• METRICS
  • DENSITY
  • DATA
  • HUMAN

How to analyze land utilization with your AI

Connect the Setback Calculator to your AI client to automate site density math. Once linked, your agent handles the calculations from your site data.

Ask AI about this page

Short answer

How can I calculate land utilization with my AI?

Your AI compares the building footprint to the total lot area to find the percentage of land used. You'll get the specific coverage metrics and density details below.

The outcomes

What you get from the analysis

The AI processes your measurements into these specific results.

METRICS

Coverage percentages

The AI uses calculate_land_utilization_metrics to determine the ratio of building footprint to total lot size. You get the exact percentage of land covered.

DENSITY

Site density checks

Your agent compares the footprint against the lot area to see how much open space remains. This helps you understand the buildable limits of the site.

DATA

Measurement summaries

The AI organizes the footprint and lot dimensions into a clear summary. You can use these numbers for your planning documents.

HUMAN

Design decisions

The AI provides the math, but you decide if the land use meets your project requirements. You make the final call on the site layout.

The workflow

What your AI does when the data arrives.

The AI takes your raw site measurements and runs the math through the connector tools.

  1. Read site data

    Your agent pulls the lot dimensions and building footprint measurements from your chat or files.

    calculate_land_utilization_metrics

  2. Calculate utilization

    The AI runs the math to find the percentage of the lot occupied by the building.

    calculate_land_utilization_metrics

  3. Check footprint

    The agent verifies the building footprint against the total lot area to confirm coverage.

    calculate_land_utilization_metrics

  4. Report results

    The AI presents the final utilization percentage and the remaining open space area.

    calculate_land_utilization_metrics

Try it

Copy these to start.

Use these prompts to start the analysis with your agent.

Starting points

Swap the bracketed values for your actual site dimensions or file names.

Setback Calculator Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_HFJg7Y3YPrZseexW98Rxjz5Ds5KUjgFX9FERD86D/mcp

Claude Desktop

Follow the steps below to connect in seconds.

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — Setback Calculator capabilities are ready to use.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "setback-calculator-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_HFJg7Y3YPrZseexW98Rxjz5Ds5KUjgFX9FERD86D/mcp"
    }
  }
}
Copy into chat04

  • Calculate the land utilization for a lot that is 5000 sq ft with a 1200 sq ft footprint.

  • Using the data in site_plan_v2.csv, find the building coverage percentage.

  • Compare the footprint of the building in my current project to the total lot area.

  • What is the land utilization percentage for the property at 123 Maple Street?

  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

Start here

Connect Setback Calculator once, then ask.

Click the link to connect the MCP to your client. Your login stays encrypted on our side, and the full walkthrough lives on the Connector page.

Connect Setback Calculator to your AI

FAQ

How this task behaves

  • 01

    Can the AI draw the site plan for me?

    No. The AI only calculates the utilization metrics based on the numbers you provide.

  • 02

    Does the AI change my original CAD files?

    No. The AI only reads the data to perform calculations; it cannot modify your design files.

  • 03

    Can I use this with Claude?

    Yes, as long as you are using an MCP-compatible client like Claude Desktop.

  • 04

    Do I need to provide the lot area?

    Yes. The AI needs both the building footprint and the total lot area to calculate the percentage.

  • 05

    Will the AI automatically check local zoning laws?

    No. The AI only calculates the math. You must provide the specific zoning or setback limits you want it to check against.

  • More questions about Setback Calculator? The Connector page answers them. See everything the Setback Calculator Connector can do

Connect Setback Calculator to Claude, Cursor, ChatGPT & more