• LIVE
  • HISTORY
  • ALERTS
  • HUMAN

How to monitor personal aircraft status with your AI

Connect OpenSky Network to your AI client to pull live telemetry and flight logs for your fleet.

Ask AI about this page

Short answer

How can I track my aircraft with my AI?

Your AI uses OpenSky Network data to pull live state updates and historical flight records for specific aircraft. You get real-time positioning and past flight paths through simple text commands. This breakdown shows how your agent handles the data.

Data outcomes

What you can do with this data

The AI turns raw flight telemetry into clear answers.

LIVE

Real-time tracking

The AI pulls current position and altitude data. You'll see exactly where your plane is right now.

HISTORY

Flight logs

Access past flight paths and timestamps. This helps you review recent trips or verify flight times.

ALERTS

Status monitoring

Ask your agent to check if a specific tail number is currently airborne or on the ground.

HUMAN

Manual verification

You remain responsible for flight planning and safety decisions. The AI only provides the data.

The workflow

What your AI does when you ask for flight data.

The agent acts as a bridge between your questions and the OpenSky Network database.

  1. Check current position

    The agent looks up the most recent telemetry for your specific aircraft.

    get_my_states

  2. Retrieve flight history

    The agent pulls a list of previous flights for your registered tail numbers.

    get_my_flights

  3. Analyze flight patterns

    The agent uses the retrieved flight data to summarize recent activity.

    get_my_flights

  4. Verify aircraft status

    The agent confirms if an aircraft is currently in flight or stationary.

    get_my_states

Try it

Copy these to start.

Use these prompts once you've connected the MCP.

Starting points

Swap out the tail numbers and dates with your actual aircraft information.

OpenSky Network Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_gollcDW6qrXaGepGtam9nSTQe5vZ506xGo4RlP5j/mcp

Claude Desktop

Follow the steps below to connect in seconds.

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — OpenSky Network capabilities are ready to use.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "opensky-network-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_gollcDW6qrXaGepGtam9nSTQe5vZ506xGo4RlP5j/mcp"
    }
  }
}
Copy into chat04

  • Where is my aircraft with tail number N12345 right now?

  • Show me the flight history for N54321 from last Tuesday.

  • Is N98765 currently in the air?

  • Summarize the last three flights for my aircraft N11223.

  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

Start here

Connect OpenSky Network once, then ask.

Click the link to authorize the connection. Your credentials stay encrypted, and you can immediately start asking questions in your preferred AI client.

Connect OpenSky Network to your AI

FAQ

Common questions

  • 01

    Can the AI change my aircraft registration?

    No. The AI can only read flight and state data; it cannot modify any registration or ownership records.

  • 02

    Does the AI track all aircraft in the world?

    No. It specifically uses the tools to pull data for the aircraft you ask about via the OpenSky Network.

  • 03

    Can the AI send commands to the plane?

    No. This connection is read-only for telemetry and flight history.

  • 04

    How often is the position data updated?

    The data depends on the real-time updates provided by the OpenSky Network state tool.

  • 05

    Can I use this with Claude?

    Yes, as long as you are using an MCP-compatible client like Claude Desktop.

  • More questions about OpenSky Network? The Connector page answers them. See everything the OpenSky Network Connector can do

Connect OpenSky Network to Claude, Cursor, ChatGPT & more