• READ
  • WRITE
  • LOGIC
  • HUMAN

How to control IoT device state with your AI

Connect Golioth to your AI client to manage hardware configurations and sensor data in real time.

Ask AI about this page

Short answer

How can I use AI to manage my IoT hardware?

You use your AI to read current sensor values and write new configuration settings to LightDB. This lets you adjust device behavior or monitor thresholds using natural language. You'll see how the data flows between your chat and your hardware below.

Control outcomes

Device management results

What happens when you give your AI a command.

READ

Live sensor monitoring

The AI pulls current values from LightDB. You get an immediate snapshot of your hardware's status.

WRITE

Remote configuration

The AI updates device settings in the database. Your hardware reacts to these new parameters automatically.

LOGIC

Threshold management

You can tell the AI to change when an alert triggers. It updates the specific LightDB keys that control your logic.

HUMAN

Manual oversight

The AI handles the data updates, but you decide when a threshold is too high or low. You remain the final decision maker.

The workflow

What your AI does when <the thing arrives>.

The AI acts as the bridge between your text commands and the Golioth LightDB.

  1. Check current status

    The AI looks up the existing values in your device's LightDB to understand the current environment.

    get_lightdb_state

  2. Analyze the data

    Your agent compares the retrieved sensor data against your requested changes or desired limits.

    get_lightdb_state

  3. Update settings

    The AI writes the new configuration or threshold values directly to the database.

    set_lightdb_state

  4. Confirm changes

    The AI verifies the write was successful and tells you the new state of the device.

    get_lightdb_stateset_lightdb_state

Try it

Copy these to start.

Use these prompts to begin interacting with your hardware.

Starting points

Replace the bracketed text with your specific device IDs or sensor names.

Golioth Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_wYHRxDIii2rfGW0NRhCGA52xXLzwPnzMTVaGj6Ve/mcp

Claude Desktop

Follow the steps below to connect in seconds.

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — Golioth capabilities are ready to use.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "golioth-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_wYHRxDIii2rfGW0NRhCGA52xXLzwPnzMTVaGj6Ve/mcp"
    }
  }
}
Copy into chat04

  • What is the current temperature reading in the [sensor_id] LightDB state?

  • Change the [threshold_name] in LightDB to [value] for my device.

  • Check the current configuration for [device_id] and tell me if any values look out of range.

  • Set the [parameter_name] to [value] and confirm when it is done.

  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

Start here

Connect Golioth once, then ask.

Just link your account through the Vinkius dashboard. Your credentials stay encrypted, and you can start chatting with your hardware immediately.

Connect Golioth to your AI

FAQ

How this task behaves

  • 01

    Can the AI physically move my hardware?

    No. The AI only writes data to LightDB. Your hardware must be programmed to watch those specific LightDB keys to take physical action.

  • 02

    Can the AI delete my entire LightDB database?

    No. The tools only allow for getting state or setting specific states. There is no tool provided to delete or wipe the database.

  • 03

    Does the AI need to know my Golioth password?

    No. Vinkius manages the connection securely so your AI client never sees your login credentials.

  • 04

    Can I use this to monitor multiple devices at once?

    Yes, as long as you specify the correct LightDB keys or device identifiers in your prompts.

  • 05

    Will the AI automatically fix a sensor if it breaks?

    No. The AI can only change data values. It cannot perform hardware repairs or diagnostic resets unless those functions are triggered by a LightDB change.

  • More questions about Golioth? The Connector page answers them. See everything the Golioth Connector can do

Connect Golioth to Claude, Cursor, ChatGPT & more