• DATA
  • ALERTS
  • LOGS
  • HUMAN

How to monitor real-time water levels with your AI

Connect the NOAA Tides & Currents API to your agent once. From then on, your AI pulls live sensor data whenever you ask.

Ask AI about this page

Short answer

How can I track live water levels using my AI?

Your AI pulls live measurements from NOAA sensors using this MCP. You can request specific water heights or temperature readings to monitor coastal conditions. This setup gives you direct access to NOAA's data through your chat interface.

Data outcomes

What you get from the sensors

The AI turns raw NOAA data into useful information.

DATA

Live sensor readings

The AI pulls current water levels and temperatures from NOAA stations. You get the specific numbers you need for your location.

ALERTS

Threshold monitoring

You can ask your AI to check if levels hit a certain height. It compares live data against your limits to keep you informed.

LOGS

Historical snapshots

The AI gathers data points over a specific window. You can then move these readings into a spreadsheet or a local file.

HUMAN

Manual verification

The AI provides the data, but you decide if the readings require a physical site visit or an official report.

The workflow

What your AI does when the data is requested.

The AI acts as the bridge between your prompts and the NOAA sensor network.

  1. Fetch water levels

    The AI identifies the correct NOAA station and pulls the most recent height measurements.

    get_water_levels

  2. Check temperature

    The agent requests the latest thermal data from the sensor to provide a complete environmental picture.

    get_water_temperature

  3. Analyze trends

    The AI looks at the retrieved values to see if the water is rising or falling.

    get_water_levels

  4. Report findings

    The agent summarizes the height and temperature data into a clear message for you.

    get_water_levelsget_water_temperature

Try it

Copy these to start.

Use these prompts to begin interacting with NOAA data.

Starting points

Swap out the station names or locations for the specific NOAA sensor sites you want to track.

NOAA Tides & Currents Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_j43wFvI03r3JYScuLizlD97RP3wpgyK3XsNXZdby/mcp

Claude Desktop

Follow the steps below to connect in seconds.

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — NOAA Tides & Currents capabilities are ready to use.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "noaa-tides-currents-api-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_j43wFvI03r3JYScuLizlD97RP3wpgyK3XsNXZdby/mcp"
    }
  }
}
Copy into chat04

  • Get the current water level for the station in San Francisco.

  • What is the water temperature at the station near Miami right now?

  • Check the water levels for the station in New York and tell me if they are rising.

  • Compare the water level and temperature for the station in Seattle.

  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

Start here

Connect NOAA Tides & Currents API once, then ask.

One click connects the MCP to your client. Your credentials stay encrypted, and you can start asking for data immediately.

Connect NOAA Tides & Currents API to your AI

FAQ

How this task behaves

  • 01

    Can the AI change the NOAA sensor settings?

    No. The AI can only read data from the sensors; it cannot modify any NOAA hardware or configurations.

  • 02

    Does the AI automatically send alerts to my phone?

    No. The AI provides the data in your chat interface. You must set up your own notification system if you want external alerts.

  • 03

    Can I get temperature data?

    Yes, the AI can pull live water temperature readings from supported stations.

  • 04

    Can the AI predict future tides?

    No. The tools are limited to retrieving current and recent measurements from the sensors.

  • 05

    Can the AI delete historical NOAA data?

    No. The AI only has read access to the sensor data and cannot delete or alter any records.

  • More questions about NOAA Tides & Currents API? The Connector page answers them. See everything the NOAA Tides & Currents API Connector can do

Connect NOAA Tides & Currents to Claude, Cursor, ChatGPT & more