An astronaut overseeing a futuristic data hub

Reverse Cash And Carry Arbitrage EngをAIに接続

一度設定すれば、ChatGPT、Claude、Cursorなど、お気に入りのクライアントでどれでも動きます。すべては裏側で安全に動くので、あなたは安心して本当に大切なことに集中できます。バックワードーション市場の裁定機会を確実に捉える

このConnectorについてAIに質問

Vinkiusが開発・運用・ホスティング。

MCP認証済み · 本番環境対応 · Vinkius保証

Waiting for input…

Works with modern AI clients that support MCP, including ChatGPT, Claude, Cursor, and more.

ChatGPTClaudeCursorPerplexityGeminiMicrosoft CopilotRaycastMeta AI

AIが仕事をこなします。私たちが安全に守ります。

他のAIツールではこれは手に入りません。ワークフローはお気に入りのクライアントで動き、アカウントは守られ、エージェントに何を許すかはあなたが決めます。これこそ乗り換えるべき理由です。

すべてのConnectorは当社のインフラストラクチャの中、あなたのワークフローが動くのと同じ場所にあります。下の3つはすでにその一部で、背景で静かに働き、あなたが意識する必要がないようにしてくれます。追加するものも、設定するものも、心配することもありません。

A futuristic MCP client docking bay
V8 Isolate01

各Connectorは独自の密閉された環境内で実行されます。

各Connectorは独自の封印されたV8ランタイムで実行され、ファイル、システム、他のサーバーへのアクセスはありません。Connectorが自身のリクエストを超えて中身を見ることはありません。

Kill Switch02

1つのスイッチで全エージェントを停止。即座に。

1つのアクションで全Connectorを無効化し、全トークンを失効させ、全セッションを終了します。AI Governanceが記録を保持します。

ユーザーごとのFinOps03

驚きではなく、一時停止する支出制限。

各ユーザーは自身の接続と認証情報を持ち、他から隔離されています。支出制限を超える操作は課金されず、あなたの承認を待ちます。

3つのコントロールが、AIが接続するレイヤーに 組み込まれています。

厳選セット · 3機能

届けるのは、本当に必要な動作だけです。

機能セット01 / 01

01-03

このセットには3機能あります。

Reverse Cash-and-Carry Engineで使える3機能の一部です。

  1. 01

    裁定シグナルの算出

    過去または当日の市場データに基づき、裁定取引のシグナルを判定し、ポジションパラメータを算出します。

  2. 02

    リスク指標の評価

    現在の市場環境のリスクプロファイルを分析し、戦略の実行が安全であるかを検証します。

  3. 03

    理論適正価格の取得

    特定の時点における先物契約の理論的な市場適正価格を算出します。

実際の業務

チームが実際に回している作業

01

Backwardation Exploitation

Identify when futures are underpriced relative to spot prices to execute reverse cash-and-carry trades.

02

Risk Assessment

Check if high convenience yield volatility makes a specific arbitrage opportunity too dangerous to take.

03

Contract Valuation

Determine the fair market value of a futures contract during periods of high interest rate shifts.

04

Position Sizing

Get exact margin requirements and position sizes for a calculated arbitrage signal.

1つのConnector、すべてのAI

Reverse Cash-and-Carry Engineは、最も人気のあるAIクライアントで動きます。

これは最も人気のあるクライアントで、それぞれにステップバイステップのガイドがあります。リンクは1つ、設定は一度、ガバナンスと可視性は最初から組み込み。しかもすべてMCP標準で動くため、同じ接続は他の対応クライアントでもそのまま使えます。作り直す必要はありません。

自社アプリを作っていますか?Connectorはあなたのもの。

Reverse Cash-and-Carry Engineを働かせるのにクライアントは不要です。同じホストされた接続が、あなたのアプリやエージェントのコードにそのまま組み込め、すべてのリクエストに同じガバナンスが適用されます。作るのも、会話するのも、1つの接続で両方。

実測値、推定値ではない

平均845ms。本番環境で高速。

Reverse Cash-and-Carry Engineは本番サービスに対して毎日チェックされています。

日次平均最大1104ms
10月3日今日
最速日
741ms
最遅日
1104ms
14日間の傾向
遅延傾向+5%

クライアントを接続

1つのURL。すべてのクライアント。

Connectorを有効化し、リンクをコピーして、いつも使うクライアントに貼り付けるだけ。3個の機能がすぐに使えます。

プレビューアクセス · プロバイダー認証ではありません

vk_preview_* トークンは Vinkius のプレビューインフラに属します。Claude が Reverse Cash-and-Carry Engine のケイパビリティを検出して表示できるようにし、AI の中でその体験を確認できます。

このトークンは Reverse Cash-and-Carry Engine のアカウントを認証するものではありません。認証情報や実際のアカウントデータが必要なアクションは、Connector を有効化してサービスを承認するまで実行されない場合があります。

Reverse Cash-and-Carry Engine Connector

準備完了です。MCPクライアントを選択し、セットアップ手順に従ってください。

コネクタリンクhttps://edge.vinkius.com/vk_preview_fh0aShAjwbfl0RgkZ0lI4FUqm2LVVXRfeN3Imfv0/mcp

Claude Desktop

以下の手順で数秒で接続できます。

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — Reverse Cash-and-Carry Engine capabilities are ready to use.
設定 · claude_desktop_config.jsonコピー
{
  "mcpServers": {
    "reverse-cash-and-carry-arbitrage-engine-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_fh0aShAjwbfl0RgkZ0lI4FUqm2LVVXRfeN3Imfv0/mcp"
    }
  }
}
  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

各クライアントの手順ガイドはこちらです。 接続方法

Claude向けのガイド付きセットアップ? Reverse Cash-and-Carry EngineをClaudeや他のAIに設定する

このConnectorが対応するすべてのAIクライアントを見る ↑

対象ユーザー

Reverse Cash-and-Carry Engineユーザーが任せたい仕事のために。

コモディティや先物市場における裁定取引を専門とするプロフェッショナル向けに設計されています。数学的なモデルに基づいた精密な意思決定を必要とする層に適しています。

  • 01

    クオンツ・トレーダー

    決定論的なモデルを用いて、バックワードーション市場での収益機会を自動的に特定したい専門家。

  • 02

    リスクマネージャー

    借入コストやイールドの変動から、裁定戦略の安全性を定量的に評価したい担当者。

  • 03

    コモディティ戦略アナリスト

    先物と現物の価格差(ベーシス)を分析し、市場の歪みを調査するアナリスト。

FAQ

Reverse Cash-and-Carry Engineユーザーからのよくある質問。

  • 01

    What is a reverse cash-and-carry arbitrage?

    It is a strategy used in backwardation markets where futures are trading at a discount to the spot price, allowing for arbitrage by selling the expensive spot and buying the cheaper futures.

  • 02

    Which AI clients can use this MCP?

    You can use this MCP with any compatible client including Claude, Cursor, Windsurf, and VS Code.

  • 03

    How does the engine calculate fair value?

    The engine uses the cost of carry, which includes risk-free rates, borrowing costs, and convenience yields to find the theoretical price.

  • 04

    Does this MCP handle risk management?

    Yes, it includes a capability to evaluate risk metrics by analyzing borrowing costs and convenience yield volatility.

  • 05

    Do I need to host the MCP myself?

    No, Vinkius hosts and manages the MCP for you. You just connect your client and start using the capabilities.

  • 06

    What is the primary market condition this capability targets?

    The engine specifically targets backwardation, where futures prices are lower than the spot price, allowing for a reverse cash-and-carry strategy.

  • 07

    How are trade signals generated?

    Signals are generated via calculate_arbitrage_signals when the actual futures price is lower than the theoretical fair value minus transaction costs, provided the annualized basis is below -8% and liquidity requirements are met.

  • 08

    Can I assess the risk of a trade before executing?

    Yes, you can use evaluate_risk_metrics to analyze the risk profile, including borrowing costs and potential spikes in convenience yield.

『Reverse Cash-and-Carry Engine』を Claude、Cursor、ChatGPT などに接続