• DATA
  • MODEL
  • STATUS
  • HUMAN

How to calculate wind energy yield with your AI

Connect DNV Renewables to your AI client to turn wind resource data and turbine specs into energy yield estimates.

Ask AI about this page

Short answer

How do I calculate wind energy yield with my AI?

Your AI pulls wind resource data and applies your turbine parameters to estimate annual energy production. You'll get specific yield numbers based on the site coordinates you provide. This breakdown shows you how the data moves from the source to your final estimate.

The results you get

What your AI produces

The AI handles the heavy lifting of data retrieval and math.

DATA

Wind resource profiles

The AI pulls the specific wind data for your target coordinates. You get the environmental inputs needed for the model.

MODEL

Energy yield estimates

The AI combines wind data with your turbine specs to calculate annual energy production.

STATUS

Data availability

The AI checks if the necessary wind data exists for your site before it starts any calculations.

HUMAN

Technical validation

You take the AI's calculated estimates and perform the final manual review or site inspection.

The workflow

What your AI does when the request arrives.

The AI manages the data pipeline so you can focus on the analysis.

  1. Check site availability

    The AI confirms if the wind data for your specific location is available in the DNV database.

    check_data_availability

  2. Retrieve wind data

    Once confirmed, the AI pulls the relevant wind resource data for your coordinates.

    get_wind_resource_data

  3. Calculate yield

    The AI applies your turbine parameters to the wind data to generate the energy yield estimate.

    get_energy_yield_estimate

  4. Finalize estimate

    The AI provides the final annual energy production numbers based on the completed model run.

    get_energy_yield_estimate

Try it

Copy these to start.

Use these prompts to trigger the calculation process.

Starting points

Replace the coordinates and turbine details with your own specific site data.

DNV Renewables Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_1S7iNaVmvdQWRYqtMBYxWuh3RgJDIc20UY3PBzCe/mcp

Claude Desktop

Follow the steps below to connect in seconds.

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — DNV Renewables capabilities are ready to use.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "dnv-renewables-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_1S7iNaVmvdQWRYqtMBYxWuh3RgJDIc20UY3PBzCe/mcp"
    }
  }
}
Copy into chat04

  • Check if there is wind data available for the coordinates 54.5, 7.2.

  • Get the wind resource data for the offshore site at 55.1, 4.3.

  • Calculate the energy yield for a 3MW turbine at the site located at 52.5, 13.4.

  • Using the wind data for the North Sea site, estimate the annual energy production for my specific turbine parameters.

  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

Start here

Connect DNV Renewables once, then ask.

One connection gives your AI access to the DNV data tools. You can find the full list of capabilities on the Connector page.

Connect DNV Renewables to your AI

FAQ

How this task behaves

  • 01

    Can the AI change my turbine parameters?

    No. The AI only uses the parameters you provide to run the calculation.

  • 02

    Does the AI automatically order wind data?

    No. The AI can only retrieve data that is already available in the DNV system.

  • 03

    Can the AI perform a full site feasibility study?

    No. The AI is limited to calculating energy yield using the provided tools.

  • 04

    What happens if the wind data is missing?

    The AI will use the availability tool to tell you the data is unavailable and stop the process.

  • 05

    Does the AI save my turbine specifications?

    No. The AI uses the parameters you provide in the chat to run the calculation and does not store them.

  • More questions about DNV Renewables? The Connector page answers them. See everything the DNV Renewables Connector can do

Connect DNV Renewables to Claude, Cursor, ChatGPT & more