- SURFACE
- MOVEMENT
- LOCATION
- DECISION
Short answer
How can I get marine weather data using my AI?
Give your AI a set of coordinates and ask for specific ocean metrics like wave height or water temperature. Your agent uses the connector to fetch this data directly from Storm Glass. You'll get specific readings for the exact spot you're interested in.
Data outcomes
What you'll receive
The specific ocean metrics your agent pulls from the connector.
SURFACE
Water temperature readings
The AI pulls current water temperatures for your coordinates. This helps you gauge thermal conditions for diving or fishing.
MOVEMENT
Wave and swell data
Get specific details on wave height and swell direction. Your agent translates these raw numbers into a clear summary of the sea state.
LOCATION
Coordinate-based reports
The AI fetches data for any latitude and longitude you provide. It maps the weather specifically to your target area.
DECISION
Human safety check
The AI provides the raw data, but you decide if conditions are safe for your boat or activity. It doesn't make safety calls for you.
The workflow
What your AI does when the request arrives.
The AI handles the data retrieval so you don't have to hunt through weather maps.
Locate coordinates
Your agent identifies the exact latitude and longitude from your natural language request.
get_marine_weatherFetch ocean metrics
The AI calls the connector to pull wave, swell, and temperature data for that spot.
get_marine_weatherParse weather data
The agent cleans up the raw marine data into a readable format.
get_marine_weatherSummarize conditions
Your AI presents the final sea state report in plain English.
get_marine_weather
Try it
Copy these to start.
Use these prompts to trigger the marine weather tool.
Starting points
Replace the bracketed locations with your actual coordinates or specific coastal areas.
Storm Glass Connector
You're all set. Choose your MCP client and follow the setup instructions.
https://edge.vinkius.com/vk_preview_qmfKShmcA0LrJkJsAAld34BJZKtZ3aVELK9mW9sI/mcpClaude Desktop
Follow the steps below to connect in seconds.
- 1In Claude Desktop, open Settings → Connectors.
- 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
- 3Click Add and start a new chat — Storm Glass capabilities are ready to use.
{
"mcpServers": {
"storm-glass-marine-weather-mcp": {
"url": "https://edge.vinkius.com/vk_preview_qmfKShmcA0LrJkJsAAld34BJZKtZ3aVELK9mW9sI/mcp"
}
}
}Get the wave height and swell direction for 34.05, -118.24.
What is the water temperature at these coordinates: 40.71, -74.00?
Check the marine weather for the Gulf of Mexico near 25.0, -90.0.
Give me a summary of the swell conditions for the coast of Maine.
Claude
ChatGPT
Cursor
VS Code
Windsurf
Claude Code
JetBrains
Cline
Start here
Connect Storm Glass Marine & Weather once, then ask.
One click connects the MCP to your client. Your credentials stay encrypted and secure on our side.
Connect Storm Glass Marine & Weather to your AIFAQ
How this task behaves
- 01
Can the AI predict future storms?
No. The tool retrieves current marine weather data based on the coordinates you provide.
- 02
Can the AI book a boat based on these conditions?
No. The AI only provides the weather data. You must handle all bookings and safety decisions yourself.
- 03
Do I need to provide latitude and longitude?
Yes, providing specific coordinates ensures the most accurate data retrieval for your exact location.
- 04
Can the AI change the weather data?
No. The AI only reads data from the Storm Glass service; it cannot modify or influence any weather information.
- 05
Does the AI provide visual weather maps?
No. The AI provides text-based summaries and specific data points like temperature and wave height.
More questions about Storm Glass Marine & Weather? The Connector page answers them. See everything the Storm Glass Marine & Weather Connector can do
Connect Storm Glass to Claude, Cursor, ChatGPT & more
