• LOGS
  • ALERTS
  • REPORTS
  • HUMAN

How to track iot device locations with your AI

Connect Hologram.io to your AI client to monitor your hardware fleet. Once connected, your agent can pull location data directly from cell tower triangulation.

Ask AI about this page

Short answer

How can I track my IoT device locations using AI?

Your AI uses the get_device_locations tool to pull approximate GPS coordinates via cell tower triangulation. This gives you a real-time view of where your hardware is located without needing dedicated GPS modules on every unit. You'll see how the data maps out below.

Where your data lands.

The outcomes of your request.

The AI processes the raw triangulation data into specific outputs.

LOGS

Location snapshots

The AI pulls the latest coordinates for your fleet. You get a clear list of where every device is currently sitting.

ALERTS

Movement notifications

Your agent compares new coordinates against known locations. It flags any unexpected shifts in your hardware's position.

REPORTS

Fleet summaries

The AI aggregates location history into a single summary. You can ask for a breakdown of all active devices in a specific region.

HUMAN

Manual intervention

The AI identifies devices that are offline or unreachable. You decide when to dispatch a technician or investigate a hardware failure.

The workflow

What your AI does when the request arrives.

The AI handles the heavy lifting of querying the cellular network data.

  1. Fetch coordinates

    Your agent calls the tool to grab the latest triangulation data for your specific device IDs.

    get_device_locations

  2. Analyze movement

    The AI looks at the returned coordinates to determine if a device has moved from its last known spot.

    get_device_locations

  3. Filter by region

    You can ask the agent to only show devices within a certain radius or city.

    get_device_locations

  4. Report status

    The agent summarizes which devices are currently active and where they are clustered.

    get_device_locations

Try it

Copy these to start.

Use these prompts to begin interacting with your hardware data.

Starting points

Replace the bracketed text with your actual device IDs or region names.

Hologram.io Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_3tvd4PLGzrocHfQ4fjJSGdTNixdraz5h7sUdHvSt/mcp

Claude Desktop

Follow the steps below to connect in seconds.

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — Hologram.io capabilities are ready to use.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "hologramio-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_3tvd4PLGzrocHfQ4fjJSGdTNixdraz5h7sUdHvSt/mcp"
    }
  }
}
Copy into chat04

  • Get the current locations for all devices in my fleet.

  • Which devices from my list are currently located in Chicago?

  • Show me the approximate coordinates for device ID 98765.

  • Are any of my devices currently outside of their expected deployment zone?

  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

Start here

Connect Hologom.io once, then ask.

Just follow the link to authorize the connection. Your credentials stay encrypted, and you can immediately start asking your AI about your device locations.

Connect Hologom.io to your AI

FAQ

How this task behaves.

  • 01

    How accurate are these location coordinates?

    The coordinates are approximate because they rely on cell tower triangulation rather than dedicated GPS hardware.

  • 02

    Can the AI move or reposition my devices?

    No. The AI can only read location data; it cannot control or move your hardware.

  • 03

    Does the AI update the device settings?

    No. This specific task is read-only and only retrieves location data.

  • 04

    Can I track devices that are powered off?

    No. If a device is powered off and not communicating with a cell tower, its location cannot be retrieved.

  • 05

    How often can I refresh the location data?

    You can ask for updates as often as you like, but the data is subject to how frequently your devices check in with the network.

  • More questions about Hologom.io? The Connector page answers them. See everything the Hologom.io Connector can do

Connect Hologram.io to Claude, Cursor, ChatGPT & more