Can the AI tell me exactly where to mount the extinguishers on my wall?

No. The AI calculates the number and types needed based on area and risk, but you must determine the physical mounting locations yourself.

Does the AI handle the actual purchase of the equipment?

No. The AI provides the list of what you need, but it cannot place orders or interact with your purchasing software.

What information do I need to provide?

You need to provide the usable area in square feet and the specific risk class of the space.

Can the AI replace a professional fire safety inspection?

No. This tool is for planning and estimation. You should always have a certified professional verify your final safety plan.

Will the AI update my requirements if I change my floor plan?

Yes, if you provide the new area measurements and risk details, the AI will recalculate the requirements based on the new data.

EQUIPMENTTYPESPLACEMENTHUMAN

EQUIPMENT
TYPES
PLACEMENT
HUMAN

How to determine fire extinguisher requirements with your AI

Connect your AI to the Fire Safety Calculator to turn floor plans and risk assessments into a precise equipment list.

Ask AI about this page

Short answer

How do I know how many fire extinguishers I need?

Tell your AI the total usable area of your space and the specific risk class of the environment. It will calculate the exact number and types of extinguishers required to meet safety standards. You'll get a specific breakdown of equipment types and placement counts.

The results you get

Your calculated safety requirements

Once you provide your space details, your AI generates these specific results.

EQUIPMENT

Exact extinguisher counts

The AI uses specify_extinguisher_requirement to determine how many units you need. You get a hard number for your procurement list.

TYPES

Specific extinguisher types

The tool identifies whether you need water, CO2, powder, or foam based on your risk class. This ensures you buy the right gear for the hazard.

PLACEMENT

Coverage mapping

The AI calculates how to spread the units across your usable area. This helps you plan where to mount them to meet safety codes.

HUMAN

Final safety verification

The AI provides the math, but you must physically walk the space. You need to confirm that obstructions or layout changes don't interfere with the calculated coverage.

The workflow

What your AI does when the data arrives.

The AI handles the math and the regulatory logic so you don't have to look up safety tables manually.

Analyze space data
Your AI reads the square footage and the hazard level you provide. It interprets these as inputs for the safety calculation.
specify_extinguisher_requirement
Calculate requirements
The AI runs the specific math required to match your area to the correct fire class. It determines the quantity of units needed.
specify_extinguisher_requirement
Identify extinguisher types
The AI selects the correct agent, like CO2 or dry powder, for each specific risk zone. This prevents using the wrong tool on a fire.
specify_extinguisher_requirement
Generate equipment list
The AI compiles the final count and types into a clear summary. You can then use this list for ordering or inspections.
specify_extinguisher_requirement

Try it

Copy these to start.

Use these prompts to trigger the calculation immediately.

Starting points

Replace the bracketed info with your actual building details.

Fire Safety Calculator API Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_pXyNkRCngBcaE48MLuPIOYbB5AEi6KDFFmLEsTMJ/mcp

Claude Desktop

Follow the steps below to connect in seconds.

1In Claude Desktop, open Settings → Connectors.
2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
3Click Add and start a new chat — Fire Safety Calculator API capabilities are ready to use.

Configuration · claude_desktop_config.jsonCopy

{
  "mcpServers": {
    "fire-safety-calculator-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_pXyNkRCngBcaE48MLuPIOYbB5AEi6KDFFmLEsTMJ/mcp"
    }
  }
}

Copy into chat04

Calculate my fire extinguisher requirements for a 5,000 sq ft warehouse with a high fire risk class.
How many extinguishers do I need for a 200 sq ft office with a low risk class?
Based on my 1,200 sq ft retail space, what types of extinguishers should I install?
Run a requirement check for a 10,000 sq ft manufacturing plant with Class B hazards.

Claude
ChatGPT
Cursor
VS Code
Windsurf
Claude Code
JetBrains
Cline

Start here

Connect Fire Safety Calculator once, then ask.

Click the link to connect the MCP to your client. Once connected, your AI can immediately start running these calculations.

Connect Fire Safety Calculator to your AI

FAQ

How this task behaves

01
Can the AI tell me exactly where to mount the extinguishers on my wall?
No. The AI calculates the number and types needed based on area and risk, but you must determine the physical mounting locations yourself.
02
Does the AI handle the actual purchase of the equipment?
No. The AI provides the list of what you need, but it cannot place orders or interact with your purchasing software.
03
What information do I need to provide?
You need to provide the usable area in square feet and the specific risk class of the space.
04
Can the AI replace a professional fire safety inspection?
No. This tool is for planning and estimation. You should always have a certified professional verify your final safety plan.
05
Will the AI update my requirements if I change my floor plan?
Yes, if you provide the new area measurements and risk details, the AI will recalculate the requirements based on the new data.
More questions about Fire Safety Calculator? The Connector page answers them. See everything the Fire Safety Calculator Connector can do

Connect Fire Safety Calculator API to Claude, Cursor, ChatGPT & more