Verbinden Sie AT&T IoT mit ChatGPT, Claude und Gemini

• 01 / 03SIMs verwalten
• 02 / 03IoT-Datenverbrauch überwachen
• 03 / 03Offline IoT-Geräte diagnostizieren

Schnellster Tag

749ms

Langsamster Tag

1062ms

14-Tage-Trend

Verlangsamend+5%

AT&T IoT Connector

Alles bereit. Wählen Sie Ihren MCP-Client und folgen Sie den Einrichtungsschritten.

Connector-Linkhttps://edge.vinkius.com/vk_preview_YFstwCIlx1nPc9O3GzBKiwQJk2qplbw9H9PNBDuZ/mcpKopieren

Claude Desktop

Folgen Sie den Schritten unten, um sich in Sekunden zu verbinden.

1. 1In Claude Desktop, open Settings → Connectors.
2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
3. 3Click Add and start a new chat — AT&T IoT capabilities are ready to use.

Konfiguration · claude_desktop_config.jsonKopieren

{
  "mcpServers": {
    "att-iot-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_YFstwCIlx1nPc9O3GzBKiwQJk2qplbw9H9PNBDuZ/mcp"
    }
  }
}

• Claude
• ChatGPT
• Cursor
• VS Code
• Windsurf
• Claude Code
• JetBrains
• Cline

Schritt-für-Schritt-Anleitungen für jeden Client finden Sie im Guide. Verbinden

Geführte Einrichtung für Claude? AT&T IoT in Claude und anderen KI-Tools einrichten

Alle KI-Clients ansehen, mit denen dieser Connector funktioniert ↑

• 01

  IoT Flottenmanager

  Überwachen Sie den Gerätezustand im großen Maßstab, verfolgen Sie den Verbrauch von Datenpools und verhindern Sie SIM-Erschöpfung, bevor sie auftritt.

• 02

  Feldtechniker

  Diagnostizieren Sie Offline-Geräte aus der Ferne, aktivieren Sie neue Bereitstellungen und suspendieren Sie verlorene oder gestohlene SIMs sofort.

• 03

  Netzwerkbetrieb

  Beheben Sie Konnektivitätsprobleme mit automatisierten Diagnosen, überprüfen Sie APN-Konfigurationen und prüfen Sie bekannte Ausfälle.

• 04

  Finanzabteilung

  Auditieren Sie den Datenverbrauch über die gesamte Flotte, prognostizieren Sie Abrechnungszyklen und reallokieren Sie ungenutzte Poolkapazitäten zur Kostensenkung.

• 01

  Does this MCP work with all AI clients?

  Yes. You connect this MCP using any AI client that supports the Model Context Protocol (MCP). This means you can use your existing setup in Claude, Cursor, Windsurf, or VS Code.

• 02

  What kind of data can I get about my devices?

  You can get real-time connectivity status, including signal strength and IP addresses. You can also retrieve historical data usage, daily breakdowns, and current data allowance for any SIM.

• 03

  Can I manage data pools with this MCP?

  Absolutely. You can list all shared data pools, monitor aggregate consumption, and identify the top-consuming devices to prevent the pool from running dry.

• 04

  Is this for technical people only?

  No. While the underlying capabilities are technical, the MCP lets you manage the entire process using natural conversation. You don't need to know the API calls; you just need to know what you want to achieve.

• 05

  What if I need to change a device's settings?

  You can update configuration settings like rate limits or APN settings using the MCP. This is useful for optimizing performance or moving devices between different data plans.

• 06

  What information do I need to identify an IoT SIM?

  Each IoT SIM is uniquely identified by its ICCID (Integrated Circuit Card Identifier) -- a 19-20 digit number printed on the SIM card or available in your IoT Control Center dashboard. The ICCID is required for all device-specific operations like activation, suspension, and usage queries. You can list all your devices with list_devices to discover ICCIDs for your entire fleet.

• 07

  How do data pools work and how can I prevent pool exhaustion?

  Data pools are shared data plans across multiple IoT SIMs. Instead of each SIM having an individual cap, all devices in the pool draw from a common data bucket. Use list_data_pools to see your pools, get_pool_usage to check consumption and identify top-consuming devices, and set up alerts before reaching the limit. If a pool is near exhaustion, you can suspend low-priority devices with suspend_device or migrate high-usage devices to a different pool with update_device_settings.

• 08

  Can I automatically diagnose why an IoT device went offline?

  Yes. Use the diagnose_connectivity capability with the device's ICCID. It runs automated checks for network registration status, APN configuration, active data session, signal strength, and known network outages in the device's area. The capability returns detailed diagnostic results with recommended actions -- helping your field engineers resolve connectivity issues without manual portal navigation.

• 

  Hologram.io KI-Connector

  Automate IoT connectivity via Hologram.io — manage devices, SIM cards, and data usage directly from any AI age

  Ansehen
• 

  Balena KI-Connector

  Manage IoT fleets and edge devices via Balena — list devices, manage environment variables, and track releases

  Ansehen
• 

  Data Pipeline Prover KI-Connector

  A data team asked an AI to build an ETL pipeline. No schema contract. No idempotency. No freshness SLA. The pi

  Ansehen
• 

  data.world KI-Connector

  Equip your AI agent to discover and manage data assets, projects, and queries directly via the data.world API.

  Ansehen

Vorschläge

• 

  Hevo Data (ETL & Data Pipeline) KI-Connector

  Manage data pipelines via Hevo — list pipelines, monitor destinations, and track usage.

  Ansehen
• 

  AWS IoT Core Device & Limits Calculator KI-Connector

  Calculate AWS IoT Core messaging throughput, device scale, and resource limits.

  Ansehen
• 

  Home Network Device Inventory KI-Connector

  Organize and monitor all connected devices on your home network.

  Ansehen
• 

  Data.gov Catalog KI-Connector

  Access the official US Government open data catalog. Search thousands of datasets, organizations, and spatial

  Ansehen