Connectez AT&T IoT à ChatGPT, Claude et Gemini

• 01 / 03Gérer les SIM
• 02 / 03Surveiller la consommation IoT
• 03 / 03Dépanner vos objets connectés

Jour le plus rapide

749ms

Jour le plus lent

1062ms

Tendance sur 14 jours

En ralentissement+5%

AT&T IoT Connector

Tout est prêt. Choisissez votre client MCP et suivez les instructions de configuration.

Lien du connecteurhttps://edge.vinkius.com/vk_preview_YFstwCIlx1nPc9O3GzBKiwQJk2qplbw9H9PNBDuZ/mcpCopier

Claude Desktop

Suivez les étapes ci-dessous pour vous connecter en quelques secondes.

1. 1In Claude Desktop, open Settings → Connectors.
2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
3. 3Click Add and start a new chat — AT&T IoT capabilities are ready to use.

Configuration · claude_desktop_config.jsonCopier

{
  "mcpServers": {
    "att-iot-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_YFstwCIlx1nPc9O3GzBKiwQJk2qplbw9H9PNBDuZ/mcp"
    }
  }
}

• Claude
• ChatGPT
• Cursor
• VS Code
• Windsurf
• Claude Code
• JetBrains
• Cline

Les instructions pas à pas pour chaque client sont dans le guide. Comment connecter

Configuration guidée pour Claude ? Configurer AT&T IoT avec Claude et les autres IA

Voyez tous les clients IA avec lesquels ce connector fonctionne ↑

• 01

  Gestionnaires de flotte IoT

  Surveillez la santé des dispositifs à grande échelle, suivez la consommation des pools de données et prévenez l'épuisement des SIM avant qu'il ne se produise.

• 02

  Ingénieurs de terrain

  Diagnostiquez à distance les dispositifs hors ligne, activez les nouveaux déploiements ou suspendez instantanément les SIM perdues ou volées.

• 03

  Opérations Réseau

  Résolvez les problèmes de connectivité avec des diagnostics automatisés, vérifiez les configurations APN et consultez les pannes connues.

• 04

  Équipes Financières

  Auditez l'utilisation des données sur l'ensemble de la flotte, prévoyez les cycles de facturation et réallouez la capacité inutilisée pour réduire les coûts.

• 01

  Does this MCP work with all AI clients?

  Yes. You connect this MCP using any AI client that supports the Model Context Protocol (MCP). This means you can use your existing setup in Claude, Cursor, Windsurf, or VS Code.

• 02

  What kind of data can I get about my devices?

  You can get real-time connectivity status, including signal strength and IP addresses. You can also retrieve historical data usage, daily breakdowns, and current data allowance for any SIM.

• 03

  Can I manage data pools with this MCP?

  Absolutely. You can list all shared data pools, monitor aggregate consumption, and identify the top-consuming devices to prevent the pool from running dry.

• 04

  Is this for technical people only?

  No. While the underlying capabilities are technical, the MCP lets you manage the entire process using natural conversation. You don't need to know the API calls; you just need to know what you want to achieve.

• 05

  What if I need to change a device's settings?

  You can update configuration settings like rate limits or APN settings using the MCP. This is useful for optimizing performance or moving devices between different data plans.

• 06

  What information do I need to identify an IoT SIM?

  Each IoT SIM is uniquely identified by its ICCID (Integrated Circuit Card Identifier) -- a 19-20 digit number printed on the SIM card or available in your IoT Control Center dashboard. The ICCID is required for all device-specific operations like activation, suspension, and usage queries. You can list all your devices with list_devices to discover ICCIDs for your entire fleet.

• 07

  How do data pools work and how can I prevent pool exhaustion?

  Data pools are shared data plans across multiple IoT SIMs. Instead of each SIM having an individual cap, all devices in the pool draw from a common data bucket. Use list_data_pools to see your pools, get_pool_usage to check consumption and identify top-consuming devices, and set up alerts before reaching the limit. If a pool is near exhaustion, you can suspend low-priority devices with suspend_device or migrate high-usage devices to a different pool with update_device_settings.

• 08

  Can I automatically diagnose why an IoT device went offline?

  Yes. Use the diagnose_connectivity capability with the device's ICCID. It runs automated checks for network registration status, APN configuration, active data session, signal strength, and known network outages in the device's area. The capability returns detailed diagnostic results with recommended actions -- helping your field engineers resolve connectivity issues without manual portal navigation.

• 

  Hologram.io Connecteur IA

  Automate IoT connectivity via Hologram.io — manage devices, SIM cards, and data usage directly from any AI age

  Voir
• 

  Balena Connecteur IA

  Manage IoT fleets and edge devices via Balena — list devices, manage environment variables, and track releases

  Voir
• 

  Data Pipeline Prover Connecteur IA

  A data team asked an AI to build an ETL pipeline. No schema contract. No idempotency. No freshness SLA. The pi

  Voir
• 

  data.world Connecteur IA

  Equip your AI agent to discover and manage data assets, projects, and queries directly via the data.world API.

  Voir

Suggestions

• 

  Hevo Data (ETL & Data Pipeline) Connecteur IA

  Manage data pipelines via Hevo — list pipelines, monitor destinations, and track usage.

  Voir
• 

  AWS IoT Core Device & Limits Calculator Connecteur IA

  Calculate AWS IoT Core messaging throughput, device scale, and resource limits.

  Voir
• 

  Home Network Device Inventory Connecteur IA

  Organize and monitor all connected devices on your home network.

  Voir
• 

  Data.gov Catalog Connecteur IA

  Access the official US Government open data catalog. Search thousands of datasets, organizations, and spatial

  Voir