• REACHABLE
  • LATENCY
  • DROPPED
  • MANUAL

How to troubleshoot network connectivity with your AI

Connect Nmap Online to your AI client once. After that, your agent handles the network testing and path analysis for you.

Ask AI about this page

Short answer

Can my AI help me find network issues?

Yes. Your agent uses Nmap Online to ping targets and trace routes to pinpoint where connections drop or slow down. You'll see the specific points of failure in the breakdown below.

Diagnostic outcomes.

Where your issues land.

The AI processes the network data and sorts the results into these categories.

REACHABLE

Host is online

The AI confirms the target is responding. You get a status report showing the destination is up.

LATENCY

Slow response times

The AI identifies high delay in the path. You'll see exactly which hop is causing the lag.

DROPPED

Packet loss detected

The AI spots where data is being lost. This points you to the specific segment causing the connection to fail.

MANUAL

Human action required

The AI flags issues it can't fix, like firewall blocks. You'll need to handle these security or hardware hurdles yourself.

The workflow

What your AI does when the request arrives.

Your agent acts as the operator, running the network commands and interpreting the raw data.

  1. Check host status

    The AI sends a request to the target IP or domain to see if it responds. This confirms if the destination is alive.

    ping_host

  2. Map the path

    The AI follows the route from your location to the target. It identifies every jump along the way.

    traceroute

  3. Find bottlenecks

    By looking at the hop data, the AI finds where delays or drops occur. It isolates the problematic segment.

    tracerouteping_host

  4. Report findings

    The AI translates the technical logs into a plain English summary. You get a clear explanation of the network health.

    ping_host

Try it

Copy these to start.

Use these prompts to kick off a diagnostic session.

Starting points

Swap out the IP addresses and domain names for the ones you actually need to test.

Nmap Online Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_zzcXTxJo17l0QjaigBuLdOKCDddybQ6rHt7cdH4s/mcp

Claude Desktop

Follow the steps below to connect in seconds.

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — Nmap Online capabilities are ready to use.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "nmap-online-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_zzcXTxJo17l0QjaigBuLdOKCDddybQ6rHt7cdH4s/mcp"
    }
  }
}
Copy into chat04

  • Ping 192.168.1.1 to see if it's reachable.

  • Trace the route to google.com and tell me where the latency starts.

  • Check if my local gateway at 10.0.0.1 is responding to pings.

  • Run a traceroute to the production server at 172.16.254.1 and look for packet loss.

  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

Start here

Connect Nmap Online once, then ask.

Click the link to connect the MCP to your client. Your credentials stay encrypted, and you can start troubleshooting immediately.

Connect Nmap Online to your AI

FAQ

How this task behaves.

  • 01

    Can the AI fix my network settings?

    No. The AI can only diagnose the path and host status. You have to manually change your router or OS settings.

  • 02

    Can the AI bypass a firewall?

    No. If a firewall is dropping packets, the AI will report the loss, but it cannot penetrate the security layer.

  • 03

    Does the AI run these commands on my local machine?

    No. The commands run through the Nmap Online MCP, not directly on your local terminal.

  • 04

    Can the AI scan for open ports?

    No. This specific setup is limited to checking host reachability and tracing network paths.

  • 05

    How does the AI know where the lag is?

    The AI uses traceroute to measure the time it takes for each hop to respond, identifying the specific point of delay.

  • More questions about Nmap Online? The Connector page answers them. See everything the Nmap Online Connector can do

Connect Nmap Online to Claude, Cursor, ChatGPT & more