Claude and other AIs

How to set up Amazon SNS Topic in Claude and other AIs

Set up in seconds, once. From then on, Amazon SNS Topic answers in Claude, in ChatGPT, in Gemini — in every AI you use: the same link, the same governance, nothing to rebuild.

Ask AI about this guide

Step by step, for each client

Connecting Amazon SNS Topic in each client

The same hosted link plugs into every client below. Pick the one you use — each setup takes seconds — and start a new chat.

Claude

Amazon SNS Topic Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp

Connecting Amazon SNS Topic to Claude

About a minute, right in your Claude settings

  1. 1In Claude, open Customize and choose Connectors (claude.ai or the desktop app).
  2. 2Click +, choose Add custom connector, and paste your Amazon SNS Topic link as the remote MCP server URL.
  3. 3Click Add and start a new chat. Ask for something real: Amazon SNS Topic is now part of your Claude.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "amazon-sns-topic-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp"
    }
  }
}

ChatGPT

Amazon SNS Topic Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp

Connecting Amazon SNS Topic to ChatGPT

About a minute, right in your ChatGPT settings

  1. 1In ChatGPT, open Settings, choose Apps & Connectors, and turn on Developer mode under Advanced settings.
  2. 2Click Create, name it, and paste your Amazon SNS Topic link as the MCP server URL. Choose No authentication and check “I trust this application”.
  3. 3Create it, start a new chat, and switch the connector on via the + menu. Ask for something real: Amazon SNS Topic is now part of your ChatGPT.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "amazon-sns-topic-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp"
    }
  }
}

Gemini

Amazon SNS Topic Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp

Connecting Amazon SNS Topic to Gemini

About a minute, right in your terminal

  1. 1Open the Gemini CLI in your terminal.
  2. 2Run: gemini mcp add --transport http Amazon SNS Topic <your link>. Your Amazon SNS Topic link above is the HTTP URL.
  3. 3Run /mcp and confirm the status shows CONNECTED. Amazon SNS Topic is now part of your Gemini.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "amazon-sns-topic-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp"
    }
  }
}

Perplexity

Amazon SNS Topic Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp

Connecting Amazon SNS Topic to Perplexity

A few minutes, in the Perplexity Mac app

  1. 1In the Perplexity Mac app, open Account, choose Connectors, and click Add Connector.
  2. 2In the Simple tab, choose MCP Connector, name it, and add the bridge command with your Amazon SNS Topic link: npx mcp-remote <your link>. The link above is the URL.
  3. 3Click Save and check it shows Running, then turn the connector on under Sources on the homepage. Amazon SNS Topic is now part of your Perplexity.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "amazon-sns-topic-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp"
    }
  }
}

Grok

Amazon SNS Topic Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp

Connecting Amazon SNS Topic to Grok

About a minute, at grok.com/connectors

  1. 1In Grok, open grok.com/connectors and click New Connector.
  2. 2Choose Custom, name it, and paste your Amazon SNS Topic link as the remote MCP server URL.
  3. 3Save and enable it, finish the browser authorization if prompted, and ask Grok something real. Amazon SNS Topic is now part of your Grok.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "amazon-sns-topic-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp"
    }
  }
}

Microsoft Copilot

Amazon SNS Topic Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp

Connecting Amazon SNS Topic to Copilot

About a minute, in VS Code's Copilot Chat

  1. 1In VS Code, open the Copilot Chat panel, click the tools icon and select the + icon, or run MCP: Add Server from the Command Palette.
  2. 2Choose your scope, name the server, and paste your Amazon SNS Topic link as the server URL with HTTP transport.
  3. 3Confirm the server appears in your MCP list, then ask Copilot something real. Amazon SNS Topic is now part of your Copilot.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "amazon-sns-topic-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp"
    }
  }
}

Cursor

Amazon SNS Topic Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp

Connecting Amazon SNS Topic to Cursor

About a minute, in Cursor

  1. 1Open Customize in the Cursor sidebar (or create .cursor/mcp.json in your project).
  2. 2Add an MCP server named Amazon SNS Topic with the url field set to your link. The link above is the URL.
  3. 3Save, enable the server, and ask something real. Amazon SNS Topic is now part of Cursor.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "amazon-sns-topic-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp"
    }
  }
}

VS Code

Amazon SNS Topic Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp

Connecting Amazon SNS Topic to VS Code

About a minute, in VS Code

  1. 1Run MCP: Add Server from the Command Palette (or create .vscode/mcp.json in your project).
  2. 2Add a server named Amazon SNS Topic with type http and your link as the url. The link above is the URL.
  3. 3Save and ask something real in Copilot Chat. Amazon SNS Topic is now part of VS Code.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "amazon-sns-topic-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp"
    }
  }
}

Windsurf

Amazon SNS Topic Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp

Connecting Amazon SNS Topic to Windsurf

About a minute, in Cascade

  1. 1In Cascade, click the MCPs icon (or go to Settings, Cascade, MCP Servers).
  2. 2Edit mcp_config.json and add Amazon SNS Topic with the serverUrl field set to your link. The link above is the URL.
  3. 3Save and ask something real. Amazon SNS Topic is now part of Windsurf.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "amazon-sns-topic-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp"
    }
  }
}

JetBrains

Amazon SNS Topic Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp

Connecting Amazon SNS Topic to JetBrains

About a minute, in Settings

  1. 1Go to Settings, Tools, AI Assistant, Model Context Protocol (MCP).
  2. 2Click Add and add Amazon SNS Topic with the url field set to your link. The link above is the URL.
  3. 3Click OK and Apply, check the Status column, and ask something real. Amazon SNS Topic is now part of your IDE.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "amazon-sns-topic-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp"
    }
  }
}

Cline

Amazon SNS Topic Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp

Connecting Amazon SNS Topic to Cline

About a minute, in the Cline panel

  1. 1In the Cline panel, click the MCP Servers icon and open the Remote Servers tab.
  2. 2Add a server named Amazon SNS Topic with your link as the Server URL and Streamable HTTP as the transport. The link above is the URL.
  3. 3Click Add Server and ask something real. Amazon SNS Topic is now part of Cline.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "amazon-sns-topic-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp"
    }
  }
}

LangChain

Amazon SNS Topic Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp

Connecting Amazon SNS Topic to LangChain

About a minute, in your code

  1. 1Install LangChain with the mcp extra: pip install "langchain[mcp]".
  2. 2Create an MCPAdapter with your Amazon SNS Topic link: MCPAdapter("<your link>"). The link above is the URL.
  3. 3Call list_tools and pass the tools to your agent. Amazon SNS Topic is now part of your LangChain agent.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "amazon-sns-topic-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp"
    }
  }
}

Vercel AI SDK

Amazon SNS Topic Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp

Connecting Amazon SNS Topic to the Vercel AI SDK

About a minute, in your code

  1. 1Install the MCP client: npm install @ai-sdk/mcp, and import createMCPClient from '@ai-sdk/mcp'.
  2. 2Create the client with your Amazon SNS Topic link as the transport: { type: 'http', url: '<your link>' }. The link above is the URL.
  3. 3Call client.tools() and pass the tools to streamText. Amazon SNS Topic is now part of your AI SDK app.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "amazon-sns-topic-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp"
    }
  }
}

Lovable

Amazon SNS Topic Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp

Connecting Amazon SNS Topic to Lovable

About a minute, in the Connectors catalog

  1. 1Open Connectors, select the + button in the top right of the catalog, and choose MCP server.
  2. 2Name the server and paste your Amazon SNS Topic link as the Server URL. The link above is the URL.
  3. 3Choose No authentication and click Add server, then ask Lovable something real. Amazon SNS Topic is now part of Lovable.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "amazon-sns-topic-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp"
    }
  }
}

Z.ai

Amazon SNS Topic Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp

Connecting Amazon SNS Topic to Z.ai

About a minute, in ZCode settings

  1. 1Open Settings, MCP Servers, then click New MCP Server in the upper-right corner.
  2. 2Choose the User scope, name it, and keep the type as HTTP. Paste your Amazon SNS Topic link as the service URL. The link above is the URL.
  3. 3Click Add and confirm the server is enabled in the list, then ask something real. Amazon SNS Topic is now part of Z.ai.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "amazon-sns-topic-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp"
    }
  }
}

Raycast

Amazon SNS Topic Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp

Connecting Amazon SNS Topic to Raycast

A few minutes, in Raycast Pro

  1. 1Search for the Install MCP Server command (or open Manage MCP Servers and choose Install New Server).
  2. 2Give the server a name and icon, select HTTP as the transport, and paste your Amazon SNS Topic link as the URL. The link above is the URL.
  3. 3Press Install MCP Server and confirm the status shows Running, then ask something real. Amazon SNS Topic is now part of Raycast.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "amazon-sns-topic-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp"
    }
  }
}

Qwen Code

Amazon SNS Topic Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp

Connecting Amazon SNS Topic to Qwen Code

About a minute, in your terminal

  1. 1Run: qwen mcp add --transport http Amazon SNS Topic <your link>. The link above is the URL.
  2. 2Prefer a config file? Add it to ~/.qwen/settings.json (user) or .qwen/settings.json (project) with the httpUrl field. The link above is the URL.
  3. 3Enter /mcp in the chat to confirm the server appears. Amazon SNS Topic is now part of Qwen Code.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "amazon-sns-topic-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp"
    }
  }
}

Kimi Code

Amazon SNS Topic Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp

Connecting Amazon SNS Topic to Kimi Code

About a minute, in the TUI

  1. 1Run /mcp-config in the Kimi Code TUI to add a server interactively (or edit mcp.json directly).
  2. 2Add a server named Amazon SNS Topic with your link in the url field. The link above is the URL.
  3. 3Run /mcp to confirm the status, then ask something real. Amazon SNS Topic is now part of Kimi Code.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "amazon-sns-topic-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp"
    }
  }
}

Le Chat

Amazon SNS Topic Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp

Connecting Amazon SNS Topic to Le Chat

About a minute, in Connectors

  1. 1In Le Chat, open Connectors and choose to add a custom connector.
  2. 2Paste your Amazon SNS Topic link as the remote MCP server URL. The link above is the URL.
  3. 3Save and authorize, then ask something real. Amazon SNS Topic is now part of Le Chat.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "amazon-sns-topic-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp"
    }
  }
}

Claude and other AIs + Amazon SNS Topic

One chat. Your Amazon SNS Topic, live inside Claude and other AIs.

Real prompts, answered with live data. This is the kind of conversation you will have in Claude and other AIs once the link is in.

Waiting for input…

Works with modern AI clients that support MCP, including ChatGPT, Claude, Cursor, and more.

ChatGPTClaudeCursorPerplexityGeminiMicrosoft CopilotRaycastMeta AI

These prompts ship with the Amazon SNS Topic Connector. Once yours is connected, they work in your chats.

The full capability set, the prompts and the observed latency live on the Amazon SNS Topic Connector page.

Mission Control

See everything your agents do in Amazon SNS Topic.

When your agents run a tool in Amazon SNS Topic, it happens on the client side: you see the answer in the chat, but not the request itself, what data it carried, or whether a rule was broken.

Now every move lands on your screen.

Every execution is recorded, enforced, and shown to you: what ran, what it returned, what was blocked, and why.

AI Briefing
Upgrade to unlock

Know exactly what needs your attention before you even look at the charts. One briefing. The full picture. The next move.

Requests
0
Total in this period
Avg Latency
0
API 88ms · Overhead 54ms
Vinkius Reliability
0
Agent 280 · Upstream 47 · Vinkius 15
Tokens
0
AI tokens processed
DLP Protected
0
Sensitive data redacted
Cost Saved
0
FinOps truncations applied

AI Agents Activities

last 30 days
30d agotoday

Request Volume & Latency

requests latency

Every request your agents make through Amazon SNS Topic is logged, enforced and auditable. See how AI Governance turns agent activity into accountability, and what it means for your Amazon SNS Topic workflows.

What sets us apart

It's not just the Connector that stays safe. Everything your agents do through it is.

Connecting Amazon SNS Topic to your AI is step one. But an open line between your agents and Amazon SNS Topic is only half the story: without protection, every action they take runs unguarded.

That's why protection doesn't stop at the door.

Every action your agents take through the Connector runs inside our infrastructure: signed activity logs, automatic key rotation, spending limits that pause instead of surprise, and a sandbox that isolates every execution.

01

Tamper Proof Activity Log

Every request your agents make in Amazon SNS Topic is recorded and signed, so any change to the history becomes detectable.

02

Automatic Key Rotation

We rotate security keys every 24 hours. Your Amazon SNS Topic connection stays protected without any manual work.

03

Spending Protection

We enforce the spending limit you choose and pause actions that exceed it until approval is received. Your Amazon SNS Topic actions never surprise you.

04

Isolated Sandbox

Every execution through Amazon SNS Topic runs isolated, with 34+ security rules covering memory, CPU, network access, file handling and execution.

05

Security Event Streaming

Security events flow to Splunk, Datadog or your own webhook, so Amazon SNS Topic activity lands in the tools you already rely on.

06

Instant Resume

Idle connections resume in 3 to 5 ms while preserving their state, keeping your conversations responsive across every client.

07

Malicious File Protection

We detect compressed files designed to exhaust system resources and block them before they ever reach Amazon SNS Topic.

08

Credential Validation

We test your Amazon SNS Topic credentials before saving them. Invalid credentials are rejected instead of being stored.

09

Separate Usage Limits

Usage stays isolated per account, so activity in one connection never consumes another account's allowance.

One Connector, one link, and the whole operation is protected. Not just the connection: everything your agents do through it.

These guarantees are not add-ons: they are the infrastructure every Amazon SNS Topic connection runs on. Read how our infrastructure protects everything your agents do, end to end.

Inside Vinkius

Get Amazon SNS Topic ready for your AI. It's easy.

You choose Amazon SNS Topic from the Vinkius Catalog, sign in to your Amazon SNS Topic account, and get one connection link. That's it.

  1. You choose Amazon SNS Topic

    You find Amazon SNS Topic in the Catalog and install the Connector with one click.

    Amazon SNS Topic

    Active

    Enable Connector
    Activating…

  2. You sign in

    You connect your Amazon SNS Topic account and choose what you want your AI to access. Your credentials stay encrypted and separate from your AI.

    Configure Credentials

    Configure credentials for {{connectorName}}

    RequiredEncrypted
    Save & Continue

    Encrypted Storage

    Your credentials are encrypted at rest and in transit.

    Never Shared

    Your credentials are never shared with third parties.

    Full Control

    Revoke or update credentials at any time.

  3. You add the link in your AI client

    Vinkius gives you one connection link. Add it to the client you use — the exact steps for each client are in the section above — and Amazon SNS Topic is live everywhere in one move.

    Token generated successfully

    MCP Connection URL

    https://edge.vinkius.com/vk_preview_YtQula19AxGLBqHDF4zmTVPedPMxBjfG7SMwjAJj/mcp

    Connection Token

    vk_live_••••••••
    Go to Dashboard

Set it up once. Use Amazon SNS Topic with the AI you already use.

FAQ

Claude access questions.

  • 01

    Does this work on claude.ai and in the Claude desktop app?

    Yes. You add the same link under Customize and Connectors in both, and your chats work the same in each.

  • 02

    If I connect Amazon SNS Topic to Claude, can I use the same connection in ChatGPT or Gemini later?

    Yes, and that's the point: the connection is yours, not Claude's. You paste the same link in any AI you use, and there's nothing new to set up or pay again. Connect a new AI and Amazon SNS Topic is already there.

  • 03

    Do I need to hand my Amazon SNS Topic password to Claude?

    Never. You sign in once at Vinkius, and we keep your logins encrypted and away from your AI. Claude only ever sees the link, and you can remove it whenever you want.

  • 04

    What can I actually ask Claude to do with Amazon SNS Topic?

    Whatever the Connector covers: check data, run actions and bring answers back into the chat. The Connector page lists every capability your AI gains, with real examples you can copy.

  • 05

    Claude doesn't show the Connector. What do I check?

    Make sure the link was pasted exactly as copied and that the Connector is active in your Vinkius account, then reopen the connectors list in Claude. A deactivated Connector stops appearing in new chats.

  • 06

    Can I remove the access later?

    Anytime. Remove the connector under Customize and Connectors in Claude and it's out of your chats. Your Vinkius account keeps the connection and its history either way, ready for the next AI.

  • More questions about Amazon SNS Topic? The Connector page answers them. See everything the Amazon SNS Topic Connector can do

About the Connector

What Amazon SNS Topic adds to your AI.

Once you connect it, your AI can take real actions in Amazon SNS Topic when you ask. The Connector page lists every capability in detail, alongside the latency we measure in production and prompts worth trying first.

See everything the Amazon SNS Topic Connector can do