What kind of data does this MCP need to run?

You must provide site-specific data, including soil permeability, water table levels, and the depth of the basement. The MCP uses this information to analyze hydrostatic pressure.

Does it tell me if I need a tanking or drainage system?

Yes. The 'analyze_waterproofing_strategy' capability determines if the design should follow a tanking, drainage, or hybrid approach based on your input parameters.

Is the structural integrity check included?

Absolutely. The MCP runs a check to verify that the proposed design meets required safety factors against hydrostatic loads.

Can I find out what membrane to use?

The 'design_membrane_system' capability specifies the appropriate membrane type and material properties, accounting for chemical exposure.

What is the output of the drainage calculation?

The output includes the required drainage layer thickness, along with the necessary sump capacity and pump flow rate.

How do I decide between tanking and drainage?

You should use the analyze_waterproofing_strategy capability. It evaluates soil permeability and water table levels to recommend a tanking (barrier) or drainage (relief) approach.

Can this capability verify if my concrete is strong enough?

Yes, the evaluate_structural_integrity capability calculates the safety factor by comparing the applied hydrostatic load against the specified concrete grade.

What information is needed for drainage calculations?

To use calculate_drainage_specs, you need to provide the soil permeability, basement depth, water table level, and the chosen strategy type.

An astronaut overseeing a futuristic data hub

Download PDF Markdown Version

Connect Basement Waterproofing Designer to your AI

Set it up once and it works in ChatGPT, Claude, Cursor, and any other client you love. It all runs safely in the background, so you can relax and focus on what really matters. Engineered solutions for critical underground structures.

Ask AI about this Connector

Developed, maintained, and hosted by Vinkius.

MCP VERIFIED · PRODUCTION READY · VINKIUS GUARANTEED

Waiting for input…

Works with modern AI clients that support MCP, including ChatGPT, Claude, Cursor, and more.

Your AI does the work. We keep it safe and sound.

No other AI tool gives you this. Your workflow runs in the client you already love, your account stays protected, and you decide what the agent can and cannot do. It is the whole reason to make the switch.

Each Connector lives inside our infrastructure, the same place where your workflow runs. The three things below are already part of it, working quietly in the background so you never have to think about them. Nothing to add, nothing to set up, nothing to worry about.

V8 Isolate01

Each Connector runs inside its own sealed environment.

Each Connector runs inside its own sealed V8 runtime — no access to your files, your system, or other servers. A Connector never sees past its own request.

Kill Switch02

One switch stops every agent. Instantly.

One action deactivates every Connector, revokes every token, and ends every session at once. AI Governance keeps the record.

FinOps per User03

Spending limits that pause instead of surprise.

Every user keeps their own connections and credentials, isolated from everyone else. Anything that would cross your spending limit is held for your approval, not billed.

Three controls, built into the layer your AI connects through.

Curated set · 4 capabilities

We ship only the actions that matter.

Capability set01 / 01

01-04

4 capabilities in this set.

Part of 4 available through Basement Waterproofing Design.

01
Calculate drainage specs
Designs the physical drainage layer and sump components
02
Design membrane system
Specifies the appropriate membrane type and material properties
03
Evaluate structural integrity
Checks if the proposed design meets safety standards
04
Analyze waterproofing strategy
Determines whether the design should follow a tanking, drainage, or hybrid approach

Real work

What teams actually run

High Water Table Sites

When the water table is close to the excavation floor, the MCP analyzes the pressure and recommends a hybrid or tanking system.

Chemical Exposure Basements

For concrete exposed to aggressive chemicals, the capability specifies industrial-grade membranes that provide necessary chemical resistance.

Deep Excavation Projects

If the basement is deep, the capability calculates the necessary drainage layer thickness and sump capacity to manage high hydrostatic pressure.

Structural Overhaul

Before rebuilding, you can run the design through the MCP to verify that the proposed waterproofing system maintains structural integrity.

One connector, every AI

Basement Waterproofing Design works with the most popular AI clients.

These are the most popular clients, each with a step-by-step guide: one link, set up once, with governance and visibility built in. And because everything runs on the MCP standard, the same connection also works in any other compatible client — nothing to rebuild.

Building your own app? The connector is yours to use.

You don't need a client to put Basement Waterproofing Design to work: the same hosted connection plugs into your own applications and agent code, with the same governance on every request. Build with it, chat with it — one connection for both.

Observed, not estimated

909ms average. Fast in production.

Basement Waterproofing Design is checked daily against the live service.

Daily averagePeak 1220ms

Oct 3Today

Fastest day: 792ms
Slowest day: 1220ms
14-day trend: Slowing+26%

Connect your client

One URL. Every client.

Activate the Connector, copy your link, and paste it into the client you already use. 4 capabilities arrive ready to run.

Preview access · not provider authentication

The vk_preview_* token belongs to Vinkius preview infrastructure. It lets Claude discover and display the capabilities of Basement Waterproofing Design, so you can see the experience inside your AI.

It does not authenticate your account with Basement Waterproofing Design. Actions requiring credentials or live account data may not run until you activate the Connector and authorize the service.

Basement Waterproofing Design Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_9R8PXQqIk1ToeNs5Llr5cNczCTal8jm9cPN7dSIk/mcp

Claude Desktop

Follow the steps below to connect in seconds.

1In Claude Desktop, open Settings → Connectors.
2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
3Click Add and start a new chat — Basement Waterproofing Design capabilities are ready to use.

Configuration · claude_desktop_config.jsonCopy

{
  "mcpServers": {
    "basement-waterproofing-designer-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_9R8PXQqIk1ToeNs5Llr5cNczCTal8jm9cPN7dSIk/mcp"
    }
  }
}

Claude
ChatGPT
Cursor
VS Code
Windsurf
Claude Code
JetBrains
Cline

Step-by-step instructions for each client are in the guide. How to connect

Guided setup for Claude? Set up Basement Waterproofing Design in Claude and other AIs

See all the AI clients this connector works with ↑

Who it's for

Built for the work Basement Waterproofing Design owners hand off.

Engineers, architects, and civil construction managers use this MCP when designing underground structures. It takes complex site data—like soil reports and water table readings—and translates it into actionable, safe engineering specifications. You hand off the raw data, and your AI client gets a complete, vetted waterproofing plan.

01
Civil Engineer
Needs to analyze hydrostatic pressure and determine the optimal waterproofing strategy for deep excavations.
02
Architect
Requires material specifications for membranes that resist specific chemical exposures in the basement.
03
Construction Manager
Uses the capability to calculate precise drainage layer requirements and verify structural safety factors before construction begins.

FAQ

Questions Basement Waterproofing Design owners ask.

01
What kind of data does this MCP need to run?
You must provide site-specific data, including soil permeability, water table levels, and the depth of the basement. The MCP uses this information to analyze hydrostatic pressure.
02
Does it tell me if I need a tanking or drainage system?
Yes. The 'analyze_waterproofing_strategy' capability determines if the design should follow a tanking, drainage, or hybrid approach based on your input parameters.
03
Is the structural integrity check included?
Absolutely. The MCP runs a check to verify that the proposed design meets required safety factors against hydrostatic loads.
04
Can I find out what membrane to use?
The 'design_membrane_system' capability specifies the appropriate membrane type and material properties, accounting for chemical exposure.
05
What is the output of the drainage calculation?
The output includes the required drainage layer thickness, along with the necessary sump capacity and pump flow rate.
06
How do I decide between tanking and drainage?
You should use the analyze_waterproofing_strategy capability. It evaluates soil permeability and water table levels to recommend a tanking (barrier) or drainage (relief) approach.
07
Can this capability verify if my concrete is strong enough?
Yes, the evaluate_structural_integrity capability calculates the safety factor by comparing the applied hydrostatic load against the specified concrete grade.
08
What information is needed for drainage calculations?
To use calculate_drainage_specs, you need to provide the soil permeability, basement depth, water table level, and the chosen strategy type.

Explore

More in Construction

Connect Basement Waterproofing Design to Claude, Cursor, ChatGPT & more

Your AI does the work. We keep it safe and sound.

Each Connector runs inside its own sealed environment.

One switch stops every agent. Instantly.

Spending limits that pause instead of surprise.

We ship only the actions that matter.

01-04

Calculate drainage specs

Design membrane system

Evaluate structural integrity

Analyze waterproofing strategy

What teams actually run

High Water Table Sites

Chemical Exposure Basements

Deep Excavation Projects

Structural Overhaul

Building your own app? The connector is yours to use.

Basement Waterproofing Design Connector

Claude Desktop

Civil Engineer

Architect

Construction Manager

What kind of data does this MCP need to run?

Does it tell me if I need a tanking or drainage system?

Is the structural integrity check included?

Can I find out what membrane to use?

What is the output of the drainage calculation?

How do I decide between tanking and drainage?

Can this capability verify if my concrete is strong enough?

What information is needed for drainage calculations?

Vessel Design Calculator AI Connector

Methane Drainage System Design AI Connector

Concrete Biaxial Bending Designer AI Connector

Mine Site Drainage Design AI Connector

Suggestions

Kite Bladder Pressure Safety Engine AI Connector

Pixso AI Connector

Refinery Safety Instrumented Systems (SIS) Designer AI Connector

Design Pickle AI Connector