site. You'll get a clear breakdown of the math used for these constraints.

The results you get

Calculated site constraints

Once you provide the site data, your AI produces these specific results.

TOTAL AREA

Maximum floor area

The AI calculates the total square footage allowed across all floors using the provided FAR. You get a hard ceiling for your building size.

FOOTPRINT

Maximum site coverage

This tells you how much of the actual ground the building can cover. It ensures you don't violate setback or open space requirements.

LIMITS

Zoning constraints

The AI identifies the specific boundaries set by your local code. You'll see exactly where the math hits the legal limit.

HUMAN

Review and verify

The AI provides the raw numbers, but you must check these against local municipal documents. It doesn't replace a professional land survey or legal review.

The workflow

What your AI does when the data arrives.

The AI processes your zoning inputs through specific mathematical tools to find your limits.

  1. Parse zoning rules

    Your agent reads the plot dimensions and the specific FAR or coverage percentages you provide.

    max_total_area

  2. Calculate floor limits

    The AI determines the total allowable building volume based on the site area.

    max_total_area

  3. Determine footprint

    The agent calculates the maximum ground coverage allowed for the specific lot.

    max_site_coverage

  4. Summarize constraints

    The AI bundles the area and coverage results into a single report for your project planning.

    max_total_areamax_site_coverage

Try it

Copy these to start.

Use these prompts to kick off your calculation.

Starting points

Swap the bracketed text with your actual lot size and zoning percentages.

Floor Area Ratio Calculator Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_XbYkfNKkC4xa7SaG6NAsFGlR1EhoNaqGedaollbW/mcp

Claude Desktop

Follow the steps below to connect in seconds.

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — Floor Area Ratio Calculator capabilities are ready to use.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "floor-area-ratio-calculator-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_XbYkfNKkC4xa7SaG6NAsFGlR1EhoNaqGedaollbW/mcp"
    }
  }
}
Copy into chat04

  • Calculate the max buildable area for a [5,000] sq ft lot with an FAR of [0.5].

  • What is the maximum site coverage for a [10,000] sq ft plot if the limit is [40%]?

  • Using the Floor Area Ratio Calculator, find the total floor area for a lot that is [2,500] sq ft with a [1.2] FAR.

  • Check the footprint limits for a [3,000] sq ft lot with a [35%] coverage rule.

  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

Start here

Connect Floor Area Ratio Calculator once, then ask.

One click connects this MCP to your preferred client. Your credentials stay encrypted and the setup is handled on our end.

Connect Floor Area Ratio Calculator to your AI

FAQ

How this task behaves

  • 01

    Can the AI calculate setbacks?

    No. The AI only calculates total area and site coverage based on the tools provided.

  • 02

    Does the AI check local zoning laws automatically?

    No. You must provide the specific FAR and coverage rules from your local municipality for the AI to use.

  • 03

    Can the AI draw a site plan?

    No. It only provides the numerical limits for area and coverage.

  • 04

    Will the AI submit permit applications?

    No. The AI is for calculation only; all official filings must be done by you or a professional.

  • 05

    Does it handle multi-family zoning differently?

    The AI follows whatever FAR and coverage numbers you input, regardless of the zoning type.

  • More questions about Floor Area Ratio Calculator? The Connector page answers them. See everything the Floor Area Ratio Calculator Connector can do

Connect Floor Area Ratio Calculator to Claude, Cursor, ChatGPT & more