An astronaut overseeing a futuristic data hub

Flammability Classification EngineをAIに接続

一度設定すれば、ChatGPT、Claude、Cursorなど、お気に入りのクライアントでどれでも動きます。すべては裏側で安全に動くので、あなたは安心して本当に大切なことに集中できます。化学物質の可燃性と危険性を即座に判定します

このConnectorについてAIに質問

Vinkiusが開発・運用・ホスティング。

MCP認証済み · 本番環境対応 · Vinkius保証

Waiting for input…

Works with modern AI clients that support MCP, including ChatGPT, Claude, Cursor, and more.

ChatGPTClaudeCursorPerplexityGeminiMicrosoft CopilotRaycastMeta AI

AIが仕事をこなします。私たちが安全に守ります。

他のAIツールではこれは手に入りません。ワークフローはお気に入りのクライアントで動き、アカウントは守られ、エージェントに何を許すかはあなたが決めます。これこそ乗り換えるべき理由です。

すべてのConnectorは当社のインフラストラクチャの中、あなたのワークフローが動くのと同じ場所にあります。下の3つはすでにその一部で、背景で静かに働き、あなたが意識する必要がないようにしてくれます。追加するものも、設定するものも、心配することもありません。

A futuristic MCP client docking bay
V8 Isolate01

各Connectorは独自の密閉された環境内で実行されます。

各Connectorは独自の封印されたV8ランタイムで実行され、ファイル、システム、他のサーバーへのアクセスはありません。Connectorが自身のリクエストを超えて中身を見ることはありません。

Kill Switch02

1つのスイッチで全エージェントを停止。即座に。

1つのアクションで全Connectorを無効化し、全トークンを失効させ、全セッションを終了します。AI Governanceが記録を保持します。

ユーザーごとのFinOps03

驚きではなく、一時停止する支出制限。

各ユーザーは自身の接続と認証情報を持ち、他から隔離されています。支出制限を超える操作は課金されず、あなたの承認を待ちます。

3つのコントロールが、AIが接続するレイヤーに 組み込まれています。

厳選セット · 4機能

届けるのは、本当に必要な動作だけです。

機能セット01 / 01

01-04

このセットには4機能あります。

Flammability Classification Engineで使える4機能の一部です。

  1. 01

    周囲の発火リスク評価

    現在の環境条件に基づき、即時的な発火のリスクを評価します。

  2. 02

    気体の分類

    可燃性気体の危険性分類を判定します。

  3. 03

    液体の分類

    可燃性液体のGHSおよびNFPA分類を判定します。

  4. 04

    保管コンプライアンスの確認

    分類された物質に対する、規制に基づいた具体的な保管ガイドラインを提供します。

実際の業務

チームが実際に回している作業

01

Safety Auditing

Use the MCP to verify that current chemical storage matches the required NFPA ratings.

02

Emergency Response

Check ambient risk levels instantly when a temperature spike occurs near flammable liquids.

03

New Material Intake

Classify incoming chemicals by feeding their flash and boiling points into your AI client.

04

Regulatory Documentation

Generate storage compliance instructions for safety manuals using the classification data.

1つのConnector、すべてのAI

Flammability Classification Engineは、最も人気のあるAIクライアントで動きます。

これは最も人気のあるクライアントで、それぞれにステップバイステップのガイドがあります。リンクは1つ、設定は一度、ガバナンスと可視性は最初から組み込み。しかもすべてMCP標準で動くため、同じ接続は他の対応クライアントでもそのまま使えます。作り直す必要はありません。

自社アプリを作っていますか?Connectorはあなたのもの。

Flammability Classification Engineを働かせるのにクライアントは不要です。同じホストされた接続が、あなたのアプリやエージェントのコードにそのまま組み込め、すべてのリクエストに同じガバナンスが適用されます。作るのも、会話するのも、1つの接続で両方。

実測値、推定値ではない

平均872ms。本番環境で高速。

Flammability Classification Engineは本番サービスに対して毎日チェックされています。

日次平均最大1025ms
10月3日今日
最速日
666ms
最遅日
1025ms
14日間の傾向
安定-2%

クライアントを接続

1つのURL。すべてのクライアント。

Connectorを有効化し、リンクをコピーして、いつも使うクライアントに貼り付けるだけ。4個の機能がすぐに使えます。

プレビューアクセス · プロバイダー認証ではありません

vk_preview_* トークンは Vinkius のプレビューインフラに属します。Claude が Flammability Classification Engine のケイパビリティを検出して表示できるようにし、AI の中でその体験を確認できます。

このトークンは Flammability Classification Engine のアカウントを認証するものではありません。認証情報や実際のアカウントデータが必要なアクションは、Connector を有効化してサービスを承認するまで実行されない場合があります。

Flammability Classification Engine Connector

準備完了です。MCPクライアントを選択し、セットアップ手順に従ってください。

コネクタリンクhttps://edge.vinkius.com/vk_preview_Lwqg4ym5trwjRrGy5Q9d7Pv92oZw248rCkxzTeho/mcp

Claude Desktop

以下の手順で数秒で接続できます。

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — Flammability Classification Engine capabilities are ready to use.
設定 · claude_desktop_config.jsonコピー
{
  "mcpServers": {
    "flammability-classification-engine-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_Lwqg4ym5trwjRrGy5Q9d7Pv92oZw248rCkxzTeho/mcp"
    }
  }
}
  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

各クライアントの手順ガイドはこちらです。 接続方法

Claude向けのガイド付きセットアップ? Flammability Classification EngineをClaudeや他のAIに設定する

このConnectorが対応するすべてのAIクライアントを見る ↑

対象ユーザー

Flammability Classification Engineユーザーが任せたい仕事のために。

化学物質を取り扱う製造現場や研究施設における安全管理業務を自動化します。

  • 01

    安全管理責任者

    GHSやNFPAに基づいた正確な危険性評価と、規制遵守のための保管管理に活用できます。

  • 02

    化学エンジニア

    物質の熱特性データから、迅速に分類結果とリスク評価を取得できます。

  • 03

    現場作業員

    周囲の温度条件から、現在の作業環境における発火リスクを即座に把握できます。

FAQ

Flammability Classification Engineユーザーからのよくある質問。

  • 01

    What standards does this MCP use for classification?

    The MCP uses GHS hazard categories and NFPA flammability ratings to classify substances.

  • 02

    Can I use this with Claude or Cursor?

    Yes, you can connect this MCP to any MCP-compatible client like Claude, Cursor, or Windsurf.

  • 03

    What data is needed to classify a liquid?

    You need to provide thermal properties such as the flash point and boiling point to the capability.

  • 04

    How does it handle ambient temperature risks?

    The check_ambient_risk capability compares the current environmental temperature to the substance's flash point to determine ignition probability.

  • 05

    Does it provide storage instructions?

    Yes, the get_storage_compliance capability provides specific regulatory guidelines based on the substance's classification.

  • 06

    What standards does this capability use for classification?

    The capability uses the Globally Harmonized System (GHS) for hazard categories and the NFPA 704 standard for flammability ratings.

  • 07

    How can I check if a substance is safe to store in my current environment?

    You can use the check_ambient_risk capability by providing the substance's flash point and the current ambient temperature to assess immediate ignition probability.

  • 08

    Does this capability provide storage instructions?

    Yes, both classify_liquid and classify_gas return specific storage instructions, and get_storage_compliance provides detailed regulatory guidelines for storage zones and containment.

『Flammability Classification Engine』を Claude、Cursor、ChatGPT などに接続