• LOGISTICS
  • SCHEDULING
  • SAFETY
  • HUMAN

How to predict tidal schedules with your AI

Connect the NOAA Tides & Currents API to your agent once. From there, you can pull real-time and predicted water levels for any station.

Ask AI about this page

Short answer

How can I get tide predictions using my AI?

Your AI uses the NOAA Tides & Currents API to fetch specific high and low tide times for any coastal station you name. You'll get precise schedules to coordinate boat movements or dockings. This breakdown shows how to set it up and run queries.

The outcomes

What you get from these predictions

The AI handles the data retrieval so you can focus on the logistics.

LOGISTICS

Plan vessel arrivals

The AI pulls tide heights to help you decide when a boat can safely enter a shallow harbor. It gives you the exact windows for movement.

SCHEDULING

Map tide windows

Get a list of high and low tide times for a specific station. You can use this to set work schedules for maritime operations.

SAFETY

Monitor water levels

Check predicted water levels against vessel drafts. This helps you avoid grounding during low tide cycles.

HUMAN

Final decision making

The AI provides the raw tidal data and schedules. You must still make the final call on whether it is safe to proceed based on your specific vessel or cargo.

The workflow

What your AI does when the station is identified.

The AI acts as a bridge between your chat and NOAA's real-time data.

  1. Identify station

    Your AI identifies the correct NOAA coastal station based on the location or station ID you provide.

    get_tide_predictions

  2. Fetch schedules

    The agent requests the specific high and low tide times for the requested timeframe.

    get_tide_predictions

  3. Format data

    The AI organizes the raw tidal numbers into a readable list or table for your planning.

    get_tide_predictions

  4. Analyze windows

    The agent compares the tide times against your specific requirements to highlight safe periods.

    get_tide_predictions

Try it

Copy these to start.

Use these prompts to trigger the tidal data retrieval.

Starting points

Swap out the station names and dates for your specific needs.

NOAA Tides & Currents Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_j43wFvI03r3JYScuLizlD97RP3wpgyK3XsNXZdby/mcp

Claude Desktop

Follow the steps below to connect in seconds.

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — NOAA Tides & Currents capabilities are ready to use.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "noaa-tides-currents-api-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_j43wFvI03r3JYScuLizlD97RP3wpgyK3XsNXZdby/mcp"
    }
  }
}
Copy into chat04

  • Get the high and low tide predictions for the San Francisco station for tomorrow.

  • What are the tide times at station 9414290 for the next 24 hours?

  • Show me the tide schedule for Miami, FL for this weekend.

  • List the predicted high tides for the Port of Mobile for the upcoming week.

  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

Start here

Connect NOAA Tides & Currents API once, then ask.

One click connects the API to your client. Your credentials stay encrypted, and you can immediately start asking for tidal data.

Connect NOAA Tides & Currents API to your AI

FAQ

How this task behaves

  • 01

    Can the AI change the tide levels?

    No. The AI only reads predicted data from NOAA; it cannot influence or change real-world water levels.

  • 02

    Does the AI provide real-time sensor data?

    Yes, it can pull the most recent observations and predictions from the NOAA stations.

  • 03

    Can the AI automatically pilot my boat?

    No. The AI provides the tidal data, but all physical maritime movements and navigation decisions remain your responsibility.

  • 04

    Can I get predictions for any location in the world?

    No. The AI is limited to the stations and data provided by the NOAA Tides & Currents API.

  • 05

    Will the AI save these schedules to a file?

    The AI can present the data in a table or list, but it does not have a tool to write or save files to your local hard drive.

  • More questions about NOAA Tides & Currents API? See everything the NOAA Tides & Currents API Connector can do

Connect NOAA Tides & Currents to Claude, Cursor, ChatGPT & more