• GAP ANALYSIS
  • HARDWARE STATUS
  • MAP SYNC
  • HUMAN ACTION

How to audit indoor beacon coverage with your AI

Connect Pointr to your agent to automate the comparison between hardware status and your physical floor plans.

Ask AI about this page

Short answer

How can I check if my BLE beacons cover the whole building?

Your AI pulls the current status of all active beacons and overlays that data onto your building's level maps. It identifies specific areas where the hardware density is too low to provide reliable positioning. You get a clear list of where to add more hardware.

Audit results

Where coverage gaps appear

The AI processes your spatial data to produce these specific results.

GAP ANALYSIS

Identify dead zones

The AI compares beacon locations to the floor map to find areas with no signal. You'll see exactly where coverage drops off.

HARDWARE STATUS

Check beacon health

The agent pulls the current status of every beacon. This shows you which devices are active and which are offline.

MAP SYNC

Verify floor layouts

The AI pulls the latest level maps to ensure the audit matches your current building configuration.

HUMAN ACTION

Plan hardware installs

The AI flags the specific coordinates for new installs. You decide where to physically mount the next set of beacons.

The workflow

What your AI does when the audit starts.

The AI handles the data heavy lifting by cross-referencing hardware lists with spatial maps.

  1. Gather beacon data

    The agent pulls a complete list of all beacons currently registered in the system.

    list_beacons

  2. Fetch building layout

    The AI retrieves the structural data for the specific building you are auditing.

    get_building

  3. Load level maps

    It pulls the specific floor plans needed to check for signal gaps on individual levels.

    get_level_map

  4. Identify coverage gaps

    The agent compares the beacon coordinates against the map geometry to find empty spaces.

    get_level_map

Try it

Copy these to start.

Use these prompts to kick off your audit.

Starting points

Replace the building names or floor numbers with your actual data.

Pointr Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_C80UHAWpnSofumPbQSlydWBY9PDBa9Vt5avQGQhi/mcp

Claude Desktop

Follow the steps below to connect in seconds.

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — Pointr capabilities are ready to use.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "pointr-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_C80UHAWpnSofumPbQSlydWBY9PDBa9Vt5avQGQhi/mcp"
    }
  }
}
Copy into chat04

  • List all active beacons in the North Tower building.

  • Compare the current beacon locations to the map for Level 2.

  • Find any coverage gaps on the 5th floor of the HQ building.

  • Show me a list of all beacons that are currently offline.

  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

Start here

Connect Pointr once, then ask.

One connection gives your agent access to your Pointr data. Your credentials stay encrypted and secure.

Connect Pointr to your AI

FAQ

How the audit behaves

  • 01

    Can the AI install new beacons for me?

    No. The AI identifies where you need coverage, but you must physically install the hardware.

  • 02

    Can the AI change my building maps?

    No. The AI only reads the existing maps to perform the audit; it cannot edit them.

  • 03

    Does the AI see real-time user locations?

    No. This specific task only looks at beacon status and map geometry, not live user movement.

  • 04

    How does the AI know where a beacon is?

    It uses the coordinates provided by the beacon data in the system.

  • 05

    Can I run this audit for a single floor?

    Yes. You can ask the agent to focus on a specific level map.

  • More questions about Pointr? The Connector page answers them. See everything the Pointr Connector can do

Connect Pointr to Claude, Cursor, ChatGPT & more