• LIVE DATA
  • FLEET MAP
  • GARAGE STATUS
  • HUMAN TASK

How to monitor live bus positions with your AI

Connect the SPTrans Olho Vivo MCP to your AI client. Once connected, your agent can pull live GPS data and fleet locations on demand.

Ask AI about this page

Short answer

How can I track live buses using my AI?

Your AI uses the SPTrans Olho Vivo MCP to fetch real-time GPS coordinates for specific lines or the entire fleet. You get precise location data and garage distribution through direct chat commands. This breakdown shows how your agent handles the data.

The outcomes.

Where the data lands.

Your AI processes the raw SPTrans feed into these specific outcomes.

LIVE DATA

Real-time tracking

The AI pulls current coordinates for any active bus. You get exact locations for specific lines or the whole city.

FLEET MAP

Distribution analysis

Your agent calculates where buses are concentrated. It identifies which areas have high or low vehicle density.

GARAGE STATUS

Depot monitoring

The AI checks which vehicles are currently parked in garages. This helps you see fleet availability at a glance.

HUMAN TASK

Manual route planning

The AI provides the raw location data, but you must decide how to adjust physical routes or schedules based on those positions.

The workflow

What your AI does when the request arrives.

The AI acts as the bridge between your chat and the SPTrans live feed.

  1. Locate specific lines

    When you ask about a specific route, the AI finds every active vehicle on that line.

    get_positions_by_line

  2. Scan the whole city

    The AI pulls a complete snapshot of every active bus currently moving in the network.

    get_all_positions

  3. Check depot inventory

    The AI identifies which buses are sitting in the garages rather than on the street.

    get_positions_in_garage

  4. Summarize movement

    The AI organizes the raw GPS data into a readable summary of where the fleet is concentrated.

    get_all_positions

Try it

Copy these to start.

Use these prompts to begin interacting with the SPTrans data.

Starting points

These are starting points. Swap out the line numbers or garage names for the ones you actually need.

SPTrans Olho Vivo Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_7LC2d2RPTETrnyDTnxvd3pgzd3WkYlgNn47fk8kn/mcp

Claude Desktop

Follow the steps below to connect in seconds.

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — SPTrans Olho Vivo capabilities are ready to use.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "sptrans-olho-vivo-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_7LC2d2RPTETrnyDTnxvd3pgzd3WkYlgNn47fk8kn/mcp"
    }
  }
}
Copy into chat04

  • Where are the buses currently located on line 8000?

  • Show me the GPS coordinates for all active buses in the city.

  • Which buses are currently in the garage right now?

  • Give me a summary of the fleet distribution across all active lines.

  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

Start here

Connect SPTrans Olho Vivo once, then ask.

One click connects the MCP to your client. Your credentials stay encrypted, and you can start asking questions immediately.

Connect SPTrans Olho Vivo to your AI

FAQ

How the task behaves.

  • 01

    Can the AI change bus routes?

    No. The AI only reads live position data; it cannot send commands to drivers or modify official transit schedules.

  • 02

    Does the AI track individual passengers?

    No. The tools only provide GPS data for the vehicles themselves.

  • 03

    How often does the position data update?

    The AI pulls the most recent data available from the SPTrans feed at the moment you ask the question.

  • 04

    Can I see the history of where a bus was yesterday?

    No. The current tools only provide live, real-time positions.

  • 05

    Can the AI delete data from the SPTrans system?

    No. The AI has read-only access to the position data.

  • More questions about SPTrans Olho Vivo? The Connector page answers them. See everything the SPTrans Olho Vivo Connector can do

Connect SPTrans Olho Vivo to Claude, Cursor, ChatGPT & more