• STAFF
  • EQUIPMENT
  • AUDIT
  • HUMAN

How to monitor shop floor activity with your AI

Connect Fusion Operations to your AI client to get live status updates. You can check on staff and equipment without walking the floor.

Ask AI about this page

Short answer

How do I see who is working and what machines are on?

Your AI pulls live lists of active personnel and running equipment from your floor management system. You get a real-time snapshot of current activity through your chat interface. This breakdown shows how you can track your floor status.

Real-time floor visibility.

Where your data lands.

The AI pulls specific information to give you these outcomes.

STAFF

Active worker lists

Your AI identifies which team members are currently clocked in or assigned to stations. You'll know exactly who is on the floor right now.

EQUIPMENT

Machine status updates

Get a list of every machine currently in operation. This helps you spot idle equipment or unexpected downtime immediately.

AUDIT

Activity logs

Use the data to see how long specific machines have been running. This gives you a clear view of production pacing.

HUMAN

Manual intervention

The AI identifies the status, but you decide when to send a supervisor to a station or restart a machine. The AI only reports what it sees.

The workflow

What your AI does when you ask for floor status.

The AI acts as a bridge between your chat interface and your shop floor data.

  1. Identify personnel

    The AI scans your floor management system to find everyone currently active.

    list_floor_workers

  2. Check equipment

    The AI pulls a list of all machines that are currently powered on or running a cycle.

    list_floor_machines

  3. Compare activity

    Your agent looks at the worker list and the machine list to see if staffing levels match machine usage.

    list_floor_workerslist_floor_machines

  4. Report status

    The AI summarizes the findings into a plain text update for you to read.

    list_floor_machines

Try it

Copy these to start.

Use these prompts to test the connection immediately.

Starting points

These are basic questions to get you started. Swap out the specific station or machine names with your own.

Fusion Operations Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_CkLFrN41db4C3x3fR1INdMUNeWNYoil1xPU18okW/mcp

Claude Desktop

Follow the steps below to connect in seconds.

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — Fusion Operations capabilities are ready to use.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "fusion-operations-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_CkLFrN41db4C3x3fR1INdMUNeWNYoil1xPU18okW/mcp"
    }
  }
}
Copy into chat04

  • Who is currently active on the shop floor?

  • Which machines are running right now?

  • List all workers assigned to the assembly station.

  • Are there any machines currently idle?

  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

Start here

Connect Fusion Operations once, then ask.

Just link your account once. Your credentials stay encrypted and secure, and you can start asking questions in your preferred AI client immediately.

Connect Fusion Operations to your AI

FAQ

How this task behaves.

  • 01

    Can the AI stop a machine if it sees an error?

    No. The AI can only list the status of machines. You must use your physical controls or local software to stop equipment.

  • 02

    Can the AI change a worker's shift or schedule?

    No. The AI only reads the current worker list. It cannot modify personnel records or change schedules.

  • 03

    How often does the AI see new data?

    The AI pulls fresh data from the floor management system every time you send a prompt.

  • 04

    Does the AI know which specific worker is on which machine?

    It can show you the list of workers and the list of machines, but it only links them if your system explicitly maps them.

  • 05

    Can I use this with any AI client?

    Yes, as long as the client supports the Model Context Protocol (MCP).

  • More questions about Fusion Operations? The Connector page answers them. See everything the Fusion Operations Connector can do

Connect Fusion Operations to Claude, Cursor, ChatGPT & more