• DATA
  • ANALYSIS
  • PLANNING
  • HUMAN

How to audit device standby wattage with your AI

Connect your AI to a catalog of common electronics to find out how much power they pull when they aren't in use.

Ask AI about this page

Short answer

How can I check the idle power draw of my devices using AI?

Your AI pulls estimated standby wattage data from a specialized catalog for common electronics. You'll get a breakdown of energy waste for specific devices to help you decide what to unplug.

The results of your audit

What you get from this audit

The AI processes the catalog data to give you these specific outputs.

DATA

Estimated wattage

The AI identifies the idle power draw for specific models or device types. You get a clear number for each item.

ANALYSIS

Total waste calculation

The AI sums up the standby draw for all devices you list. This shows the total energy being wasted across your setup.

PLANNING

Reduction strategy

The AI suggests which devices are the biggest offenders. You'll know exactly where to focus your energy-saving efforts.

HUMAN

Physical verification

The AI provides estimates based on the catalog. You'll need to use a physical plug meter to confirm the exact real-world numbers.

The workflow

What your AI does when the request arrives.

The AI uses the catalog to turn your list of devices into a power audit.

  1. Identify devices

    The AI looks through the electronic device catalog to find the specific models or types you mentioned.

    fetch_device_catalog

  2. Extract wattage

    The AI pulls the idle power draw values for every device found in the catalog.

    fetch_device_catalog

  3. Calculate totals

    The AI adds up the individual standby wattages to find your total energy drain.

    fetch_device_catalog

  4. Summarize findings

    The AI presents a list of the highest energy consumers and total estimated waste.

    fetch_device_catalog

Try it

Copy these to start.

Use these prompts to begin your audit.

Starting points

Swap out the device names for the ones actually sitting in your house.

Standby Energy Waste Calculator Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_0GR3JAaUMOmpkXgediENqKotA6sRBx4OZO6G3m6Z/mcp

Claude Desktop

Follow the steps below to connect in seconds.

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — Standby Energy Waste Calculator capabilities are ready to use.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "standby-energy-waste-calculator-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_0GR3JAaUMOmpkXgediENqKotA6sRBx4OZO6G3m6Z/mcp"
    }
  }
}
Copy into chat04

  • Find the standby wattage for my Sony Bravia TV and my gaming console in the catalog.

  • Calculate the total idle power draw for a desktop PC, a monitor, and a printer.

  • Which of these devices wastes the most energy when idle: a microwave, a coffee maker, or a smart speaker?

  • List the estimated standby wattage for all smart home hubs in the catalog.

  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

Start here

Connect Standby Energy Waste Calculator once, then ask.

One click connects this MCP to your AI client. Your credentials stay encrypted, and you can start auditing immediately.

Connect Standby Energy Waste Calculator to your AI

FAQ

How this task behaves

  • 01

    Does the AI know the exact wattage of my specific device?

    No. The AI uses estimated standby wattage from the device catalog. Real-world numbers may vary based on your specific settings.

  • 02

    Can the AI turn off my devices to save power?

    No. This MCP only reads data from the catalog. It cannot control your hardware or smart plugs.

  • 03

    What if my device isn't in the catalog?

    If the device isn't in the catalog, the AI won't find a wattage estimate. You'll have to provide the wattage manually for the AI to include it in calculations.

  • 04

    Can I use this with Claude?

    Yes, as long as you are using an MCP-compatible client like Claude Desktop.

  • 05

    Does the AI save my energy usage data?

    The AI client handles your conversation history, but this MCP only provides data from the catalog when you ask for it.

  • More questions about Standby Energy Waste Calculator? The Connector page answers them. See everything the Standby Energy Waste Calculator Connector can do

Connect Standby Energy Waste Calculator to Claude, Cursor, ChatGPT & more