An astronaut overseeing a futuristic data hub

Heater Cost CalculatorをChatGPTとClaudeに接続

一度設定すれば、ChatGPT、Claude、Cursorなど、お気に入りのクライアントでどれでも動きます。すべては裏側で安全に動くので、あなたは安心して本当に大切なことに集中できます。消費電力と料金単価から、ヒーターの運用コストを正確に把握できます。

このConnectorについてAIに質問

Vinkiusが開発・運用・ホスティング。

MCP認証済み · 本番環境対応 · Vinkius保証

Waiting for input…

Works with modern AI clients that support MCP, including ChatGPT, Claude, Cursor, and more.

ChatGPTClaudeCursorPerplexityGeminiMicrosoft CopilotRaycastMeta AI

AIが仕事をこなします。私たちが安全に守ります。

他のAIツールではこれは手に入りません。ワークフローはお気に入りのクライアントで動き、アカウントは守られ、エージェントに何を許すかはあなたが決めます。これこそ乗り換えるべき理由です。

すべてのConnectorは当社のインフラストラクチャの中、あなたのワークフローが動くのと同じ場所にあります。下の3つはすでにその一部で、背景で静かに働き、あなたが意識する必要がないようにしてくれます。追加するものも、設定するものも、心配することもありません。

A futuristic MCP client docking bay
V8 Isolate01

各Connectorは独自の密閉された環境内で実行されます。

各Connectorは独自の封印されたV8ランタイムで実行され、ファイル、システム、他のサーバーへのアクセスはありません。Connectorが自身のリクエストを超えて中身を見ることはありません。

Kill Switch02

1つのスイッチで全エージェントを停止。即座に。

1つのアクションで全Connectorを無効化し、全トークンを失効させ、全セッションを終了します。AI Governanceが記録を保持します。

ユーザーごとのFinOps03

驚きではなく、一時停止する支出制限。

各ユーザーは自身の接続と認証情報を持ち、他から隔離されています。支出制限を超える操作は課金されず、あなたの承認を待ちます。

3つのコントロールが、AIが接続するレイヤーに 組み込まれています。

厳選セット · 4機能

届けるのは、本当に必要な動作だけです。

機能セット01 / 01

01-04

このセットには4機能あります。

Heater Cost Calculatorで使える4機能の一部です。

  1. 01

    1日の使用コストを計算

    ヒーターを丸一日使用した場合の推定コストを算出します。

  2. 02

    1回あたりの使用コストを計算

    特定の暖房セッション1回分にかかる料金を計算します。

  3. 03

    ヒーターの効率を比較

    2つの異なるヒーターモデルについて、1日あたりの運用コストを比較します。

  4. 04

    使用可能時間を算出

    設定した予算内で、ヒーターを最大何時間使用できるかを判定します。

実際の業務

チームが実際に回している作業

01

Buying Decisions

Compare two heaters to see which one costs less to run daily.

02

Monthly Budgeting

Estimate how much a new heater will add to your monthly electric bill.

03

Strict Budgeting

Find out how many hours you can use a heater if you only have a certain amount of money to spend.

04

Single Use Planning

Calculate the cost of running a heater for a specific work shift or evening.

1つのConnector、すべてのAI

Heater Cost Calculatorは、最も人気のあるAIクライアントで動きます。

これは最も人気のあるクライアントで、それぞれにステップバイステップのガイドがあります。リンクは1つ、設定は一度、ガバナンスと可視性は最初から組み込み。しかもすべてMCP標準で動くため、同じ接続は他の対応クライアントでもそのまま使えます。作り直す必要はありません。

自社アプリを作っていますか?Connectorはあなたのもの。

Heater Cost Calculatorを働かせるのにクライアントは不要です。同じホストされた接続が、あなたのアプリやエージェントのコードにそのまま組み込め、すべてのリクエストに同じガバナンスが適用されます。作るのも、会話するのも、1つの接続で両方。

実測値、推定値ではない

平均887ms。本番環境で高速。

Heater Cost Calculatorは本番サービスに対して毎日チェックされています。

日次平均最大1323ms
10月3日今日
最速日
800ms
最遅日
1323ms
14日間の傾向
安定+3%

クライアントを接続

1つのURL。すべてのクライアント。

Connectorを有効化し、リンクをコピーして、いつも使うクライアントに貼り付けるだけ。4個の機能がすぐに使えます。

プレビューアクセス · プロバイダー認証ではありません

vk_preview_* トークンは Vinkius のプレビューインフラに属します。Claude が Heater Cost Calculator のケイパビリティを検出して表示できるようにし、AI の中でその体験を確認できます。

このトークンは Heater Cost Calculator のアカウントを認証するものではありません。認証情報や実際のアカウントデータが必要なアクションは、Connector を有効化してサービスを承認するまで実行されない場合があります。

Heater Cost Calculator Connector

準備完了です。MCPクライアントを選択し、セットアップ手順に従ってください。

コネクタリンクhttps://edge.vinkius.com/vk_preview_9SvuiBt2OI2r7Bszb95KUfimuKiAcALTshPXlrVT/mcp

Claude Desktop

以下の手順で数秒で接続できます。

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — Heater Cost Calculator capabilities are ready to use.
設定 · claude_desktop_config.jsonコピー
{
  "mcpServers": {
    "heater-cost-calculator-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_9SvuiBt2OI2r7Bszb95KUfimuKiAcALTshPXlrVT/mcp"
    }
  }
}
  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

各クライアントの手順ガイドはこちらです。 接続方法

Claude向けのガイド付きセットアップ? Heater Cost CalculatorをClaudeや他のAIに設定する

このConnectorが対応するすべてのAIクライアントを見る ↑

対象ユーザー

Heater Cost Calculatorユーザーが任せたい仕事のために。

This is for anyone managing household or office energy expenses who wants quick, accurate math via an AI interface.

  • 01

    Homeowners

    They ask the agent to estimate seasonal heating costs.

  • 02

    Property Managers

    They use it to compare heater models for rental units.

  • 03

    Budget Analysts

    They calculate energy overhead for small office spaces.

FAQ

Heater Cost Calculatorユーザーからのよくある質問。

  • 01

    What information do I need to calculate heater costs?

    You need the wattage of the heater and your local electricity rate per kilowatt-hour (kWh).

  • 02

    Can I compare two different heaters?

    Yes, you can use the comparison capability to see the daily cost difference between two different wattage models.

  • 03

    How does this MCP work with my AI?

    Once connected, your AI client uses the capabilities in this MCP to perform the math for you automatically.

  • 04

    Can I set a maximum budget?

    Yes, you can ask the agent to determine how many hours you can run a heater without exceeding a specific dollar amount.

  • 05

    Is this for electric heaters only?

    This MCP is specifically designed for calculating the costs of electric heating devices based on wattage.

  • 06

    How do I calculate the cost of one heating session?

    You can use the calculate_single_run_cost capability by providing the heater's wattage, the duration in hours, and your local electricity rate.

  • 07

    How can I stay within a specific budget?

    Use the get_usage_threshold_hours capability to find the maximum number of hours you can operate your heater without exceeding your budget limit.

『Heater Cost Calculator』を Claude、Cursor、ChatGPT などに接続