• DATA
  • MODELS
  • INPUT
  • HUMAN

How to calculate RT60 reverberation times with your AI

Connect your agent to acoustic data and let it handle the math. It turns raw room measurements into usable reverberation times.

Ask AI about this page

Short answer

How do I calculate RT60 reverberation times with my AI?

Give your agent the room's dimensions and the absorption coefficients for the surfaces. The AI applies the Sabine or Eyring formulas to provide the RT60. You'll get specific time values for different frequency bands.

The results you get.

Calculated acoustic data.

The AI processes your input into these specific outputs.

DATA

Calculated RT60 values

The AI runs the math for each frequency band. You get the final reverberation time in seconds.

MODELS

Sabine or Eyring

The agent selects the appropriate mathematical model based on your room's absorption levels. You decide which formula to use.

INPUT

Material analysis

The AI interprets your list of surface materials. It maps them to absorption coefficients to feed the calculation.

HUMAN

Acoustic design

The AI provides the numbers, but you decide if the room needs more treatment or different materials.

The workflow

What your AI does when the data arrives.

The agent handles the heavy lifting of acoustic modeling.

  1. Parse dimensions

    The agent extracts volume and surface area from your description. It organizes these into the variables needed for the formulas.

    calculate_reverberation

  2. Map materials

    The AI looks up the absorption coefficients for the materials you listed. It calculates the total absorption for the room.

    calculate_reverberation

  3. Run models

    The agent executes the Sabine or Eyring equations. It performs the division and multiplication required for the RT60 result.

    calculate_reverberation

  4. Format results

    The AI presents the final times in a clear list. You get the results organized by frequency.

    calculate_reverberation

Try it

Copy these to start.

Use these prompts to kick off the calculation.

Starting points

Swap the bracketed text with your actual room measurements and material types.

Room Acoustics Calculator Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_J2Jz23HiuUAKXBjC23e8xi1kYpclmReEnv93NI6S/mcp

Claude Desktop

Follow the steps below to connect in seconds.

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — Room Acoustics Calculator capabilities are ready to use.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "room-acoustics-calculator-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_J2Jz23HiuUAKXBjC23e8xi1kYpclmReEnv93NI6S/mcp"
    }
  }
}
Copy into chat04

  • Calculate the RT60 for a room that is 10m x 12m x 4m with concrete walls and a wooden floor using the Sabine model.

  • What is the reverberation time for a studio with 50m2 of acoustic foam and 20m2 of glass using the Eyring formula?

  • Run an RT60 calculation for a classroom with drywall, carpet, and ceiling tiles using the dimensions in my spreadsheet.

  • Compare the RT60 of a room using the Sabine model versus the Eyring model for these specific dimensions.

  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

Start here

Connect Room Acoustics Calculator once, then ask.

Connect the MCP to your preferred client. Once it's active, you can start feeding it room data immediately.

Connect Room Acoustics Calculator to your AI

FAQ

How this task behaves.

  • 01

    Can the AI design the room layout for me?

    No. The AI calculates the reverberation time based on the dimensions you provide, but it does not move walls or design the physical space.

  • 02

    Does the AI know the absorption coefficients for every material?

    The AI uses standard absorption coefficient data to perform the calculation. If you have specific lab data for a custom material, you must provide it.

  • 03

    Can the AI generate a 3D model of the room?

    No. This tool is strictly for mathematical acoustic calculations. It does not create visual or 3D files.

  • 04

    Will the AI automatically update my CAD files?

    No. The AI only provides the calculated values. You are responsible for applying those numbers to your design software.

  • 05

    Can I choose between Sabine and Eyring?

    Yes. You can specify which model you want the agent to use in your prompt.

  • More questions about Room Acoustics Calculator? The Connector page answers them. See everything the Room Acoustics Calculator Connector can do

Connect Room Acoustics Calculator to Claude, Cursor, ChatGPT & more