An astronaut overseeing a futuristic data hub

Light Bulb Lifecycle ComparatorをAIに接続

一度設定すれば、ChatGPT、Claude、Cursorなど、お気に入りのクライアントでどれでも動きます。すべては裏側で安全に動くので、あなたは安心して本当に大切なことに集中できます。電球の寿命とエネルギー効率を分析し、最適な選択を支援します。

このConnectorについてAIに質問

Vinkiusが開発・運用・ホスティング。

MCP認証済み · 本番環境対応 · Vinkius保証

Waiting for input…

Works with modern AI clients that support MCP, including ChatGPT, Claude, Cursor, and more.

ChatGPTClaudeCursorPerplexityGeminiMicrosoft CopilotRaycastMeta AI

AIが仕事をこなします。私たちが安全に守ります。

他のAIツールではこれは手に入りません。ワークフローはお気に入りのクライアントで動き、アカウントは守られ、エージェントに何を許すかはあなたが決めます。これこそ乗り換えるべき理由です。

すべてのConnectorは当社のインフラストラクチャの中、あなたのワークフローが動くのと同じ場所にあります。下の3つはすでにその一部で、背景で静かに働き、あなたが意識する必要がないようにしてくれます。追加するものも、設定するものも、心配することもありません。

A futuristic MCP client docking bay
V8 Isolate01

各Connectorは独自の密閉された環境内で実行されます。

各Connectorは独自の封印されたV8ランタイムで実行され、ファイル、システム、他のサーバーへのアクセスはありません。Connectorが自身のリクエストを超えて中身を見ることはありません。

Kill Switch02

1つのスイッチで全エージェントを停止。即座に。

1つのアクションで全Connectorを無効化し、全トークンを失効させ、全セッションを終了します。AI Governanceが記録を保持します。

ユーザーごとのFinOps03

驚きではなく、一時停止する支出制限。

各ユーザーは自身の接続と認証情報を持ち、他から隔離されています。支出制限を超える操作は課金されず、あなたの承認を待ちます。

3つのコントロールが、AIが接続するレイヤーに 組み込まれています。

厳選セット · 4機能

届けるのは、本当に必要な動作だけです。

機能セット01 / 01

01-04

このセットには4機能あります。

Light Bulb Lifecycle Comparatorで使える4機能の一部です。

  1. 01

    電球の性能指標を算出

    単一の電球タイプにおける技術的および財務的なパフォーマンス指標を算出します。

  2. 02

    電球プロファイルの比較

    2つ以上の異なる電球構成を比較し、最も費用対効果の高い選択肢を特定します。

  3. 03

    エネルギー効率の評価

    消費電力に基づいて、電球の定性的な効率スコアを決定します。

  4. 04

    交換による影響のシミュレーション

    電球の定格寿命の変化が、総所有コストにどの程度影響するかを評価します。

実際の業務

チームが実際に回している作業

01

Commercial Retrofits

Compare the long-term savings of switching an entire warehouse from fluorescent to LED lighting.

02

Residential Budgeting

Determine if a higher upfront cost for a premium bulb is offset by lower monthly energy bills.

03

Energy Audits

Use efficiency ratings to identify which lighting fixtures are underperforming.

04

Procurement Planning

Evaluate how different bulb lifespans will affect your replacement schedule and budget over several years.

1つのConnector、すべてのAI

Light Bulb Lifecycle Comparatorは、最も人気のあるAIクライアントで動きます。

これは最も人気のあるクライアントで、それぞれにステップバイステップのガイドがあります。リンクは1つ、設定は一度、ガバナンスと可視性は最初から組み込み。しかもすべてMCP標準で動くため、同じ接続は他の対応クライアントでもそのまま使えます。作り直す必要はありません。

自社アプリを作っていますか?Connectorはあなたのもの。

Light Bulb Lifecycle Comparatorを働かせるのにクライアントは不要です。同じホストされた接続が、あなたのアプリやエージェントのコードにそのまま組み込め、すべてのリクエストに同じガバナンスが適用されます。作るのも、会話するのも、1つの接続で両方。

実測値、推定値ではない

平均836ms。本番環境で高速。

Light Bulb Lifecycle Comparatorは本番サービスに対して毎日チェックされています。

日次平均最大1041ms
10月6日今日
最速日
689ms
最遅日
1041ms
14日間の傾向
改善傾向-15%

クライアントを接続

1つのURL。すべてのクライアント。

Connectorを有効化し、リンクをコピーして、いつも使うクライアントに貼り付けるだけ。4個の機能がすぐに使えます。

プレビューアクセス · プロバイダー認証ではありません

vk_preview_* トークンは Vinkius のプレビューインフラに属します。Claude が Light Bulb Lifecycle Comparator のケイパビリティを検出して表示できるようにし、AI の中でその体験を確認できます。

このトークンは Light Bulb Lifecycle Comparator のアカウントを認証するものではありません。認証情報や実際のアカウントデータが必要なアクションは、Connector を有効化してサービスを承認するまで実行されない場合があります。

Light Bulb Lifecycle Comparator Connector

準備完了です。MCPクライアントを選択し、セットアップ手順に従ってください。

コネクタリンクhttps://edge.vinkius.com/vk_preview_8DA2NISZpNv6Bt2JLDRkltuMiIS3I6ChleO9VIBM/mcp

Claude Desktop

以下の手順で数秒で接続できます。

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — Light Bulb Lifecycle Comparator capabilities are ready to use.
設定 · claude_desktop_config.jsonコピー
{
  "mcpServers": {
    "light-bulb-lifecycle-comparator-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_8DA2NISZpNv6Bt2JLDRkltuMiIS3I6ChleO9VIBM/mcp"
    }
  }
}
  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

各クライアントの手順ガイドはこちらです。 接続方法

Claude向けのガイド付きセットアップ? Light Bulb Lifecycle ComparatorをClaudeや他のAIに設定する

このConnectorが対応するすべてのAIクライアントを見る ↑

対象ユーザー

Light Bulb Lifecycle Comparatorユーザーが任せたい仕事のために。

照明設備の導入や運用コストの管理を行う専門家向けのツールです。経済性と持続可能性の両面から最適な照明を選択できます。

  • 01

    施設管理者

    建物の照明維持費を削減し、長期的な運用コストを最適化するために使用します。

  • 02

    エネルギーコンサルタント

    クライアントに対して、最も効率的でコストパフォーマンスの高い照明ソリューションを提案するために活用します。

  • 03

    購買担当者

    初期購入価格だけでなく、寿命や電気代を含めた総所有コストに基づいて製品を選定します。

FAQ

Light Bulb Lifecycle Comparatorユーザーからのよくある質問。

  • 01

    What is the total cost of ownership for a light bulb?

    It is the sum of the initial purchase price, the cost of electricity used over the bulb's life, and any disposal fees.

  • 02

    How does this MCP help with energy efficiency?

    It uses the lumen-per-watt metric to assign efficiency ratings, helping you identify which bulbs use the least power for the light they produce.

  • 03

    Can I compare different types of bulbs?

    Yes, you can use the comparison capability to rank different bulb configurations and find the most cost-effective choice.

  • 04

    Which AI clients can use this MCP?

    You can use this MCP with any compatible client like Claude, Cursor, Windsurf, or VS Code.

  • 05

    Do I need to host the MCP myself?

    No, Vinkius hosts and manages the MCP for you, so it is ready to use as soon as you connect.

  • 06

    How does the capability calculate the total cost?

    The capability sums the initial purchase price, the cumulative electricity cost based on wattage and runtime, and the disposal costs for all bulbs required over the evaluation period.

  • 07

    Can I compare multiple bulb types at once?

    Yes, you can use compare_bulb_profiles to provide multiple bulb configurations and receive a ranked list from most to least cost-effective.

  • 08

    What factors affect the energy efficiency rating?

    The efficiency rating is determined by the ratio of brightness (lumens) to power consumption (watts) using the get_energy_efficiency_rating capability.

『Light Bulb Lifecycle Comparator』を Claude、Cursor、ChatGPT などに接続