• TOTALS
  • LISTS
  • BREAKDOWN
  • HUMAN

How to sum total project material costs with your AI

Connect your waterproofing data once. Your AI handles the math and the consolidation for you.

Ask AI about this page

Short answer

How do I get a total material cost from multiple zones?

Your AI pulls the specific material needs from every individual zone you've calculated and adds them up into one master list. You get a single budget figure and a full breakdown of what to buy. The following details show how it works.

Where every calculation lands.

The project outcomes

Once the AI processes your zone data, it organizes everything into these four views.

TOTALS

Single budget figure

The AI uses aggregate_project_summary to give you one final number for the entire job. You'll see the bottom line immediately.

LISTS

Consolidated material list

Instead of checking every zone, you get one list of every roll, bucket, or sealant needed. It combines duplicates so you don't over-order.

BREAKDOWN

Zone-by-zone audit

You can still see how much each specific area contributed to the total. This helps you spot where the most material is being used.

HUMAN

Final purchase review

The AI provides the math, but you decide if the quantities match your actual site conditions. You handle the final order placement.

The workflow

What your AI does when the data arrives.

The AI doesn't just add numbers; it interprets the specific material types across your entire project.

  1. Gather zone data

    The AI reads through every individual waterproofing zone you have already calculated. It looks for material types and quantities in each.

    aggregate_project_summary

  2. Consolidate materials

    It identifies where different zones use the same products. It merges these into a single requirement list.

    aggregate_project_summary

  3. Calculate totals

    The AI performs the math to turn those quantities into a total project cost. It handles the heavy lifting of the summation.

    aggregate_project_summary

  4. Generate summary

    The final step is producing a clean overview of the project needs. This is ready for you to review or hand off.

    aggregate_project_summary

Try it

Copy these to start.

Use these prompts to trigger the calculation immediately.

Starting points

These are starting points. Swap out the specific zone names or project IDs with your actual data.

Waterproofing Calculator Connector

You're all set. Choose your MCP client and follow the setup instructions.

Connector linkhttps://edge.vinkius.com/vk_preview_Sea38DLcKIymkOWbnuwsP8yBMApiEKNu6VWkCpxb/mcp

Claude Desktop

Follow the steps below to connect in seconds.

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — Waterproofing Calculator capabilities are ready to use.
Configuration · claude_desktop_config.jsonCopy
{
  "mcpServers": {
    "waterproofing-area-calculator-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_Sea38DLcKIymkOWbnuwsP8yBMApiEKNu6VWkCpxb/mcp"
    }
  }
}
Copy into chat04

  • Sum up the total material costs for all zones in the North Wing project.

  • Give me a consolidated list of all sealant quantities needed for the basement zones.

  • How much will the total waterproofing materials cost for the entire foundation project?

  • Create a summary of all materials used across the three residential zones I just calculated.

  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

Start here

Connect Waterproofing Area Calculator once, then ask.

You only need to link the MCP to your client once. Your login credentials stay encrypted, and you can start asking questions right away.

Connect Waterproofing Area Calculator to your AI

FAQ

Common questions

  • 01

    Can the AI change my original zone calculations?

    No. The AI only reads the data you have already calculated to create the summary. It does not edit your individual zone entries.

  • 02

    Will it automatically buy the materials for me?

    No. The AI provides the calculated list and the total cost, but you must handle the actual purchasing yourself.

  • 03

    Does it account for waste percentages?

    The AI sums exactly what is in your zone calculations. If you want to include waste, you should add that to your individual zone math first.

  • 04

    Can I use this with Claude?

    Yes, as long as you are using an MCP-compatible client like Claude Desktop.

  • 05

    Does it work for multiple different projects at once?

    Yes, you can ask it to sum costs for a specific project or all zones currently in the system.

  • More questions about Waterproofing Area Calculator? The Connector page answers them. See everything the Waterproofing Area Calculator Connector can do

Connect Waterproofing Calculator to Claude, Cursor, ChatGPT & more