• CALCULATION
  • BREAKDOWN
  • VERIFICATION
  • DOCUMENTATION

How to plan pediatric daily fluid volumes with your AI

Connect your AI to the Pediatric Fluid Calculator to automate maintenance fluid math. It handles the Holliday-Segar calculations so you can focus on the patient.

Ask AI about this page

Short answer

How do I calculate pediatric fluid needs with AI?

Give your AI the patient's weight, and it will apply the Holliday-Segar rule to find the total 24-hour requirement. You'll get the specific volume and a breakdown of the weight tiers used. Here is how the process works.

The results you get.

Where the data lands.

Once you provide the weight, your AI handles the math and delivers these specific outputs.

CALCULATION

Total daily volume

The AI uses the Holliday-Segar rule to find the 24-hour maintenance requirement. You get a single, accurate number for the total daily intake.

BREAKDOWN

Weight tier logic

The AI identifies which weight brackets apply to the patient. It shows how the math scales from the first 10kg up to the total weight.

VERIFICATION

Human review needed

You must check the final volume against clinical judgment. The AI provides the math, but you make the final medical decision.

DOCUMENTATION

Ready for charts

The AI formats the result into a clear statement. You can copy this directly into a patient note or order set.

The workflow

What your AI does when the weight arrives.

The AI acts as a calculator to remove the manual math from your workflow.

  1. Receive weight

    Your AI takes the weight you provide in the chat and prepares it for the calculation tool.

    calculate_daily_volume

  2. Apply formula

    The AI runs the weight through the specific Holliday-Segar formula to find the maintenance volume.

    calculate_daily_volume

  3. Format output

    The AI organizes the result into a readable format for your clinical documentation.

    calculate_daily_volume

  4. Confirm results

    The AI presents the calculated volume to you for final verification before you use it.

    calculate_daily_volume

Try it

Copy these to start.

Use these prompts to trigger the calculation immediately.

Starting points

Replace the bracketed weight with the actual patient weight.

Pediatric Fluid Calculator Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_4GWxbSPyW9R6XXUGwFVtS60brpst8b39JKZWqaRL/mcp

Claude Desktop

Follow the steps below to connect in seconds.

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — Pediatric Fluid Calculator capabilities are ready to use.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "pediatric-fluid-calculator-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_4GWxbSPyW9R6XXUGwFVtS60brpst8b39JKZWqaRL/mcp"
    }
  }
}
Copy into chat04

  • Calculate the 24-hour fluid requirement for a child weighing [X] kg.

  • Using the Holliday-Segar rule, what is the daily fluid volume for a [X] kg patient?

  • I have a patient that is [X] kg. Run the pediatric fluid calculation.

  • Show me the daily fluid breakdown for a [X] kg infant.

  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

Start here

Connect Pediatric Fluid Calculator once, then ask.

Click the link to connect the MCP to your preferred AI client. Your credentials stay encrypted, and you can start calculating immediately.

Connect Pediatric Fluid Calculator to your AI

FAQ

How this task behaves.

  • 01

    Does the AI calculate hourly rates?

    No. This tool specifically calculates the total 24-hour volume using the Holliday-Segar rule.

  • 02

    Can the AI change the patient's weight?

    No. The AI only uses the weight you provide to perform the calculation; it cannot modify your medical records.

  • 03

    Does it handle fluid boluses?

    No. This tool is for calculating maintenance fluid volumes, not emergency bolus amounts.

  • 04

    Is the math always correct?

    The AI follows the Holliday-Segar formula exactly, but you must always verify the output against clinical standards.

  • 05

    Can I use this for adults?

    No. This tool is specifically designed for pediatric fluid requirements.

  • More questions about Pediatric Fluid Calculator? The Connector page answers them. See everything the Pediatric Fluid Calculator Connector can do

Connect Pediatric Fluid Calculator to Claude, Cursor, ChatGPT & more