An astronaut overseeing a futuristic data hub

Repair-or-Replace Decision EngineをAIに接続

一度設定すれば、ChatGPT、Claude、Cursorなど、お気に入りのクライアントでどれでも動きます。すべては裏側で安全に動くので、あなたは安心して本当に大切なことに集中できます。資産の最適な維持・更新タイミングを自動判断します

このConnectorについてAIに質問

Vinkiusが開発・運用・ホスティング。

MCP認証済み · 本番環境対応 · Vinkius保証

Waiting for input…

Works with modern AI clients that support MCP, including ChatGPT, Claude, Cursor, and more.

ChatGPTClaudeCursorPerplexityGeminiMicrosoft CopilotRaycastMeta AI

AIが仕事をこなします。私たちが安全に守ります。

他のAIツールではこれは手に入りません。ワークフローはお気に入りのクライアントで動き、アカウントは守られ、エージェントに何を許すかはあなたが決めます。これこそ乗り換えるべき理由です。

すべてのConnectorは当社のインフラストラクチャの中、あなたのワークフローが動くのと同じ場所にあります。下の3つはすでにその一部で、背景で静かに働き、あなたが意識する必要がないようにしてくれます。追加するものも、設定するものも、心配することもありません。

A futuristic MCP client docking bay
V8 Isolate01

各Connectorは独自の密閉された環境内で実行されます。

各Connectorは独自の封印されたV8ランタイムで実行され、ファイル、システム、他のサーバーへのアクセスはありません。Connectorが自身のリクエストを超えて中身を見ることはありません。

Kill Switch02

1つのスイッチで全エージェントを停止。即座に。

1つのアクションで全Connectorを無効化し、全トークンを失効させ、全セッションを終了します。AI Governanceが記録を保持します。

ユーザーごとのFinOps03

驚きではなく、一時停止する支出制限。

各ユーザーは自身の接続と認証情報を持ち、他から隔離されています。支出制限を超える操作は課金されず、あなたの承認を待ちます。

3つのコントロールが、AIが接続するレイヤーに 組み込まれています。

厳選セット · 4機能

届けるのは、本当に必要な動作だけです。

機能セット01 / 01

01-04

このセットには4機能あります。

Repair-or-Replace Decision Engineで使える4機能の一部です。

  1. 01

    修理の妥当性分析

    特定の資産に対して、修理を行うことが物理的および経済的に見て検討に値するかを判断します。

  2. 02

    意思決定プランの作成

    すべての財務データと優先事項を考慮し、最終的な推奨アクションを生成します。

  3. 03

    買い替えオプションの比較

    予算と在庫状況に基づき、最も適切な代替品を特定します。

  4. 04

    保証による影響評価

    保証の適用範囲を考慮して、修理にかかる実質的なコストを算出します。

実際の業務

チームが実際に回している作業

01

IT Hardware Refresh

Decide if a broken workstation should be fixed or replaced with a newer model.

02

Fleet Maintenance

Determine if a vehicle repair is worth the cost given its current age and condition.

03

Warranty Optimization

Check if a repair is covered by an existing warranty before paying out of pocket.

04

Budget Planning

Run multiple scenarios to see how repair costs impact your quarterly maintenance budget.

1つのConnector、すべてのAI

Repair-or-Replace Decision Engineは、最も人気のあるAIクライアントで動きます。

これは最も人気のあるクライアントで、それぞれにステップバイステップのガイドがあります。リンクは1つ、設定は一度、ガバナンスと可視性は最初から組み込み。しかもすべてMCP標準で動くため、同じ接続は他の対応クライアントでもそのまま使えます。作り直す必要はありません。

自社アプリを作っていますか?Connectorはあなたのもの。

Repair-or-Replace Decision Engineを働かせるのにクライアントは不要です。同じホストされた接続が、あなたのアプリやエージェントのコードにそのまま組み込め、すべてのリクエストに同じガバナンスが適用されます。作るのも、会話するのも、1つの接続で両方。

実測値、推定値ではない

平均963ms。本番環境で高速。

Repair-or-Replace Decision Engineは本番サービスに対して毎日チェックされています。

日次平均最大1284ms
9月29日今日
最速日
797ms
最遅日
1284ms
14日間の傾向
改善傾向-30%

クライアントを接続

1つのURL。すべてのクライアント。

Connectorを有効化し、リンクをコピーして、いつも使うクライアントに貼り付けるだけ。4個の機能がすぐに使えます。

プレビューアクセス · プロバイダー認証ではありません

vk_preview_* トークンは Vinkius のプレビューインフラに属します。Claude が Repair-or-Replace Decision Engine のケイパビリティを検出して表示できるようにし、AI の中でその体験を確認できます。

このトークンは Repair-or-Replace Decision Engine のアカウントを認証するものではありません。認証情報や実際のアカウントデータが必要なアクションは、Connector を有効化してサービスを承認するまで実行されない場合があります。

Repair-or-Replace Decision Engine Connector

準備完了です。MCPクライアントを選択し、セットアップ手順に従ってください。

コネクタリンクhttps://edge.vinkius.com/vk_preview_Qae6SQuwS5y0fKZhbSSbrCH9FaYK5l41pAtNhBgS/mcp

Claude Desktop

以下の手順で数秒で接続できます。

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — Repair-or-Replace Decision Engine capabilities are ready to use.
設定 · claude_desktop_config.jsonコピー
{
  "mcpServers": {
    "repair-or-replace-decision-engine-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_Qae6SQuwS5y0fKZhbSSbrCH9FaYK5l41pAtNhBgS/mcp"
    }
  }
}
  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

各クライアントの手順ガイドはこちらです。 接続方法

Claude向けのガイド付きセットアップ? Repair-or-Replace Decision EngineをClaudeや他のAIに設定する

このConnectorが対応するすべてのAIクライアントを見る ↑

対象ユーザー

Repair-or-Replace Decision Engineユーザーが任せたい仕事のために。

This MCP is built for anyone managing physical assets who needs to make fast, data-backed maintenance decisions.

  • 01

    Fleet Managers

    They hand off repair quotes and vehicle condition data to get quick go/no-go decisions.

  • 02

    IT Procurement Officers

    They use it to decide whether to refresh hardware or patch existing devices.

  • 03

    Operations Managers

    They rely on it to balance maintenance budgets against equipment uptime needs.

FAQ

Repair-or-Replace Decision Engineユーザーからのよくある質問。

  • 01

    How does this MCP help with asset management?

    It automates the math behind deciding whether to fix an item or buy a new one by looking at costs, warranties, and budgets.

  • 02

    Can I use this with Claude or Cursor?

    Yes, you can connect this MCP to any compatible client like Claude, Cursor, or Windsurf through the Vinkius platform.

  • 03

    Does it factor in warranty coverage?

    Yes, it includes a capability specifically to calculate how much your warranty reduces the effective cost of a repair.

  • 04

    What kind of recommendations does it give?

    It provides a final decision of REPAIR, REPLACE, or NONE based on the data you provide.

  • 05

    Do I need to host this myself?

    No, Vinkius hosts and manages the MCP so it is ready to use immediately after you connect your client.

  • 06

    How does the engine decide between repair and replacement?

    The decision is made by weighing the final repair cost against the replacement cost, while strictly adhering to your provided budget limit and strategic priorities like cost-minimization or longevity.

  • 07

    Can I use this to manage my maintenance budget?

    Yes. By using calculate_decision_plan, you can ensure that any recommended action stays within your defined budget limit.

  • 08

    Does warranty coverage affect the decision?

    Absolutely. The evaluate_warranty_impact capability adjusts the initial repair quote to reflect the effective cost after applying any remaining warranty coverage.

『Repair-or-Replace Decision Engine』を Claude、Cursor、ChatGPT などに接続