• COMMANDS
  • STATUS
  • INVENTORY
  • HUMAN

How to control smart home devices with your AI

Connect SmartThings to your AI client to turn your home into a conversational interface. Once connected, your agent handles the hardware logic while you just talk.

Ask AI about this page

Short answer

Can I control my SmartThings devices with my AI?

Yes. You can send commands to toggle switches, adjust brightness, and check if devices are online. This setup lets you manage your hardware through natural language. Here is how the interaction works.

The outcomes

Direct hardware control

Your AI acts as the bridge between your chat interface and your physical devices.

COMMANDS

Execute hardware actions

Your agent sends specific instructions to your switches and plugs. You get immediate physical responses like lights turning on or off.

STATUS

Check device state

The AI looks up whether a device is currently active or idle. You'll know if the garage door is open or if the AC is running.

INVENTORY

See all connected gear

Your agent pulls a full list of everything on your SmartThings account. This helps the AI know exactly what it has permission to control.

HUMAN

Manual overrides

The AI doesn't replace your physical switches or the SmartThings app. You still have full manual control whenever you don't want to use chat.

The workflow

What your AI does when you send a command.

The AI translates your intent into specific hardware instructions.

  1. Identify hardware

    The AI scans your SmartThings account to see what devices are available for interaction.

    list_devices

  2. Verify current state

    Before making changes, the AI checks if a device is on or off to ensure the command makes sense.

    get_device_status

  3. Send the command

    The AI tells the specific device to perform the action you requested, like dimming a bulb.

    execute_device_command

  4. Confirm completion

    The AI checks the device again to make sure the command actually worked.

    get_device_status

Try it

Copy these to start.

Use these prompts to test your connection.

Starting points

Replace the device names with the actual names used in your SmartThings app.

SmartThings Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_AsgejFrsXUVD0iEKFv6nVKwnhOqJpHAmdpEyTy0v/mcp

Claude Desktop

Follow the steps below to connect in seconds.

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — SmartThings capabilities are ready to use.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "smartthings-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_AsgejFrsXUVD0iEKFv6nVKwnhOqJpHAmdpEyTy0v/mcp"
    }
  }
}
Copy into chat04

  • Turn off the living room floor lamp.

  • What is the current status of the front door lock?

  • Set the bedroom light brightness to 50%.

  • List all the devices connected to my SmartThings account.

  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

Start here

Connect SmartThings once, then ask.

Click the link to authorize the connection. Your credentials stay encrypted, and you can start chatting with your home immediately.

Connect SmartThings to your AI

FAQ

How the SmartThings control works

  • 01

    Can my AI create new smart home automations?

    No. The AI can only execute commands on existing devices; it cannot write or save new automation rules to your SmartThings account.

  • 02

    Can the AI delete my devices?

    No. The AI only has permission to list, check status, and send commands. It cannot remove hardware from your account.

  • 03

    Does this work with any smart brand?

    It works with any device that is already integrated into your SmartThings ecosystem.

  • 04

    Can I use this with Claude or Cursor?

    Yes, any MCP-compatible client will work once you connect the SmartThings MCP.

  • 05

    Can the AI see my camera feeds?

    No. The current tools only allow for device commands and status checks, not video streaming.

  • More questions about SmartThings? The Connector page answers them. See everything the SmartThings Connector can do

Connect SmartThings to Claude, Cursor, ChatGPT & more