• COMPLIANCE
  • SAFETY
  • LOGISTICS
  • HUMAN

How to route oversized loads with your AI

Connect Road511 Trucking to your agent to handle the math and mapping for heavy or tall freight. Once connected, your AI handles the clearance and compliance checks.

Ask AI about this page

Short answer

How can I use AI to route oversized loads?

Your AI uses Road511 Trucking tools to check bridge heights, weight limits, and STAA compliance for specific routes. You get a vetted path that avoids low clearances and restricted roads.

The results of a routed load.

Where your data lands.

Your AI processes the freight specs and returns these specific results.

COMPLIANCE

Verified STAA routes

The AI checks weight and height restrictions against your load specs. You get a route that follows federal and state regulations.

SAFETY

Bridge clearance checks

The agent identifies every bridge on the path that might be too low for your load. You avoid the risk of striking overhead structures.

LOGISTICS

Weight limit validation

The AI cross-references your axle weights with road restrictions. You stay within the legal limits for every segment of the trip.

HUMAN

Final driver approval

The AI provides the data, but you or your driver must confirm the route. The agent cannot physically drive the truck or take legal responsibility for the path.

The workflow

What your AI does when a load arrives.

The AI moves from raw dimensions to a compliant driving path.

  1. Analyze load specs

    Your agent looks at the height, width, and weight of your freight to understand the constraints.

    get_weight_restrictions

  2. Identify safe paths

    The AI finds viable roads that can handle the specific weight of your truck.

    get_truck_routes

  3. Check overhead clearance

    The agent scans the proposed route for any bridges or structures that are too low for your load.

    get_bridge_clearances

  4. Verify compliance

    The AI confirms the route meets all STAA requirements for the specific area.

    get_truck_routes

Try it

Copy these to start.

Use these prompts to trigger the routing process.

Starting points

Swap the bracketed info for your actual load dimensions and destination.

Road511 Trucking Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_eaQJcDn6JcDwbQYIRH7dYgTYTEbyynyIT88cK2iX/mcp

Claude Desktop

Follow the steps below to connect in seconds.

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — Road511 Trucking capabilities are ready to use.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "road511-trucking-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_eaQJcDn6JcDwbQYIRH7dYgTYTEbyynyIT88cK2iX/mcp"
    }
  }
}
Copy into chat04

  • Find a route for a load that is 14 feet tall and 12 feet wide from Chicago to Nashville.

  • Check the weight restrictions for a 80,000 lb load on the route from Dallas to Houston.

  • Are there any bridge clearance issues for a 15 foot tall trailer on this route: [insert route]?

  • Verify if this route is STAA compliant for a heavy oversized load: [insert route].

  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

Start here

Connect Road511 Trucking once, then ask.

One click connects the MCP to your agent. Your credentials stay encrypted and the setup is handled on our end.

Connect Road511 Trucking to your AI

FAQ

How the routing works

  • 01

    Can the AI drive the truck?

    No. The AI only provides the data and routing information for you to use.

  • 02

    Does the AI handle permit applications?

    No. The AI identifies compliant routes, but you must still apply for any necessary state permits yourself.

  • 03

    Can I use this with Claude?

    Yes, as long as you are using an MCP-compatible client like Claude Desktop.

  • 04

    Does it check for real-time traffic?

    No. The tools focus on physical constraints like weight, height, and STAA compliance.

  • 05

    Will the AI change my route automatically?

    No. The AI suggests routes based on your constraints, but you decide which one to follow.

  • More questions about Road511 Trucking? The Connector page answers them. See everything the Road511 Trucking Connector can do

Connect Road511 Trucking to Claude, Cursor, ChatGPT & more