• SATELLITE
  • GRID
  • SOLAR
  • HUMAN

How to track geomagnetic storm risks with your AI

Connect to NASA DONKI to feed real-time space weather data directly into your AI client. Once connected, your agent handles the monitoring and risk assessment for you.

Ask AI about this page

Short answer

How can I track geomagnetic storm risks with my AI?

Your AI uses NASA DONKI data to monitor Kp index levels, radiation belts, and solar energetic particles. It identifies patterns in geomagnetic activity to help you predict impacts on satellite operations and power grid stability. You'll see a breakdown of how it processes these specific data streams below.

Risk assessment outcomes

Where risk data lands.

The AI turns raw NASA telemetry into actionable intelligence.

SATELLITE

Orbital risk alerts

The AI checks radiation belt data to identify potential interference with satellite electronics or orbital drag. You get clear warnings about high-risk periods.

GRID

Power grid stability

By monitoring geomagnetic storm intensity, your agent flags potential geomagnetically induced currents. This helps you prepare for grid fluctuations.

SOLAR

Particle activity tracking

The agent tracks solar energetic particles to predict sudden increases in radiation. This provides a heads-up before solar events hit Earth's atmosphere.

HUMAN

Manual verification

The AI provides the data and the risk summary, but you decide when to trigger emergency protocols or hardware shutdowns.

The workflow

What your AI does when the data arrives.

Your agent acts as a continuous monitor for space weather disturbances.

  1. Detect storm activity

    The agent pulls the latest geomagnetic storm data to check for Kp index spikes.

    get_geomagnetic_storms

  2. Assess radiation levels

    It scans the radiation belt status to see if satellite hardware is at risk.

    get_radiation_belt

  3. Monitor solar particles

    The AI checks for surges in solar energetic particles that could impact communications.

    get_solar_energetic_particles

  4. Summarize risks

    The agent combines these three data points into a single risk report for your review.

    get_geomagnetic_stormsget_radiation_beltget_solar_energetic_particles

Try it

Copy these to start.

Use these prompts to begin monitoring with your agent.

Starting points

These are starting points. Swap out the specific assets like 'my satellite constellation' or 'the regional power grid' to match your setup.

NASA Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_PqdiVxU4WVsBqjMSuhaqrnGNo1S2Hpmh2jO9EkT1/mcp

Claude Desktop

Follow the steps below to connect in seconds.

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — NASA capabilities are ready to use.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "nasa-donki-space-weather-intelligence-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_PqdiVxU4WVsBqjMSuhaqrnGNo1S2Hpmh2jO9EkT1/mcp"
    }
  }
}
Copy into chat04

  • Check the current Kp index and tell me if there are any active geomagnetic storms affecting my satellite constellation.

  • Are there any solar energetic particles currently posing a risk to the power grid in North America?

  • Summarize the recent radiation belt activity and tell me if I should expect any satellite drag issues.

  • Based on the latest NASA DONKI data, give me a risk report for my communications hardware.

  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

Start here

Connect NASA DONKI once, then ask.

Just click to connect. Your credentials stay encrypted, and you can immediately start asking your AI about space weather.

Connect NASA DONKI to your AI

FAQ

How the monitoring works

  • 01

    Can the AI automatically shut down my power grid?

    No. The AI only provides the data and risk assessments. You must manually execute any physical or operational changes.

  • 02

    Does the AI update the NASA database?

    No. The AI only reads data from NASA DONKI to inform you. It cannot write to or change NASA's records.

  • 03

    How often does the AI check for storms?

    The AI checks whenever you ask it to or when you set up a recurring prompt in your client.

  • 04

    Can it predict storms weeks in advance?

    No. The tools provide data on current and recent activity to help you understand the present risk state.

  • 05

    What happens if the NASA data is unavailable?

    The AI will report that it cannot retrieve the requested data through the connector.

  • More questions about NASA DONKI? The Connector page answers them. See everything the NASA DONKI Connector can do

Connect NASA to Claude, Cursor, ChatGPT & more